• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.6 no.2
• /
• pp.11-18
• /
• 1992

• Korean Journal of Optics and Photonics
• /
• v.25 no.2
• /
• pp.102-107
• /
• 2014

In this paper the spectra of correlated color temperature (CCT) tunable white light-emitting diode (LED) luminaires, consisting of commercial red, green, blue, and amber LED chips, were optimized to increase color rendering index (CRI), and a special CRI of R9 for deep red color was obtained. To improve the design's accuracy, measured LED spectra were used instead of mathematically modeled ones. Real CCT tunable LED luminaires with CRIs of 87-90 and R9s of 34-93 were fabricated and demonstrated at CCTs of 3000-6000 K.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1993.10a
• /
• pp.17-21
• /
• 1993

본 램프는 자체설계제작 기술에 의해 개발된 것으로서 국내 여건에 맞게 시동전압, 광속, 연색지수등에 중점을 두고 개발하였다. 시동특성, 밝기 연색지수 등 거의 모든 면에 있어서 선진제품과 동등수준, 그이상이다. 아직까지 수명시험이 완료되지않아 정확한 평가를 내릴수는 없으나 초기특성에 있어서는 선진제품보다 우수하다. 이번에 개발완료한 옥내용 메탈할라이드 램프는 점포조명, 전시장조명용으로 각광을 받고있으며 현재 전량 수입에 의존하고있다. 국내여건에 맞게 설계제작된 본 램프가 본격생산되는 94년 초가 되며는 수입을 억제 국내조명산업을 보호할수 있으리라 생각된다.

• Korean Journal of Optics and Photonics
• /
• v.32 no.5
• /
• pp.220-229
• /
• 2021

The optical characteristics of high-power direct-lit white light-emitting diode (LED) lighting were investigated, where a quantum dot (QD) film was adopted to enhance the color-rendering index (CRI). The transmittance of the diffuser plate and the concentration of the QD film were varied in this study. The color coordinates and the correlated color temperature (CCT) did not show any appreciable change, while the CRI values increased slightly as the transmittance of the diffuser plate decreased. The investigated optical properties were nearly independent of the viewing angle, and the luminance distribution was close to Lambertian. The CCT decreased from approximately 6000 K to approximately 4000 K as the concentration of the QD film increased from 0 to 7.5 wt%, which was due to the enhanced red component in the emission spectrum. The CRI increased to approximately 95 for some optical configurations of the lighting. These results demonstrate that glare-free, color-changeable, high-rendering LED lighting can be realized by using a combination of a diffuser plate of appropriate transmittance and a red QD film.

• Korean Journal of Optics and Photonics
• /
• v.32 no.4
• /
• pp.163-171
• /
• 2021

Conventional white light-emitting diodes (LEDs) for lighting applications consist of blue LEDs and yellow phosphors, the spectrum of which lacks deep red. To improve the color-rendering characteristics of white LEDs, a red quantum-dot film was applied to the diffuser plate of LED lighting. The mean free paths of the quantum dots and the concentration of the TiO₂ particles in the diffuser plate were adjusted to optimize the optical structure of the lighting. The color-rendering index (CRI) was greater than 90 for most conditions, which demonstrates that adoption of the red quantum-dot film is an effective way for improving the color-rendering properties of conventional white LEDs. The angular dispersion of color coordinates could be removed by utilizing the optical cavity formed between the diffuser plate and the reflector on the bottom of the lighting, where multiple passages of the light through the quantum-dot film reduced the differences in optical path length depending on the viewing angle.

• Science of Emotion and Sensibility
• /
• v.9 no.4
• /
• pp.353-366
• /
• 2006

The aim of this study is to characterize the optical properties of white light-emitting diodes lighting modules and then to evaluate the sensitivity of students and teachers in reacting to the optical properties of these modules. For the sake of this study, each of 5 lighting modules was introduced to the 5 test cabinets. The 5 test cabinets were evaluated and analyzed the student and teacher's sensitivity reaction. We have selected If questions on sensitivity of the lighting and evaluated these questions with semantic differential method. To verify the reliability and objectivity of the questions, the feasibility survey was carried out by a preliminary test. As a result of the test, the sensitivities on the test cabinets were classified the 4 factors, namely, activity as the first factor, stability as the second one , potency as the third one and sensitive image as the fourth one respectively. By the evaluation of student and teacher's sensitivity on the correlated color temperature, they preferred the cabinet with the higher color temperature in view of the activity and potency. And they preferred the cabinet with the lower color temperature in view of the stability factor. In the sensitive image, they preferred the 5800K, bluish white lighting regardless of the color temperature. By the evaluation on the color rendering index, they preferred the cabinet with the higher color rendering index in view of the activity, stability and sensitive image. In the potency factor, they preferred the white lighting with the middle color rendering index.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.04a
• /
• pp.755-758
• /
• 2015

LED 부품소재 분야에서 가장 높은 특허 분쟁율을 나타낸 신물질 형광체는 외부로부터 흡수된 에너지를 가시광선 영역의 빛 에너지로 변환시켜주는 무기 발광 물질로 LED에서 직접적으로 빛을 내는 역할을 하는 핵심소재로 LED 전체의 발광 특성(광 변환 효율, 휘도, 연색지수 등) 향상이 가능하므로, 고온에서도 발광강도의 안정성을 유지할 수 있는 형광체에 대한 기술이 유망할 것으로 판단된다.

• Korean Journal of Optics and Photonics
• /
• v.35 no.3
• /
• pp.95-106
• /
• 2024

In the 21st century, white light-emitting diodes (LEDs) are widely used as backlighting for liquid crystal displays and as a light source for general illumination. However, white LEDs used in lighting often use a single yellow phosphor on top of a blue LED chip, which lacks the ability to reproduce natural colors in objects under conventional illumination accurately. Recently, researchers have been actively working on realizing high color-rendering lighting by incorporating red quantum dots to improve the spectrum in the long-wavelength band, which is deficient in conventional white LEDs. In particular, how to develop and apply remote quantum dot components to ensure long-term reliability is currently under active research. This paper introduces recent research on remote quantum dot components and the current status of developing high color-rendering lightings with them. Especially, we focus on various factors that are important to consider in optimizing the optical structure of the quantum dot components and discuss the future directions and prospects of research for high color-rendering lighting technology.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.89-94
• /
• 2007

이 논문에서는 100W급 Discrete LED 투광기 조명 제품 개발에 관한 것으로, 3W RGBA LED를 이용하여 광색 및 색온도 제어가 가능하도록 광학/방열/회로/시스템 설계를 통한 시제품을 제작하였다. 그 결과, 색온도 $2,000{\sim}10,000K$ 범위에서 흑체궤적에 정확히 일치하면서 연색지수가 $71{\sim}91$까지 고연색성을 실현하였으며, 동작전압 $90{\sim}250VAC$, 효율 87%, 역률 93이상의 양호한 전기적 특성을 나타냈다. 또한 투광기의 협각/중각/광각 배광을 만족하기 위하여 LED 렌즈를 설계하였으며, 신뢰성 확보 및 주위온도에 따른 광출력 변화를 최소화할 수 있는 방열설계를 실시하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.4
• /
• pp.15-21
• /
• 2004

The optical characteristics; luminous flux, correlated color temperature, and CIE -chromaticity coordinate etc., of HB LED(high brightness light emitting diode) of yellow/green/white SMD(surface mounted device) type were tested with integrating sphere photometer and monochromator, and the results were comparatively evaluated And, for the white LED, color rendering indices were considered to analyze.