• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.8 no.3
• /
• pp.80-87
• /
• 1994

인버터 승강기의 전원설비, 즉 간선굵기와 변압기 용량의 설계 기준을 정립하기 위하여, 국내 승강기업체에서 고층 아파트와 빌딩에 설치한 인버터 승강기를 대상으로 전원설비 용량산정이 기준이 되는 가속전류와 전부하상승전류를 측정하고 분석하였다. 그 결과, 가속전류는 각 업체에서 제시하는 값에 비해 작아졌으나 전부하상전류는 국내 승강기 업체의 기술수준의 미흡으로 인해 크게 나타났다. 이에 따라, 전선의 길이가 100m이상인 경우에는 허용전압강하에 의한 계산이 유효하게 되어 전선의 단면적을 한단계 줄일 수 있고, 변압기 용량은 각 사의 제시값에 비해 속도 60m/min의 경우에는 1∼4[kVA]정도, 90m/min인 경우에는 3∼5[kVA]정도 커지게 된다.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2585-2587
• /
• 2003

한전에서는 전력설비의 효율적인 관리를 위하여 일찌기 배전분야에 GIS를 도입하여 신배전정보시스템(NDIS : New Distribution Information System)을 구축, 시범운영을 마치고 전국에 단계적으로 확대운영하고 있다. GIS를 업무에 활용하기 위해서는 설비도면의 입력이 선행되어야 하나 이를 수작업에 의존할 경우 많은 비용과 시간이 소요될 뿐만 아니라 입력자의 숙련정도에 따라 자료의 정확도가 달라지게 되므로, 이러한 문제점들을 근본적으로 해결하고자 설비의 위치, 심볼, 계통연결, 속성자료 등을 컴퓨터로 자동인식 입력시켜 수작업을 최소화하는 기법 및 적용연구가 필요하며, 특히 국가기본도를 Base Map으로 사용함에 따른 상대오차 보정문제도 해결되어야 한다. 본 개발은 변전소에서 전력수용가까지의 전력공급설비를 나타내는 배전설비도면에서 도면내 주요 설비인 전주와 전선을 인식하는 방법 즉, 반투명 필름에 손으로 그려진 배전설비도면의 스캐닝 영상을 인식기법을 적용하여 설비내용, 설치위치, 전선종류별 설치상태 등 지리정보시스템에서 사용될 정보를 Digital 형태의 Data로 자동생성하고 국가기본도와의 상대오차보정까지 처리하는 것을 주요내용으로 하고 있다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.629-630
• /
• 2005

ACSR(Aluminum Conductor Steel Reinforced)가공송전선은 교류전류의 흐름에 의하여 코어 (Core)부에 자기장이 발생되어 전력손실을 발생시킨다. 이로 인한 전력손실을 최소화 하는 방법으로는 코어의 재질을 자성체인 고탄소강선 대신에 비자성강으로 교체하는 방법이 있다. 본 연구에서는 기존의 고탄소강선 대신에 고강도 비자성강을 코어(Core)에 적용한 ACNR(Aluminum Conductor Nonmagnetic Steel Reinforced) 가공송전선을 개발하였다. ACNR 가공송전선의 전기적 특성시험에서 약 9%정도의 손실저감효과를 나타내었다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.313.1-313
• /
• 2002

A high pressure hose having tuning cables, called Resonator hose' is frequently used to attenuate pressure ripple generated by the pump fur reducing the vehicle interior noise. A number of studies have been conducted on the resonator hose and its analytical models. However, there are few studies which deal with the influence of resonator hose on vehicle interior noise because the most of studies focused on transmission loss of the resonator hose. (omitted)

• Progress in Superconductivity and Cryogenics
• /
• v.10 no.1
• /
• pp.28-31
• /
• 2008

22.9kV 50MVA HTS power cable has been developed and tested by Korea Electrotechnology Research Institute and LS Cable Company and it was supported by a grant from Center for Applied Superconductivity Technology of the 21st Century Frontier R&D Program. In this paper, DC Ic of 100m HTS cable which is installed at Kochang testing station was measured and analyzed. A measurement technique of DC Ic used by resistance and inductance removal method is established.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.4
• /
• pp.697-702
• /
• 1989

This study deals with the heat cycle characteristics of sleeve connector of aluminum stranded conductors steel reinforced(ACSR). In order to investigate the effect of heat cycle on the sleeve connector of stranded conductor, experimental study has been performed for both the temperature rising and electrical resistance of sleeve connector. Also, the effect of changes in surrounding temperature on the allowable current of sleeve connector was studied in order to investigate the influence on the connector size of conductor. Under the given test conditions of heat cycle, the temperature rising s decreased with the increase of sleeve size of conductor. The deviation of resistance of sleeve connector in conductor decreased with the increase in the size of sleeve connector.

• Korean Journal of Environment and Ecology
• /
• v.27 no.2
• /
• pp.253-265
• /
• 2013

This study was correlation analysis between provision and management of street green and street environment through field survey about city official roads(93 routes, 629.2km) in Seoul. Green belt under the street trees were 17.5% of all routes. Composition of street green belt width of 1~ 2m was the most common(11.6%). Management status as a protected facilities were protect frame and prtect cover installed inerval(60.1%). Interval of pruning was 63.5%. Type of tree was mainly 47.9%. Road width was mainly more than 8-line(51.3%). Sidewalk width was mainly 3~6m(84.1%)in environment status of street. Landuse was mainly commercial and business(70.3%). Electronic wire complete was mainly compete with crown(33.6%). Use of sidewalk was mainly used(16.3%). ANOVA analysis was conducted between the Street green and environment of Street. Street green belt(more than with 3m) was analyzed to be effective in street green manufacture. Natural green area of city's outside and Industrial area were analyzed to be effective. Use of sidewalk was to be a management. Protection facilities are installed on the narrow sidewalk width lower intensity. There was a higher strength in narrow sidewalk width, road width and compete with crown. And type of tree was higher strength similarly. Pruning and type of tree showd a significant correlation. Thus, ensure sufficient sidewalk width and land use should be considered for street green was effective manufacture and management. Species selection and pruning management was needed by consider electronic wire management, type of tree and landscape.

• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.5
• /
• pp.375-387
• /
• 2023

The subsea power cables are increasingly important for harvesting renewable energies as we develop offshore wind farms located at a long distance from shore. Particularly, the continuous flexural motion of inter-array dynamic power cable of floating offshore wind turbine causes tremendous fatigue damages on the cable. As the subsea power cable consists of the helical structures with various components unlike a mooring line and a steel pipe riser, the fatigue analysis of the cables should be performed using special procedures that consider stick/slip phenomenon. This phenomenon occurs between inner helically wound components when they are tensioned or compressed by environmental loads and the floater motions. In particular, Vortex-induced vibration (VIV) can be generated by currents and have significant impacts on the fatigue life of the cable. In this study, the procedure for VIV fatigue analysis of the dynamic power cable has been established. Additionally, the respective roles of programs employed and required inputs and outputs are explained in detail. Demonstrations of case studies are provided under severely sheared currents to investigate the influences on amplitude variations of dynamic power cables caused by the excitation of high mode numbers. Finally, sensitivity studies have been performed to compare dynamic cable design parameters, specifically, structural damping ratio, higher order harmonics, and lift coefficients tables. In the future, one of the fundamental assumptions to assess the VIV response will be examined in detail, namely a narrow-banded Gaussian process derived from the VIV amplitudes. Although this approach is consistent with current industry standards, the level of consistency and the potential errors between the Gaussian process and the fatigue damage generated from deterministic time-domain results are to be confirmed to verify VIV fatigue analysis procedure for slender marine structures.

• Electric Engineers Magazine
• /
• v.264 no.8
• /
• pp.28-34
• /
• 2004

현재 국가간의 IEC를 통하여 국제적인 표준화를 진행 중에 있으나 이러한 국가간의 표준화가 완료되기 이전이나 혹은 타국과 다른 특성의 제품을 제조 생산하는 경우에는 이와 관련된 자국의 기술 범위에서 언급을 하고 있는데 국내에서도 잘 알려진 NEMA VE 1-2002/CSA C22.2 NO.126.1-02와 국내의 연구학문도 소개하여 전기계의 기술인들에게 참고 자료가 될 수 있도록 관련 기준 위주로 정리하였다.<중략>

• 건강소식
• /
• v.34 no.12
• /
• pp.34-35
• /
• 2010

매서운 칼바람이 부는 겨울은 날씨가 추워지는 만큼 건강관리에도 신경을 써야 하는 계절이다. 특히 심근경색은 더더욱 그러하다. 최근 런던열 의과대학 크리시난 바스카란교수의 연구결과에 의하면 기온 1도가 떨어지면 1개월간 심근경색이 발생할 위험이 2% 증가하는 것으로 나타났다. 본격적인 겨울에 들어서는 12월, 심근경색 전선에 이상 징후는 없는지 체크리스트를 통해 점검해보자.