• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.43-47
• /
• 2002

In this study, through the experimental results of grinding ratio, grinding force and surface roughness with the obtained wear amount of diamond wheel and ceramic material during the grinding process, the following conclusions could be found. In the case of $Si_3N_4$, the wear of diamond wheel is large while the grinding force is stable and the range of change in surface roughness is small. for the case of $AL_2O_3$ and $ZrO_3$, while the wear of diamond wheel is getting smaller, the grinding force is increasing but the value of surface roughness is decreasing. For grinding with the vitrified bond wheel, it seems that the self-sharpening can be found for $Si_3N_4$ and the glazing effect of the cutting edge for $AL_2O_3$ and $ZrO_3$.

• 한국재료학회지
• /
• 제5권4호
• /
• pp.490-500
• /
• 1995

다이아몬드와는 달리 CBN은 철족 재료 연삭시 화학적 마모가 거의 없다. 이러한 장점으로 인해 CBN휠이 철강 재료 연삭에 널리 사용되고 잇는 것이다. 그러나 CBN 휠의 성능은 CBN을 붙잡고 있는 결합제에 크게 의존한다. 오늘날 널리 사용되는 결합제인 주석 청동 합금은 내마모성에 한계가 있다. 주석 청동 합금의 내마모성을 증대시키기 위해 Co를 첨가하였다. 이러한 기지합금에 젖음성을 향사시키기위해 Co코팅 CBN을 사용하였다. 기지합금에 20%co를 첨가한 것이 입계에서 연속적인 $\delta$상생성, 취성 증가에 따라 자생작용이 활발하였다. 가장 높은 연삭비를 나타낸 것은 Cu-15wt%Sn, cu-33wt%Sn, co를 40:40:20으로 제작한 휠이었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.862-865
• /
• 2000

The surface grinding of STD-11 was attempted on the machining center. Grinding experiments were performed at the various grinding conditions and the grinding force, machining error, grinding ratio, and surface roughness were measured. The experimental results indicate that the grinding ratio decreases as the table speed and depth of cut increase. The surface roughness of ground surface was not affected by the change of depth of cut. The surface roughness values obtained on the experiments were 0.02 ～ 0.03${\mu}{\textrm}{m}$ which are fairy good and acceptable for ground surface.

• 대한기계학회논문집
• /
• 제13권5호
• /
• pp.837-846
• /
• 1989

본 연구에서는 일반적인 평벨트 구동의 Eytelwein식을 이용하여 가공물이 풀리와 풀리사이의 벨트에서 연삭되는 벨트 접촉식 연삭에서 벨트 장력분포를 이론 및 실험적으로 구하고 벨트와 풀리사이의 내접촉 특성을 밝혀 벨트 연삭장치의 효율 개선을 위한 설계자료를 구하고자 하였다.

• 한국정밀공학회지
• /
• 제12권8호
• /
• pp.99-105
• /
• 1995

This paper provides a highly efficient grinding for ferrous materials using ELID-grinding method. The grinding efficiency using ELID gring method with CIFB-cBN wheel and CB-cBN wheel is compared with general grinding method with V-cBN wheel. This paper measured grinding ratio for plunge grinding and grinding resistance for traverse grinding in order to investigate grinding ability. The results show that ELID grinding methods is useful for the high efficient grinding of ferrous materials.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 춘계학술대회 논문집
• /
• pp.142-145
• /
• 1993

유정압베어링은 공기베어링과같은 유막의 평균화 효과를 얻을 수 있어 구성부품의 형상오차보다 우수한 회전정도를 기대 할 수 있으며 상대적으로 높은 강성, 부하용량 및 우수한 감쇠특성을 보유하고 있으면서도 비접촉에 의한 무보수, 반영구적 인 수명등의 장점이 있어 정밀도와 강성이 함께 요구되는 연삭기를 중심으로 공작기계 분야에 활발히 응용되고 있다. 본 연구에서는 고정밀도가 요구되는 연삭기용 유정압주축을 시작하고 정특성, 회전특성, 열특성등을 실험적으로 해석함으로서 실용화에 필요한 제변수들의 영향을 정량적으로 얻고자 하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.846-849
• /
• 2000

세라믹 재료는 높은 강도 및 결도를 갖는 기계적 성질로 인하여 연삭가공에는 다이아몬드를 지립으로 하는 초지립 숫돌이 사용된다. 다이아몬드는 일반지립에 비하여 내마모성이 월등하게 높다는 사실로부터 숫돌의 트루잉 및 드레싱 작업이 극히 곤란한 것은 주지의 사실이다.(중략)

• 한국정밀공학회지
• /
• 제14권6호
• /
• pp.44-51
• /
• 1997

Crinding of stainless steel, aluminium alloy, copper alloy, and titanium alloy are difficult to obtain high quality finish, because they have the mechanical properties such as low hardness, high toughness. The low hardness and the high toughness result in the loading of wheel and the poor surface finish. In order to perform the grinding operations for these sorts of materials easily, the discontinuous grinding wheel wiht multi-porous grooves has been newly developed. The multi-porous grooves inthe discontinuous grinding wheel were formed during grinding wheel manufacturing process. In this paper, discontinuous grinding wheels having intermittent ratio 0.66, 0.81 and number of grooves 18,32 have been manufactured and grinding surface characteristics of these grinding wheels for SUS304 have been analyzed. Discontinuous grinding temperature according to intermittent ratiohas been also estimated by simulation. The discontinuous grinding wheels increase the grinding performance considerably. It is desirable to use the discontinuous grinding wheel in grinding the materials with high efficiency and accuracy.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.16-21
• /
• 2004

As a new approach to analyze grinding energy, this paper introduces a specific grinding energy model based on the average grain. Using this model, grinding characteristics such as radial and tangential forces, specific grinding energy of SM45C were investigated altering grinding variables such as workpiece velocity(v) and apparent depth of cut(Z) in down-surface grinding. From the experimental results, there is no significant difference between the radial, tangential forces and vertical. horizontal forces because of small contact angle between wheel and workpiece. The specific grinding energy decreases as the maximum undeformed chip thickness increases. But, there is much difference between the specific grinding energies of the existing and the proposed model.

• 한국공작기계학회논문집
• /
• 제14권4호
• /
• pp.61-68
• /
• 2005

As a new approach to analyze grinding energy, this paper introduces a specific grinding energy model based on the average grain. Using this model, grinding characteristics such as radial and tangential forces, specific grinding energy of SM45C were investigated with changing grinding variables such as workpiece velocity(v) and apparent depth of cut(Z) in down-surface grinding. From the experimental results, the specific grinding energy decreases as the maximum undeformed chip thickness increases. And there is no significant difference between the specific grinding energies of the existing and the proposed model.