• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.175-178
• /
• 2008

Spray characteristics for the simplex atomizer are investigated. The atomizer was tested with kerosene which is generally used as a fuel for gas turbine engines. But it is very difficult and dangerous to measure spray performance. So water is used as a working fluid for measuring the droplet information. In this study, spray visualization was performed by using ND-Yag Laser and droplet size was measured by using PDPA system by using two different working fluid such as water and test fluid # 2 which has similar characteristics of the kerosene. The test results show that SMD of water bigger than test fluid # 2 about 5$\sim$15 mm because surface tension of water is higher by a factor of 3. But the spray angles and the spray shapes have similarity

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.160-165
• /
• 2009

연료전지 분리판은 연료전지 스택을 구성하는 부품 중에서 가장 많은 수량이 사용되는 부품의 하나로서 연료전지의 출력밀도(Power Density, W/L), 비출력(Specific Power, W/kg) 및 가격($/kWe) 관점에서 가능한 저가의 소재 및 제조공정으로 경량, 박형화가 이루어져야 하는 핵심 부품이다. 이러한 저가의 경량, 박형화 분리판 개발의 전제조건은 연료전지 스택에서 요구하는 다양한 물성, 장기수명 및 신뢰성은 나타내는 내구성을 만족해야 하는 것이다. 이렇듯 연료전지 분리판은 다음과 같은 요구 조건을 만족해야 한다. 높은 전기전도도, 전기화학적 부식 저항성, 화학적 안전성, 가스 기밀성, 기계적 강도 및 가공성 등이라 하겠다. 본 연구에서는 분리판의 요구 조건을 만족할 수 있는 분리판을 제작하기 위하여 고분자 복합소재(PCB; Printed Circuit Board)를 이용하여 전기도금을 통해 Cu/Au(1st PCB 분리판)과 Cu/Ni/Au(2st PCB 분리판)을 코팅하여 분리판을 제작하였다. 제조된 분리판을 이용하여, 접촉저항, 부식특성, 가스 기밀성, 기계적 강도를 분석하였으며, 단위전지를 제작 하여 상용 Graphite 분리판과 성능을 비교분석하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.212-215
• /
• 2007

고분자전해질연료전지 시스템이 영하 조건에 노출될 경우, 셀의 성능 및 내구성에 미치는 영향을 실험적으로 확인해 보았다. -30 $^{\circ}C{\sim}70$ $^{\circ}C$ 조건을 반복 경험시키며, 성능저하 정도를 살펴보았다. 일반적인 운전조건과 동결/해동에 의한 성능저하 요인을 분리하여 확인하기 위해, 30 $^{\circ}C{\sim}70$ $^{\circ}C$ 범위의 사이클을 진행한 경우에 대해, 위와 통일한 분석을 통하여 성능 및 각종 물성 값의 변화를 비교하였다. 동결조건에서 셀의 성능저하는 형성된 얼음의 물리적 부피팽창으로 인한 계면저항의 증가가 주요 원인임을 밝힐 수 있었다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.2
• /
• pp.42-49
• /
• 1997

This experimental study was performed to find fuel property variations of the ultrasonic energy adding gasoline and improve the spray characteristics of the multipoint injector for EFI engine. The cause and effect of the characteristic improvement of the ultrasonic energy adding fuel was found out by the chemical structure analysis (NMR, IR), distillation and viscosity test. The results are obtained that the chemical property of gasoline organizition was changed aromatics to paraffins and branch index as the physical characteristics of gasoline were improved by ultrasonic energy. There were higher distillation and lower viscosity in ultrasonic energy adding gasoline.

• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.915-921
• /
• 2008

In most PEM fuel cell research, effects of cell geometry, physical properties of component such as membrane, carbon cloth, catalyst, etc. and water transport phenomena are key issues. The scope of these research was limited to single cell and stack except BOP(Balance of plant) of fuel cell. The research fouced on the fuel cell system usually neglect to consider detailed transport phenomena in the cell. The research of the fuel cell system was interested in a system performance and system dynamics. In this paper, the effect of the anode recirculation is calculated using the 2D steady-state model. For this work, 2D steady-state modeling and experiments are performed. For convenience of modifying of model equation, not commercial pakage but the in-house algorithm was used in simulation. For an vehicle industry, the analysis of the anode recirculation system helps the optimization of operating condition of the fuel cell.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 1999.03a
• /
• pp.59-64
• /
• 1999

지하암반은 계절적 대기온도 변화의 영향을 거의 받지 않는 온도조건 및 뛰어난 단열성으로 인해 물류의 저온냉동저장이나 액화연료의 저장 등을 위한 좋은 대상으로 인식되고 있다. 이러한 분야에 있어서 암반의 열물성 및 열유동 특성은 매우 중요한 요소로서, 이는 장기적인 에너지절약 및 지하구조물의 열역학적 안정성의 정확한 평가와 직접적 연관이 된다. (중략)

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.107-107
• /
• 2012

연료전지 분리판용 모재로서 사용되고 있는 스테인레스 스틸에 대해서는 많은 연구가 진행되어 왔으나, 알루미늄은 거의 연구가 진행되지 않고 있다. 따라서 이번 연구는 DC 반응성 마그네트론 스퍼터링법으로 알루미늄 기판 위에 TiN, TiCN 박막을 반응성 가스 유량별로 증착하여, 기계적 특성 및 내부식성 특성을 비교 검토하였다.

• Elastomers and Composites
• /
• v.42 no.4
• /
• pp.232-237
• /
• 2007

We examined the properties of compound and made compound of the optimum state using the properties of each material to evaluate suitability of FKM, VMQ, EPDM, NBR with gasket for fuel cell which is in general use with the material of gasket. It could be found from the compound made with setting the optimum state that NBR is worse than FKM in the chemical property of matter for a long term, and VMQ is worse than FKM in the elution of a metal ion, and EPDM is worse than FKM in the permeability of gas. As a result of leak evaluation of gasket for fuel cell with using FKM, it appeared leak in short time when contracting pressure is getting lower and sealing pressure is getting higher. And as a result of the life prediction with using Arrhenius model, we could predict that it is possible to continuously drive for 60,000 hours.

• Journal of ILASS-Korea
• /
• v.15 no.2
• /
• pp.94-99
• /
• 2010

The object of this investigation is to study the thermal properties and spray characteristics of kerosene fuel in high temperature and pressure conditions. In order to investigate the thermal properties and spray characteristics, KIVA3 and SUPERTRAPP have been used at the same time. The thermal properties of kerosene has been calculated in high temperature and pressure condition using SUPERTRAPP. The study of spray characteristics has been conducted at both original properties of KIVA3 and calculated properties. The evaporation rate was increased in proportion to pressure when the calculated properties were used. However, the effect of pressure was not shown in the case of using original properties. So the calculated properties are more effective than original properties in high temperature and high pressure condition.

• Fire Science and Engineering
• /
• v.31 no.3
• /
• pp.41-48
• /
• 2017

In order to investigate the influence of changes in the thermal properties of solid combustibles on thermal decomposition, a series of solid pyrolysis experiments were performed using a cone calorimeter specified in KS F ISO 5660-1. In the present study, Poly Methyl Methacrylate (PMMA) which does not produce Char during pyrolysis process was used as solid fuel. Results obtained from cone calorimeter experiments were compared to ones obtained from numerical analysis of Fire Dynamics Simulator (FDS) 1D pyrolysis model adopted with thermal properties of solid fuel as input parameters. Comparisons between experimentally calculated and model-predicted mass loss rate were then made to elucidate the effect of changes in the thermal properties on pyrolysis of PMMA.