• Title/Summary/Keyword: 연동신호

Search Result 383, Processing Time 0.027 seconds

Present Condition and View of Electronic Interlocking System for Signaling System Implementation on Train (신호설비구현을 위한 전자연동장치의 현황과 전망)

  • Lee, Jung-Geun;Lee, Hyang-Beom
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 2007.08a
    • /
    • pp.361-365
    • /
    • 2007
  • 전자연동장치(Interlocking System)는 열차의 안전운행 확보와 함께 수송능력과 보호향상, 정확하고 신속한 운송과 더불어 이용률을 증대하는데 중요한 역할을 한다. 철도 신호보안 설비 중에서 그 핵심을 이루는 연동장치 설비에 첨단기술인 전자, 정보처리 및 정보전송기술을 철도 신호 시스템에 도입하여 신뢰성과 안정성이 확보된 신호설비를 구현하기 위해 최근에는 마이크로프로세서를 이용한 전자연동장치 기술이 개발되었다. 본 논문에서는 전자연동장치의 필요성 및 기존설비(기계 및 계전 연동장치)의 노후화에 따른 장애 및 호환성 결여 등의 문제점들을 해결하기 위하여 전자 연동장치와 기존 계전 연동장치의 차이점을 제시 및 문제 해결방안을 고찰하고, 전자연동장치 동향을 살펴보았다.

  • PDF

Development of Travel Time Model at the Signal Coordinated Links Using Traffic Flow Model (교통류 모형을 이용한 도시 연동가로의 통행시간 모형개발)

  • 박용진
    • Journal of Korean Society of Transportation
    • /
    • v.16 no.2
    • /
    • pp.145-155
    • /
    • 1998
  • 대도시 가로망의 대부분은 신호교차로와 신호교차로가 연결되는 가로(link)로 구성되어 있어 가로의 통행시간은 가로의 주변여건, 차량간의 상호작용 및 교통신호등과 같은 요소에 영향을 받게된다. 따라서 본 연구의 목적은 대도시 가로망에서 신호 연동체계로 운영되는 가로의 통행시간을 예측할 수 있는 모형을 개발하는데 있다. 본 연구는 대구광역시 가로망을 대상으로 연동가로의 교통흐름을 가장 잘 나타내는 Greenberg모형을 이용하여 연동가로의 통행시간 모형을 도출하였다. 도출된 연동가로의 통행시간 모형은 임계통행시간$(t_m$)과 교통량 대가로최대교통량비$(q/q_m)$의 함수로 이루어졌다. $t_m$모형은 안정류상태의 통행시간 및 불안정류상태의 통행시간의 비를 이용하여 개발하였고 가로 용량모형은 상류부와 하류부의 신호조건에 따른 변수와 가로길이를 변수로 하는 모형을 개발하였다. 개발된 모형은 대구광역시를 대상으로 조사한 12개의 연동가로의 자료를 적용하여 연동으로 운영되는 가로의 통행시간 모형을 도출하였다. 도출된 통행시간 모형은 도로용량에 제시한 모형에 비하여 간단하게 가로의 통행시간을 추정할 수 있으며 교통계획에 적용되는 통행시간모형 비하여 가로의 신호 및 운영조건을 포함한 세부적인 통행시간 모형이다.

  • PDF

A Method for Efficient Signaling Interworking between PSTN/IP Networks (PSTN-IP Networks의 효율적 신호 연동 방안)

  • 고남영;이재완;황민호;서석철
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2001.10a
    • /
    • pp.93-96
    • /
    • 2001
  • For interconnecting PSTN and IP Networks, We made a comparative analysis of signaling interworking and also studied SS7 Signaling process as a method for signaling interworking for using the establishment of PATN/IP network and seting up a phone call. As a methode of signalning interworking for linking an intelligent net-service between PSTN/IP Networks, we made researches of the merits and demerits about the access of INAP/SS7 using PSTN SCP and the call-routing of intelligent net-service using PSTM SSP in an IP network. We made a study of the protocol stack in IETF SIGTRAN as the realization for this

  • PDF

Developing and Evaluation of Coordinated Semi-Actuated Signal Control for Field Application (현장적용을 위한 연동형 반감응 신호제어 개발 및 분석)

  • Park, Soon-Yong;Lee, Suk-Ki;Jeong, Jun-Hwa
    • The Journal of the Korea Contents Association
    • /
    • v.14 no.3
    • /
    • pp.451-462
    • /
    • 2014
  • In this paper, Coordinated Semi-Actuated Signal Control algorithm was developed and evaluated. According to the analysis of simulation, the coordinated semi-actuated signal control led to reduced vehicle delay as the difference of traffic volume between major and minor streets was getting bigger. But when there was relatively high traffic volume, or the equivalent amount of traffic volume on major and minor streets, optimized pre-timed signal control was verified to lower delay times compared to coordinated semi-actuated signal control; however, it might increase pedestrian delay. Therefore, the coordinated semi-actuated signal control should be implemented at intersections where traffic volume is relatively low.

The Improvement of Signal Timing Model with Mixed Integer Linear Programming for Coordinated Arterials (혼합정수선형계획법을 응용한 간선도로 신호연동화모형 개선에 관한 연구)

  • 신언교;김영찬
    • Journal of Korean Society of Transportation
    • /
    • v.15 no.3
    • /
    • pp.53-74
    • /
    • 1997
  • 신호연동화모형에서 통과폭모형은 지체를 최소화하지 못하고 지체도모형은 좌회전현시순서를 최적화하지 못한다. 이러한 모형의 단점을 극복하고자 개발된 KS_SIGNAL은 지체를 최소화하는 신호연동화모형이지만 지체를 산정하는데 있어 많은 한계를 갖고 있다. 본 연구에서는 기존에 개발된 KS_SIGNAL의 지체모형을 개선하여 보다 우수한 연동신호시간과 현시순서를 산정해주는 신호최적화모형(KS_SIGNAL II)을 개발하여 FORTRAN 언어로 전산화하였다. 개발된 모형은 다양한 평가를 통하여 기존 모형들보다 전반적으로 우수한 것으로 입증되었다. 본 모형을 통하여 차량 출발 및 도착형태에 따른 대기차량 소거시간을 고려하는 옵셋 산정이 가능해져 지체를 최소화하는 간선도로의 신호최적화모형으로 활용될 경우 도로기능제고 및 지체도 감소에 의한 편익을 얻을 수 있다.

  • PDF

Increase of Intersection Approach Delay By Mid-Block Crosswalk Signal (단일로 횡단신호의 교차로 접근지체에 대한 영향 분석)

  • 김정현
    • Proceedings of the Korea Society for Simulation Conference
    • /
    • 1999.10a
    • /
    • pp.87-92
    • /
    • 1999
  • 교차로 접근지체의 산정은 간선도로의 서비스수준 평가에 있어서 가장 중요한 요소 중의 하나이다. 교차로 접근지체는 상류부 교차로에서 진입하는 교통에 대한 균일지체와 그 이외 단일로 상에 존재하는 세가로등에서 유입되는 교통에 대한 무작위지체, 1회의 신호주기에 교차로를 통과하지 못한 교통에 대한 잔여지체 등과 연동보정계수를 이용하여 산정된다. 우리나라를 비롯한 대부분의 나라에서는 미국에서 차량의 지체와 연동보정계수를 이용하여 개발된 교차로 접근지체 산정식의 구조를 그대로 수용하고 있다. 그러나 도심부 신호교차로 사이의 단일로에 보행자를 위한 횡단신호가 설치되어 있는 경우, 이러한 단일로 횡단신호가 하류부 교차로의 접근지체에 미치는 영향이 있을 것으로 판단한다. 따라서 미국과는 달리 신호교차로간의 간격이 크고, 단일로 상에 보행자용 횡단시호 설치가 빈번한 우리나라의 실정에서는 이에 대한 영향을 분석하여 교차로 접근지체 산정 시 이를 반영하는 것이 바람직하다. 본 연구에서는 단일로 횡단신호가 하류부 신호교차로에서의 접근지체에 미치는 영향을 분석하기 위하여, 상류부 교차로와 단일로 중간부 횡단보도와의 거리, v/c 비, 신호 offset 등 상황을 설정하여 TRANSYT-7F를 이용하여 시뮬레이션을 수행하였다. 본 연구에 의하면 단이로 중간의 횡단신호가 상류부 교차로의 신호와 연동되지 않는 경우에는 하류부 교차로의 접근지체에 미치는 영향이 거의 없는 것으로 나타났으며, 연동 시에는 상류부 교차로와의 거리, v/c 비, 신호 offset 등에 따라 최고 80% 이상 까지 접근지체가 증가하였다. 일반적으로 신호 offset이 40%에서 60% 사이로 연동상태가 불량할수록 하류부 교차로에서의 접근지체가 증가하는 것으로 나타났으며, 그 외에 변수에 대하여서도 신호 offset에 따라 다른 정도로 접근지체에 영향을 미치는 것으로 나타났다. 따라서 현재 우리나라의 신도시 개발 시 일반적으로 나타나는 대규모 구획(super block)과 이로 인하여 불가피한 단일로 중간부의 횡단신호의 설치는 교통운영 측면에서 재고되어야 할 것으로 판단된다.

  • PDF

Development of a Cycle-free Based, Cooridinated Dynamic Signal Timing Model for Minimizing Delay (Using Genetic Algorithm) (지체도 최소화를 위한 주기변동기반 동적신호시간 결정모헝 개발)

  • 이영인;최완석;임재승
    • Journal of Korean Society of Transportation
    • /
    • v.19 no.1
    • /
    • pp.115-129
    • /
    • 2001
  • The purpose of this study is to develop a cycle-free signal timing model for minimizing delays based on Third-generation control concept using Genetic Algorithm. A special feature of this model is its ability to manage delays of turning movements on the cycle basis. The model produces a cycle-free based signal timing(cycles and green times) for each intersection to minimize delays of turning movements on the cycle basis. The performance of cycle-free signal timings was evaluated on normal (v/c = 0.7) and oversaturated (v/c=1.0) conditions. The performance measures are throughput and the number of queued vehicles at the end of green time. The result shows that the cycle free signal timing is superior to the fixed signal timing to manage traffic flows of intersections; (1) the proposed model accomplishes the basic objective of the research, producing cycle free signal timings on the cycle basis, (2) on normal conditions, cycle free signal timings produce less queued vehicles at the end of green time, and (3) on oversaturated conditions, the cycle free signal timing is superior to the fixed signal timing to manage saturated traffic flows of intersections.

  • PDF

Dynamic Control of Coordinated Traffic Signals for Minimizing Queue-lengths (대기 차량 최소화를 위한 동적 교통 신호연동 모델)

  • 윤경섭
    • Proceedings of the KOR-KST Conference
    • /
    • 1998.10a
    • /
    • pp.196-205
    • /
    • 1998
  • 교통신호에서 주로 고려되는 변수는 신호주기(cycle length), 녹색시간(green split), 옵셋(offset)그리고 좌회전 현시순서(left-turn phase sequence)로 구성된다. 기존의 대부분의 연동 모델들은 고정된 주기하에서 평균적인 유입 교통량을 측정한 후, 선형최적화 이론을 적용하여 최적 신호를 산출한다. 그러나 이 방법은 어디까지나 평균적인 데이터에 대해서 계산을 한 것이기 때문에 실시간 최적화를 제공하기가 어렵다. 본 연구에서는 평균 차량 통행량 대신 실시간으로 입력되는 차량 대기행렬, 차량 도착률을 기초로 대기차량을 최소화하는 동적 신호시간 산출 모델을 개발하였다. 본 모델에서는 Peytechew가 제안한 각 진입로에서의 대기 차량 예측 모델을 기초로 하여 다음 주기에서의 차량 대기 행렬을 예측한 후, 선형 최적화 이론을 적용하여 신호시간을 산출한다. 본 모델에서 산출된 신호주기와 녹색시간은 대기차량길이를 최소화하는 신호 시간으로서 교차로간의 연동효과를 고려하여 실시산 교통상황에 따라 주기별로 변화한다. 본 모델은 3개의 교차로로 구성된 네트워크를 대상으로 적용하였다. 실험 네트워크의 주도로 교통량은 부도로의 교통량 보다 많다고 가정하였으며 각 링크사이에서의 차량 진출입은 없다고 보았다.

  • PDF

Development of Interlocking Signal Simulator for Verification of Naval Warship Engineering Control Logics (함정 통합기관제어체계의 제어로직 검증을 위한 연동신호 시뮬레이터 개발)

  • Lee, Hunseok;Son, Nayoung;Shim, Jaesoon;Oh, Jin-Seok
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.25 no.8
    • /
    • pp.1103-1109
    • /
    • 2021
  • ECS is a control device so that the warship can perform the mission stably by controlling and monitoring the entire propulsion system. As the recent provisions of the warship, it's propelling system is complicated than past, as the demand performance and mission of the warships are diverse. In accordance with the complicated propulsion system configuration, the demand for automatic control function of the ECS is increasing for convenient and stable propulsion system control for convenient and stable. As a result, verification of ECS stability and reliability is required. In this paper, we develop an interlocking signal simulator for verifying ECS control logic and communication protocol for warship with CODLOG propulsion systems. The simulator developed was implemented to simulate a signal of gas turbine, propulsion motors, diesel generator and 11 kinds of auxiliary equipment. The reliability of ECS was verified through the ECS communication program and the I/O signal static test with the simulator.

고리2호기 주급수차단밸브 구동용 질소 고압연동신호 제거

  • 윤덕주
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1997.10a
    • /
    • pp.392-397
    • /
    • 1997
  • 고리 2호기 주급수 차단밸브의 경우 다른 호기와는 달리 구동용 질소압력 측정스위치에 의한 닫힘 연동신호가 설치되어 있다. 이러한 연동신호는 벨브 구동용 반구내 질소 압력 스위치 "고" 오동작에 의한 밸브차단 가능성이 있으며 이 경우 질소압력스위치가 저/고 경보창에 COMMON되어 있어 원인 규명에 어려움이 있다. 또한 질소압력 스위치 고장 및 질소가스 누설시 작업수행이 어렵고 위험이 따른다. 이러한 70년대 발전소 설계의 과잉설비를 제거하므로서 최적운전과 경제성 향상에 기여할 수 있으며 아울러 유지정비의 용이성과 밸브 불시닫힘을 미연에 예방할 수 있으리라 예상된다. 이와 관련하여 발전소 계통안전성, 기기안전성을 평가한 결과 기존의 안전해석결과가 유효하며 또한 FSAR 수정없이 이러한 설비변경이 가능하다는 결론에 도달하였다.결론에 도달하였다.

  • PDF