Journal of Advanced Marine Engineering and Technology
/
제36권5호
/
pp.603-608
/
2012
요즈음 환경오염 문제와 대체에너지 문제에 관심이 증대되고 있다. 디젤기관은 일반적으로 육상과 해상에서 동력을 생산하는데 사용되고 있는데, 디젤기관의 연소특성과 배기배출물 특성은 기관의 운전시간이 증가함에 따라 연료계통의 마모와 연소실 주위상태의 변화로 달라진다. 본 논문은 약 20여년 사용한 디젤기관에 바이오디젤혼합유를 사용할 경우, 연소특성과 배기배출물 특성에 미치는 연료분사시기의 영향을 고찰하기 위하여 실험적으로 연구하였다. 실험기관의 원래 연료분사시기는 BTDC $22^{\circ}$ CA이었는데, 20여년 운전한 후에 연료소비율과 배기배출물 특성에 대하여 실험적으로 최적의 연료분사시기를 분석한 결과, BTDC $26^{\circ}$ CA로 변경되었음을 알았다.
For carbon neutrality, direct-injection hydrogen engines are attracting attention as a future power source. It is essential to estimate the transient injection rate of hydrogen for the optimization of hydrogen injection in direct injection engines. However, conventional injection rate measurement techniques for liquid fuels based on the injection-induced fuel pressure change in a test section are difficult to be applied to gaseous fuels due to the compressibility of the gas and the sealing issue of the components. In this study, a momentum flux measurement technique is introduced to obtain the transient injection rate of gaseous fuels using a force sensor. The injection rate calculation models associated with the momentum flux measurement technique are presented first. Then, the volumetric injection rates are estimated based on the momentum flux data and the calculation models and compared with those measured by a volumetric flow rate meter. The results showed that the momentum flux measurement can detect the injection start and end timings and the transient and steady regimes of the fuel injection. However, the estimated volumetric injection rates showed a large difference from the measured injection rates. An alternative method is suggested that corrects the estimated injection rate results based on the measured mean volumetric flow rates.
Recently, many researches for the improvement of DI diesel engines have been performed to reduce the fuel consumption and exhaust emissions. Among the various factors effect on combustion and emission in Dl diesel engines, one of the most important factors is the characteristics of the fuel spray. Accordingly, the investigation on the characteristics of spray is needed to analyze the diesel combustion exactly, In this study, the measurement technique fur injection rate using the Zeuch method was developed. In addition, the effects of nozzle hole number on the spray and flame were investigated by visualization experiment.
Computational investigation was conducted to examine the performance of a high pressure common-rail fuel injection system which is used to power a passenger car direct injection (Dl) diesel engine. The pipe flows were modeled by one dimensional wave equation and solved by implicit FDM Each volume of injector was considered as chambers with orifice nozzle in connections. These simulation results were compared with the experimental data of Ganser Hydromag. The comparison of needle life and rate of injection between simulation data and experimental data showed quite a good agreement Different shape of injection rate can be made by adjusting the size of inlet orifice and exit orifice in the piston chamber The pilot injection was accomplished by adjusting command signal.
최근 자동차 제조사는 강화되는 배출가스 규제를 만족시키고 엔진 효율을 향상시키기 위해 다양한 기술을 연구하고 있다. 그 중 직접분사식 초희박 연소기술은 정밀한 연소제어를 통해 연소효율을 극대화 하고 연비를 향상시킬 수 있는 차세대 기술로 평가받고 있다. 기존 가스엔진에 초희박 직접분사기술을 적용하기 위해 기존의 MPI 엔진의 헤드를 재설계하였다. 기존 압축비10:1에서 12:1로 증가시킴으로써 이에 따른 압력선도, 열방출률, 연료소비율 등의 연소특성과 배출가스특성을 파악하였다. 압축비를 증가시킴에 따라 불안정한 연소상태로 인하여 연료소비율의 개선이 어려웠으나 탄화수소(THC)와 질소산화물(NOx)의 배출은 감소되었다.
액체추진제 로켓엔진에서 분사기의 미립화 및 혼합 특성과 그에 따른 연소 특성은 성능과 안정성을 결정하는 중요한 파라미터이며 분사기는 제한된 설계 조건하에서 최대의 열방출율을 발휘하도록 설계되어야 한다. 여기서 연소효율은 연료와 산화제의 혼합특성과 충돌 분무의 미립화의 정도에 의해 결정되므로 충돌 분무 유동성의 혼합, 미립화 특성과 이에 따른 인조성능 특성을 명확하게 밝힘으로써 최대 엔진성능을 위한 설계가 가능하게 된다. 분사기의 설계에는 분사요소형태, 분사공의 형상 및 유동시스템 등이 포함되며 특히 분사요소 형태의 선택에는 추진제, 연소실냉각방법, 연소실 형상, 자동조건 및 엔진의 수명 등이 중요한 제한조건으로 고려된다. 이런 형태의 분사 요소들 중, 충돌형 분사기는 저장성 추진제를 사용하는 중, 저추력의 액체추진제 로켓엔진에 주로 사용된다. 이 분사형태는 미립화 성능이 높지 않고, 분사공 직경 및 운동량비에 따른 혼합성능이 만감하며 blow apart 등에 의한 열부하 혹은 안정성에 대한 문제가 있으나 양호한 혼합효율, 신뢰성과 제작의 용이함으로 인하여 광범위하게 사용된다.
Journal of Advanced Marine Engineering and Technology
/
제39권4호
/
pp.418-424
/
2015
국제해사기구 해양환경보호위원회는 2016년 1월 1일부터 배출통제지역을 통항하는 선박에 대해서 Tier III를 적용하여 질소산화물 배출 규제를 더욱 강화하기로 결정하였다. 본 논문에서는 질소산화물 배출 저감을 위한 연구의 일환으로 한국해양대학교 실습선 한바다호를 이용하여 실제 운항 중에 주기관을 단일분사와 이단지연분사의 두 가지 조건으로 운전하여 부하별 배기가스, 실린더 압력, 연료소모량 등을 계측하였다. 그 결과 두 가지 운전조건 모두 엔진의 부하가 증가할수록 질소산화물과 이산화탄소 배출량도 함께 증가하는 경향을 보였으며, 일산화탄소의 농도는 감소하였다. 또한 이단지연분사 시에는 최대폭발압력이 약 10% 이상 감소하였고, 이로 인해 배기가스 내 질소산화물의 농도는 약 25~30% 정도 감소하였다. 하지만 질소산화물 배출 저감의 긍정적인 결과에 반하여 연료소비율이 약 3~5% 정도 증가하는 상반관계가 확인되었다.
Bosch법과 Zeuch법의 분사율 측정기를 직접설계, 제작하여 분사율 측정실험을 행한 결과 다음과 같은 결론을 얻었다. 1. Bosch법 분사율 측정기는 분사량의 참 값에 대한 측정오차가 약 $\pm$1%로 정밀도와 신뢰성이 높았다. 2. Bosch법 분사율 측정기에서, 분사율은 연료펌프의 회전수와 부하가 증가할수록 높아지는 반면, 분사기간(ms)은 회전수가 증가할수록 짧아짐을 알 수 있었다. 3. 본 실험에서는, 동일조건하의 단발분사가 연발분사에 비해 전체적으로 분사율이 낮고 기관의 1 cycle당 분사량도 약 30% 정도 적었다. 4. Zeuch법 분사율 측정기로 구한 체적강성계수의 값은 배압이 증가할수록 증가함을 알 수 있었다. 5. Zeuch법 분사율 측정기는 Bosch법 분사율 측정기에 비해 정밀도가 낮았다.
배출가스 규제강화에 대응하기 위해 전자제어 디젤엔진의 적용으로 연료 분사량과 연료 분사시기를 정밀하게 제어하여 연료소비율과 출력 향상 및 소음과 진동이 감소되었다. 전자제어 디젤엔진 시스템의 성능을 유지하기 위해서는 연료압력을 정밀하게 제어하는 중요한 부품이 연료압력 레귤레이터이며 제어불량이 발생할 경우 연료압력이 정밀하게 제어되지 않아 시동불량, 시동지연, 가속불량, 엔진부조 등 이상 현상이 초래된다. 본 실험에서는 연료압력 레귤레이터의 고장에 따른 성능변화를 고찰하기 위하여 연료압력 레귤레이터 제어율에 변화를 주어 연료압력, 회수된 연료유량과 엔진회전수에 미치는 영향을 실험적으로 고찰하였다. 실험결과, 연료압력 레귤레이터의 제어율이 기준에서 4-6% 정도 낮아지면 엔진회전수, 회수되는 연료유량의 변화가 크게 나타났으며 이 때 이상현상이 발생함을 확인하였다. 또한 이를 통하여 연료압력 레귤레이터의 고장 유무을 판단할 수 있다.
The purposes of this study were to evaluate engine performance and to analyze smoke emission characteristics for varied injection pressures and engine operating conditions of an electronically-controlled ultra high pressure fuel injection system(UHPFIS). It was discovered that the engine performance with the present UHPFIS was far better than what was initially expected. And the UHPFIS permitted engine operation at air/fuel ratios richer than 20 : 1 without increasing smoke emissions. It was discovered that the indicated mean effective pressure was increased, while the specific fuel consumption and the amount of soot were decreased, as the fuel rail pressures were improved atomization of the fuel spray. As the intake air temperature was increased from $38\sim205^{\circ}C$ in 38 degree increments, the indicated mean effective pressure was dropped while the specific fuel consumption was increased.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.