• Title/Summary/Keyword: 연료 감소

Search Result 1,148, Processing Time 0.028 seconds

Production of Water/n-decane Emulsion Fuel and Evaluation of Rheological Stability (물/n-데칸 에멀젼 연료의 제조 및 유변학적 안정성 평가)

  • Kim, Hye Min
    • Journal of Aerospace System Engineering
    • /
    • v.11 no.4
    • /
    • pp.8-14
    • /
    • 2017
  • In this study, the production of proper emulsion fuel and the evaluation of its rheological stability in various experimental conditions were carried out. The W/O (water-in-oil) emulsion fuel was made using n-decane, pure water, and Span 80 was used as a surfactant. Increments of water volume ratio and fuel temperature were the factors, which boosted the phase separation of the emulsion fuel. Rheological characteristics for different water/oil volume ratio, temperature, and elapsed time after the fuel production were examined. As the water volume ratio in the fuel increased, the behavior of non-Newtonian fluid was observed. Viscosity declined as the fuel temperature increased due to the cohesion of water droplets in the fuel. The effect of elapsed time on viscosity was not severe for lower water ratio. However, gradual decrease of viscosity 3 hours after fuel production, in the case of ratio of 3:7, was clearly observed.

산화제 배관과 연료탱크 사이의 공기층 단열에 의한 연료탱크 온도분포 예측

  • 권오성;하성업;조남경;조인현;나한비;길경섭;김병훈
    • Bulletin of the Korean Space Science Society
    • /
    • 2004.04a
    • /
    • pp.71-71
    • /
    • 2004
  • KSLV-I 추진기관 기체공급계는 상부의 산화제 탱크로부터 나온 산화제 주배관이 하부의 연료탱크를 관통하여 엔진공급계로 이어지도록 구성되어 있다. 연료탱크에는 산화제 배관의 관통을 위한 tunnel이 구성되어 있으며 배관과 tunnel은 일정한 간격을 유지하게 된다. 배관과 연료탱크 사이의 열전달을 줄이기 위하여 산화제 배관에 단열재를 적용할 수 있으나, 이 경우 배관의 운송, 조립시에 handling이 힘들게 되고, 특히 발사체에 조립된 후에 발생하는 단열재의 파손 및 성능감소에 대한 유지보수가 불가능하다. (중략)

  • PDF

대기오염 저감을 위한 차량연료의 최적연소 시스템 설계

  • Lee, Gwang-Hyeong;Min, So-Yeon
    • Proceedings of the KAIS Fall Conference
    • /
    • 2009.05a
    • /
    • pp.835-838
    • /
    • 2009
  • 본 논문은 환경공해의 주범인 자동차의 매연을 감소할 수 있는 방법에 대한 연구이다. 자동차 매연의 주요원인은 연료의 불완전 연소와 연료 자체의 특성때문이다. 따라서 본 논문에서는 가솔린/경유 차량을 CNG/LPG 차량으로 대체하고 CNG/LPG연료의 특성을 감안하여 연료의 공급과 분사량, 분사시간을 차량 ECU에서 보내지는 신호를 기본데이터로 차량의 가속과 감속 아이들 상태에서 차량을 적응적으로 최적화 할 수 있게 실시간으로 보정데이터를 계산한다. 본 논문의 결과로 기존의 구조변경차량의 출력에서 20%이상, 배기가스 에서 10% 이상의 향상되었다.

  • PDF

An Analytical Evaluation on the flue Gas and Combustion Efficiency of Emulsion Fuel (에멀죤 연료의 연소 배출가스특성 및 연소 효율에 관한 분석평가)

  • Park, Hyun-Mee;Eo, Yun-Woo;Baig, Seung-Woo;Park, Il Yong;Paeng, Ki Jung;Kim, Young-Man;Lee, Kang-Bong
    • Analytical Science and Technology
    • /
    • v.15 no.5
    • /
    • pp.427-432
    • /
    • 2002
  • The combustion behavior of heavy oil and its emulsion with water was evaluated. The concentration of $SO_x$ in the combustion gas of emulsion oil was reduced to 57% with respect to that of the combustion gas from neat heavy oil. Also, the concentration of $NO_x$ in the combustion gas of emulsion oil was reduced to 67% with respect to that of the combustion gas of neat heavy oil. These reductions of $SO_x$ in the combustion gas of emulsion oil seems to be due to the reaction with salts included in surfactant of emulsion oil. Also, the combustion efficiency of emulsion oil is evaluated to be about 6% higher than that of neat heavy oil.

Study on Lean-Premixed Combustion Characteristics of Dual-Stage Burner (이중 연료 분사구조를 갖는 희박-예혼합 버너의 연소특성 연구)

  • Jang, Jae Hwan;Cho, Ju Hyeong;Kim, Han Seok;Lee, Sang Min;Kim, Min Kuk;Ahn, Kook Young
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.37 no.1
    • /
    • pp.51-57
    • /
    • 2013
  • This study aims to experimentally investigate the combustion characteristics of a lean premixed swirl-stabilized burner with dual-stage fuel injection arrays. The results show that a variation in the fuel distribution to fuel stages 1 (upstream) and 2 (downstream) produces a noticeable change in the NOx and CO emissions. Reducing the confined ratio, defined as the ratio of the nozzle exit diameter to the liner diameter, may reduce NOx and CO emissions owing to reduced combustion loading and longer residence time, respectively. A nozzle exit velocity of 30 m/s shows the optimum characteristics in terms of NOx and CO emissions and flame stability: increasing or decreasing the nozzle exit velocity leads to a degradation in emissions or flame stability, respectively.

Study on Preliminary Design of Fuel Transfer Jet Pump Using SIMULINK (SIMULINK를 이용한 연료 이송용 제트펌프 기본 설계에 관한 연구)

  • Kong Chang-Duk;Park Jong-Ha;Han Dong-Joo
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.10 no.1
    • /
    • pp.38-43
    • /
    • 2006
  • In the present study, preliminary design and analysis for a jet pump, which is able to transfer fuel from the tank to the engine, were performed as an aerospace component technology development project. The jet pump is a core part, which is normally installed in the fuel tank, to supply the fuel from the tank to the engine feed pump, or to transfer the feed between tanks. In order to design preliminarily installed in the jet pump, equations for design were modelled using SIMULINK, and the design was carried out based on the simulation model.

Power Conversion System with One Inductor for Fuel Cell Battery Electric Vehicle (하나의 인덕터를 가지는 연료 전지 전기 자동차를 위한 연료전지·배터리 전력 변환 시스템)

  • Lee, Yun-Jae;Kim, Jae-kuk
    • Proceedings of the KIPE Conference
    • /
    • 2019.11a
    • /
    • pp.16-18
    • /
    • 2019
  • 본 논문에서는 연료 전지 전기 자동차에 맞는 새로운 전력 변환 시스템을 제안한다. 연료 전지 전기 자동차의 전력 변환 시스템은 배터리와 같이 구성하여 에너지 저장 불가능, 느린 응답 속도, 낮은 전력 밀도와 같은 연료 전지의 단점을 해결할 수 있다. 하지만 기존의 연료 전지 전기 자동차의 전력 변환 시스템은 두 개의 DC/DC 컨버터를 사용하여 연료 전지와 배터리를 함께 구성함으로써 두 개의 인덕터 개수로 인해 비용이 증가하고 전력 밀도가 낮다는 단점이 있다. 제안하는 전력 변환 시스템은 한 개의 인덕터, 추가적인 스위치와 다이오드를 사용하여 연료 전지와 배터리를 하나의 컨버터로 구성한다. 따라서 기존에 비해 인덕터 개수가 감소함으로써 경제적이고 높은 전력 밀도 달성할 수 있으며, 스위치의 on/off 동작에 따라 승, 강압 동작이 가능하기 때문에 더 많은 연료전지와 배터리의 전압 조건 상황에서 동작할 수 있다.

  • PDF

Fuel Cell and Battery Power Conversion System for Fuel Cell Electric Vehicle with One Inductor (하나의 인덕터를 가지는 연료 전지 전기 자동차를 위한 연료전지·배터리 전력 변환 시스템)

  • Lee, Yun-Jae;Kim, Jae-kuk
    • Proceedings of the KIPE Conference
    • /
    • 2019.07a
    • /
    • pp.65-67
    • /
    • 2019
  • 본 논문에서는 연료 전지 전기 자동차에 맞는 새로운 전력 변환 시스템을 제안한다. 연료 전지 전기 자동차의 전력 변환 시스템은 배터리와 같이 구성하여 에너지 저장 불가능, 느린 응답 속도, 낮은 전력 밀도와 같은 연료 전지의 단점을 해결할 수 있다. 하지만 기존의 연료 전지 전기 자동차의 전력 변환 시스템은 두 개의 DC/DC 컨버터를 사용하여 연료 전지와 배터리를 함께 구성함으로써 두 개의 인덕터 개수로 인해 비용이 증가하고 전력 밀도가 낮다는 단점이 있다. 제안하는 전력 변환 시스템은 한 개의 인덕터, 추가적인 스위치와 다이오드를 사용하여 연료 전지와 배터리를 하나의 컨버터로 구성한다. 따라서 기존에 비해 인덕터 개수가 감소함으로써 경제적이고 높은 전력 밀도 달성할 수 있으며, 스위치의 on/off 동작에 따라 승, 강압 동작이 가능하기 때문에 더 많은 연료전지와 배터리의 전압조건 상황에서 동작할 수 있다.

  • PDF

다공성물질을 이용한 초단열 왕복식 연소장치의 특성에 관한 실험적연구

  • 채재우;이강주;심민섭
    • Proceedings of the Korea Society for Energy Engineering kosee Conference
    • /
    • 1994.11a
    • /
    • pp.116-121
    • /
    • 1994
  • 에너지 자원의 고갈과 환경오염 문제가 심각히 대두되고 있는 현재 액체연료에 비하여 청정 에너지인 가스의 연료화에 대한 연구는 과거 어느때보다도 그 중요성이 높이 인식되고 있다. 이에 본 연구에서 제시하는 연소기는 다공성 물질을 이용하는 연소장치로서 연소 경로를 바꾸어줌으로써 공기를 예열하는 효과를 극대화시킴과 대류열및 복사열을 방출하는 것이 큰 특징이다. 본 연구의 결과에 의하면 당량비의 감소에 따른 화염온도는 이론단열화염온도보다 높게 나타나서 당량비의 감소에 비례하여 더욱 좋은 효과를 얻을수 있었으며, 또한 왕복주기시간의 감소함에 따라 화염온도는 약간씩 증가하는 경향을 보여주었다. 이것들은 초희박 연소의 가능성을 보여준 것으로 저발열량의 연료 의 연소로 인한 에너지 절약 또는 유기화합물 즉, 페놀류나 알데히드류와 같은 공해물질들을 제거하는 연소메카니즘에 기여한 할 것이다.

  • PDF

수소경제 국가비전 및 실행계획의 수립 연구

  • Bu, Gyeong-Jin
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2005.11a
    • /
    • pp.465-478
    • /
    • 2005
  • 수소경제는 이제 선택사항이 아니라 피할 수 없는 미래로 우리에게 다가오고 있다. 본 연구에서는 2040년을 수소경제 실현의 원년으로 삼고 2040년까지 최종에너지소비의 15%를 수소로 충당하는 공급목표를 설정하였다. 수소이용효율이 가장 높은 수송부문을 주요 대상으로 2040년까지 자동차의 50% 이상을 연료전지 자동차로 대체하고, 기타 가정상업 및 발전부문에서도 20-30%를 연료전지로 대체하는 계획을 세웠다. 이러한 수소경제가 계획대로 달성되는 경우, 우리나라는 2040년에 가서 에너지소비가 8%정도 줄고, 에너지믹스도 개선되어 화석에너지의 획기적 감소(석유의 경우 탄소경제 대비 23% 감소)와 신 재생에너지의 비약(탄소경제 대비 47% 증가)이 두드러진다. 이에 따라 온실가스의 대폭적 저감 (20%)과 에너지자급도의 대폭적 개선 (23%)이 기대된다. 수소경제의 달성을 위해서는 정부가 앞장서서 관련법의 제정과 전담기구의 신설 등 수소경제에 대비한 안정적 추진체제 및 관련 법제도의 정비를 서둘러야 할 것이다. 이와 함께 연료전지보급 및 수소공급 인프라 구축에 필요한 방대한 투자재원을 확보하기 위해서 민간부문의 투자를 촉진시키고 민간의 전문기술인력 양성과 더불어 연료전지 및 수소인프라 산업육성을 위한 규격 및 표준의 마련도 시급하다.

  • PDF