• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.155-160
• /
• 1993

연삭가공은 숫돌의 입자가 마멸,파쇄,탈락,생성의 과정을 반복하면서 가공하는 것으로 연삭과정은 사용하는 연삭숫돌의 종류, 드레싱조건,연삭조건 등의 인자에 영행을 받는다. 더욱이 연삭숫돌의 연삭성능은 연삭가공시간의 경과에 따라 변화한다. 이때 요구되는 가공능률과 가공정밀도를 일정하게 유지하기 위해서는 연삭과정을 자동감시하고 이상상태를 진단하는 기술의 확립이 필수적이다. 본 연구에서는 AE를 이용하여 평면연삭에 있어서 연삭숫돌의 종류별(WA계 비트리파이드 및 레지노이드결하ㅂ제연삭숫돌 36종류) 및 연삭조건을 변화시켰을때의 연삭저항 및 AE 신호의 변화등을 In-process 검출하여 연삭가공상태의 자동감시 및 자동이상진단시스템을 위한 AE의 적용 가능성을 검토하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 춘계학술대회 논문집
• /
• pp.86-91
• /
• 1993

연삭숫돌은 드레싱에 의해 초기숫돌면의 상태가조정되며, 가공과 더불어 공작물과 연삭숫돌의 연속적인 간섭으로 공작물의 치수변화와함께 연삭숫돌도 작업면이 변화하게 된다. 공작물의 표면은 연삭조건 및 공작물과 숫돌의 접촉특성에 따라 Rubbging, Ploughing, Cutting 작용이 이루어져 가공면이 형성되며 이때의 공작물의 표면 품위( Surface Integrity)는 연삭숫돌의 상태변화에따라 매우 민감하게 영향을 받는다. 본 연구에서는 원통연삭작업 에서의 감시 및 진단기술개발을 위하여 AE 센서의 적용가능성을 살펴보기위하여, 센서의 설치위치에 따른 영향 및 연삭가공 특성을 잘나타내는 AE Parameter의 선정을 위한 실험을 수행하며, 가공시간에 따른 연삭숫돌작업면 의 상태변화에 의한 AE Parameter의 변화를 조사하며, 이와더불어 연삭중의 법선저항을 측정분석하고 통계적인 수법으로 ARMA (Autoregressive Moving Average)을 이용하여 가공특성변화를 분석한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.103-107
• /
• 1994

본 연구에서는 원통 프런지 연삭에서 비가공시간을 줄이기 위해, 공연삭시간 단축과 드레싱 신호를 이용한 숫돌 손상상태 검출에 관한 연구를 수행하였다. 연삭기의 심압대에 설치한 AE센터와 숫돌 덮개에 설치한 초음파센서를 이용해 공연삭, 공작물과 숫돌의 근접, 접촉상태를 감시하고 이에 대응해 적절히 이송속도를 제어했다. 그리고 드리싱시 나타나는 AE 신호의 표준편차를 이용해 숫돌의 손상상태를 검출해서, 드레싱 기회에 대한 효과적인 정보를 제공합으로써 비가공 시간을 단축했다.

• 한국정밀공학회지
• /
• 제16권1호통권94호
• /
• pp.108-115
• /
• 1999

Since grinding is a more complicated process than any other machining process, it is hard for operators to setup a grinding machine properly and to find out correctly abnormal grinding states resulting in damages to products. Abnormalities would be caused by improper setup, improper dressing/grinding conditions which are likely to be occurred without skilled operators' attention. In this study, an AE monitoring unit is developed to help operators conduct with ease setup, and set properly dressing/grinding conditions. AErms(root-mean-square) signal being monitored, on-going process states during grinding and dressing is visualized for machine operators to judge whether the processes are in good condition. Evaluation tests are carried out on centerless grinding machines-both cylindrical and internal. The developed AE monitoring system is verified to be useful to check grinding/dressing states in process even in the centerless grinding of which process is most unknown among various grinding methods because of the complex structure.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.599-602
• /
• 2000

A new dressing technique with utilizes electrolytic phenomenon for realizing effective mirror surface grindings with metal bonded super-abrasive wheels is called “Electrolytic In-process Dressing Grinding”. This technique enabled metal bonded micro-grain wheels, such as micro-grain cast iron fiber bonded wheels, to be used for mirror surface finish processes effectively. But this technique requires a lot of knowledge and experience to perform. And the condition of dressing is variable according to the time. Therefore adaptation of Monitoring and Control technique is needed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.307-308
• /
• 2009

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.387-390
• /
• 1997

Grinding process takes a long time that grinding machine is setted properly. It is difficult for user to judge correctly the abnormal states generated in grinding process. Air grinding has to be reduced for the improvement of productivity. In addition, it is important to monitor the dressing and the grinding process so that the grinding working maintains optimal grinding conditions. In this study, the monitoring system using the acoustic emission is developed to monitor these processes continuously. This system was able to reduce the preparation as well as the machine setting time in grinding operation.

• 한국생산제조학회지
• /
• 제8권1호
• /
• pp.74-80
• /
• 1999

Recently, manufacturing work has been transformed to small scale production form with various types to act up to user's expectation from mass production with a little items required in the past. Then FMS using NC type machinaries has been applied actively also in domestic manufacturing line to meet thus tendency, but there are many machining troubles occured during work process not be settled yet. Nowdays high efficiently has been required no less than high precision in grinding work for the improvement of productivity. In this study, to represent more advance FMS can be adapted to thus situation In-process type monitoring method using AE and Current sensors is suggested to investigate the machining condition in grinding process. As results form this experimental study, it is recognized well that grinding conditions and dressing point of in time cab be estimated effectively using monitoring method suggested. Furthermore, surface shape of grinding wheel on voluntary point of in time can be predicted indirectly through the observation and comparison of AE signal waveform obtained as performance of continuous dressing work.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.125-130
• /
• 1994

Recently,manufacturing work been transformed to small acale production from with various items to act up to user's expectation from mass production with a little items required in the past. The FMS using NC type mother machinaries has been applied actively also in domestic manufacturing line to meet thus tendancy, but there are many machining troubles occured in work process not be settled yet. Nowdays high efficiency has been required no less than high precision in grinding work for the improvement of productivity. In this study, to represent more advanced FMS can be adapted to thus situation In-process type monitoring method using AE and Current sensors is suggested to investigatethe machining condition in grinding process. As results from this experimental study, is is recoqnized well that grinding conditions and dressing point of in time can be estimated effectively using monitoring method suggested. Furthermore, surface shape of grinding wheel on voluntary point of in time can be predicted indirectly through the observation and comparison of AE signal waveform obtained as performance of continuous dressing work.