• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.7 s.349
• /
• pp.60-71
• /
• 2006

Group key agreement protocols are designed to allow a group of parties communicating over a public network to securely and efficiently establish a common secret key, Over the years, a number of solutions to the group key agreement protocol have been proposed with varying degrees of complexity, and the research relating to group key agreement to securely communicate among a group of members in integrated wired and wireless networks has been recently proceeded. Both features of wired computing machines with the high-performance and those of wireless devices with the low-power are considered to design a group key agreement protocol suited for integrated wired and wireless networks. Especially, it is important to reduce computational costs of mobile devices which have the limited system resources. In this paper, we present an efficient group key agreement scheme which minimizes the computational costs of mobile devices and is well suited for this network environment and prove its security.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.7 s.349
• /
• pp.32-40
• /
• 2006

It is very important to establish a pairwise key securely in wireless sensor networks. Because sensor networks consist of devices with weak physical security, they are likely to be compromised by an attacker. However, some approaches using key pre-distribution and other approaches using one hop local keys are known to be very vulnerable to threats caused by compromised nodes, even a small number. This paper proposes a scheme where each node establishes three hop local keys and employs them for a later pairwise key establishment. When any two nodes agree a pairwise key, all nodes on the route between two nodes contribute to the agreement of the pairwise key. Here, the initial three hop local keys are employed for encrypting a secret key delivered from a node to other nodes. Therefore, the proposed scheme bothers attackers to compromise much more nodes than the scheme using one hop local keys only. The simulation results have proven that the proposed scheme provides better performance and higher security than the scheme using one hop local keys in terms of message exchange, the number of encryption and decryption, and pairwise key exposure rate.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.4
• /
• pp.361-373
• /
• 2002

In this paper, we propose a channel normalization method to improve the performance of CMS (cepstral mean subtraction) which is widely adopted to normalize a channel variation for speech and speaker recognition. CMS which estimates the channel effects by averaging long-term cepstrum has a weak point that the estimated channel is biased by the formants of voiced speech which include a useful speech information. The proposed Formant-broadened Cepstral Mean Subtraction (FBCMS) is based on the facts that the formants can be found easily in log spectrum which is transformed from the cepstrum by fourier transform and the formants correspond to the dominant poles of all-pole model which is usually modeled vocal tract. The FBCMS evaluates only poles to be broadened from the log spectrum without polynomial factorization and makes a formant-broadened cepstrum by broadening the bandwidths of formant poles. We can estimate the channel cepstrum effectively by averaging formant-broadened cepstral coefficients. We performed the experiments to compare FBCMS with CMS, PFCMS using 4 simulated telephone channels. In the experiment of channel estimation, we evaluated the distance cepstrum of real channel from the cepstrum of estimated channel and found that we were able to get the mean cepstrum closer to the channel cepstrum due to an softening the bias of mean cepstrum to speech. In the experiment of text-independent speaker identification, we showed the result that the proposed method was superior than the conventional CMS and comparable to the pole-filtered CMS. Consequently, we showed the proposed method was efficiently able to normalize the channel variation based on the conventional CMS.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.11 s.114
• /
• pp.1120-1131
• /
• 2006

This paper describes the numerical analysis techniques using the Combined Integration/Matrix Method to calculate ground potential rise which can be occurred in the various grounding systems. Combined Integration/Matrix Method is used to reduce the error and computation time with the analytical integration equation and the proper segmentaion of earth embedded conductor. To do it, optimal segmentaion method for the buried conductors is presented through error analysis which is capable of applying the practical scaled various grounding systems. The optimum length of segmented element is much co-related with the buried depth of grounding electrode and the maximum length of buried electrode. As a result, less 3 precent errors was obtained by proposed model. The proposed model is applied to verify an effect of multi-grounding problems which was aroused much controversy with separated or common grounding between the high power grounding system and low power grounding system such as signal and telecommunication grounding.

• Journal of Sensor Science and Technology
• /
• v.6 no.5
• /
• pp.385-391
• /
• 1997

An objection of this study is to develop a measuring circuit of a gauge using radioisotope for compaction control. The gauge developed in this study makes use of radioisotope with the activity exempted from domestic atomic law and consists of measuring circuits for gamma-rays and thermal neutrons, a high voltage supply unit, and a microprocessor. To obtain meaningful numbers of pulse counts, parallel five and two circuits are provided for gamma-rays and thermal neutrons, respectively. Being simple in electrical characteristics of G-M detector for gamma-rays, pulses are counted through only a shaping circuit. Very small pulses generated from He- 3 proportional detector for thermal neutrons are amplified to the maximum of 50 [dB] and a window comparator accepts only pulses with meaning. To minimize effects of natural environmental radiation and electrical noise, circuits are electrostatically shielded and pulses made by ripples are eliminated by taking frequency of high voltage supplied to the circuit and pulse height of ripples into consideration. One-chip microprocessor is applied to process various counts, results are stored and the gauage is made capable to communicate with PC. Enough and meaningful numbers of pulses are counted with the prototype gauage for compaction control.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.2091-2098
• /
• 2006

In this paper, it proposes a protocol of resource adaptive data dissemination for sensor nodes in a wireless sensor network. In general, each sensor node used in a wireless sensor network delivers the required information to the final destination by conducting cooperative works such as sensing, processing, and communicating each other using the battery power of a independent sensor node. So, a protocol used for transferring the acquired information to users through the wireless sensor network can minimize the power consumption of energy resource given to a sensor node. Especially, it is very important to minimize the total amount of power consumption with a method for handling the problems on implosion. data delivery overlapping, and excessive message transfer caused by message broadcasting. In this paper, for the maintaining of the shortest path between sensor nodes, maximizing of the life time of a sensor node and minimizing of communication cost, it presents a method for selecting the representative transfer node for an event arising area based on the negotiation scheme and maintaining optimal transfer path using hop and energy information. Finally, for the performance evaluation, we compare the proposed protocol to existing directed diffusion and SPIN protocol. And, with the simulation results, we show that the proposed protocol enhances the performance on the power consumption rate when the number of overall sensor nodes in a sensor network or neighbor sensor nodes in an event area are increased and on the number of messages disseminated from a sensor node.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.437-441
• /
• 2006

Wireless sensor network consists of sensor nodes which are disseminated closely to each other to collect informations for the various requests of a sensor application applied for sensing phenomenons in real world. Each sensor node delivers sensing informations to an end user by conducting cooperative works such as processing and communicating between sensor nodes. In general, the power supply of a sensor node is depends on a battery so that the power consumption of a sensor node decides the entire life time of a sensor network. To resolve the problem, optimal routing algorithm can be used for prolong the entire life time of a sensor network based on the information on the energy level of each sensor node. In this paper, different from the existing Directed Diffusion and SPTN method, we presents a data dissemination protocol based on lower-power consumption that effectively maximizes the whole life time of a sensor network using the informations on the energy level of a sensor node and shortest-path hops. With the proposed method, a data transfer path is established using the informations on the energy levels and hops, and the collected sensing information from neighboring nodes in the event-occurring area is merged with others and delivered to users through the shortest path.

• Journal of KIISE:Information Networking
• /
• v.29 no.4
• /
• pp.412-427
• /
• 2002

This paper proposes a restoration scheme based on mobility learning and prediction in the presence of the failure of mobility databases in mobile communication systems. In mobile communication systems, mobility databases must maintain the current location information of users to provide a fast connection for them. However, the failure of mobility databases may cause some location information to be lost. As a result, without an explicit restoration procedure, incoming calls to users may be rejected. Therefore, an explicit restoration scheme against the failure of mobility databases is needed to guarantee continuous service availability to users. Introducing mobility learning and prediction into the restoration process allows systems to locate users after a failure of mobility databases. In failure-free operations, the movement patterns of users are learned by a Neuro-Fuzzy Inference System (NFIS). After a failure, an inference process of the NFIS is initiated and the users' future location is predicted. This is used to locate lost users after a failure. This proposal differs from previous approaches using checkpoint because it does not need a backup process nor additional storage space to store checkpoint information. In addition, simulations show that our proposal can reduce the cost needed to restore the location records of lost users after a failure when compared to the checkpointing scheme

• Journal of radiological science and technology
• /
• v.21 no.1
• /
• pp.35-39
• /
• 1998

We analyzed image factors to determine the characteristic factors that need for intelligent replenishment system of the auto film processor. We processed the serial 300 sheets of radiographic films of chest phantom without replenishment of developing and fixation replenisher. We took the digital data by using film digitizer which scaned the films and automatically summed up the pixel values of the films. We analyzed characteristic curves, average gradients and relative speeds of individual film using densitometer and step densitometry. We also evaluated the pH of developer, fixer, and washer fluid with digital pH meter. Fixer residual rate and washing effect were measured by densitometer using the reagent methods. There was no significant reduction of the digital density numbers of the serial films without replenishment of developer and fixer. The average gradients were gradually decreased by 0.02 and relative speeds were also gradually decreased by 6.96% relative to initial standard step-densitometric measurement. The pHs of developer and fixer were reflected the inactivation of each fluid. The fixer residual rates and washing effects after processing each 25 sheets of films were in the normal range. We suggest that the digital data are not reliable due to limitation of the hardware and software of the film digitizer. We conclude that average gradient and relative speed which mean the film's contrast and sensitivity respectively are reliable factors for determining the need for the replenishment of the auto film processor. We need more study of simpler equations and programming for more intelligent replenishment system of the auto film processor.

• Journal of IKEEE
• /
• v.25 no.3
• /
• pp.485-492
• /
• 2021

In this paper, we propose the development of a defect inspection system for polygonal containers. Embedded board consists of main part, communication part, input/output part, etc. The main unit is a main arithmetic unit, and the operating system that drives the embedded board is ported to control input/output for external communication, sensors and control. The input/output unit converts the electrical signals of the sensors installed in the field into digital and transmits them to the main module and plays the role of controlling the external stepper motor. The communication unit performs a role of setting an image capturing camera trigger and driving setting of the control device. The input/output unit converts the electrical signals of the control switches and sensors into digital and transmits them to the main module. In the input circuit for receiving the pulse input related to the operation mode, etc., a photocoupler is designed for each input port in order to minimize the interference of external noise. In order to objectively evaluate the accuracy of the development of the proposed polygonal container defect inspection system, comparison with other machine vision inspection systems is required, but it is impossible because there is currently no machine vision inspection system for polygonal containers. Therefore, by measuring the operation timing with an oscilloscope, it was confirmed that waveforms such as Test Time, One Angle Pulse Value, One Pulse Time, Camera Trigger Pulse, and BLU brightness control were accurately output.