• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.18 no.3
• /
• pp.1-6
• /
• 2022

Ground source heat pump (GSHP) system is highly efficient and environment-friendly and supplies heating, cooling and hot water to buildings. For an optimal design of the GSHP system, the ground thermal properties should be determined to estimate the heat exchange rate between ground and borehole heat exchangers (BHE) and the system performance during long-term operating periods. However, the process increases the initial cost and construction period, which causes the system to be hindered in distribution. On the other hand, much research has been applied to the artificial neural network (ANN) to solve problems based on data efficiently and stably. This research proposes the predictive performance model utilizing ANN considering local characteristics and weather data for the predictive performance model. The ANN model predicts the entering water temperature (EWT) from the GHEs to the heat pump for the modular GHEs, which were developed to reduce the cost and spatial disadvantages of the vertical-type GHEs. As a result, the temperature error between the data and predicted results was 3.52%. The proposed approach was validated to predict the system performance and EWT of the GSHP system.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.27 no.5
• /
• pp.203-211
• /
• 2023

For fast-built and safe precast concrete (PC) construction, the dry mechanical splicing method is a critical technique that enables a self-sustaining system (SSS) during construction with no temporary support and minimizes onsite jobs. However, due to limited experimental evidence, traditional wet splicing methods are still dominantly adopted in the domestic precast industry. For PC beam-column connections, the current design code requires achieving emulative connection performances and corresponding structural integrity to be comparable with typical reinforced concrete (RC) systems with monolithic connections. To this end, this study conducted the standard material tests on mechanical splices to check their satisfactory performance as the Type 2 mechanical splice specified in the ACI 318 code. Two PC beam-column connection specimens with dry mechanical splices and an RC control specimen as the special moment frame were subsequently fabricated and tested under lateral reversed cyclic loadings. Test results showed that the seismic performances of all the PC specimens were fully comparable to the RC specimen in terms of strength, stiffness, energy dissipation, drift capacity, and failure mode, and their hysteresis responses showed a mitigated pinching effect compared to the control RC specimen. The seismic performances of the PC and RC specimens were evaluated quantitatively based on the ACI 374 report, and it appeared that all the test specimens fully satisfied the seismic performance criteria as a code-compliant special moment frame system.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.7
• /
• pp.37-47
• /
• 2010

To improve the grout penetration characteristics, a vibratory grout injection technique was adopted in this study. It is a technique of grout injection in which an oscillating pressure is added to the steady-state pressure as an injection pressure. By applying the vibration during grout injection, cement particles will become less adhesive and the clogging tendency will be decreased. A series of pilot-scale chamber tests were performed to verify the enhancement of the groutability by applying the vibratory grout injection; assessment on the change of the lumped parameter $\theta$ which represents a barometer of clogging phenomenon was made. Moreover, the effect of vibratory grout injection through the joint was also investigated using artificially made rock joints. Experimental results as well as analytical results show that the grout penetration depth can be substantially improved by vibratory grouting. Moreover, it was found that enhancement of the permeation grouting due to vibratory injection is more dominant at grouting pressure less than 400 kPa.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.2
• /
• pp.257-261
• /
• 2022

Additive manufacturing (AM, also known as 3D printing) applied to the construction industry is implemented and verified for various effects since advantages such as high design freedom, improving worker safety, and predictable construction period. However, due to the low maturity compared to the existing technology, studies are underway to solve new problems that occur in the overall of AM technology. In this paper, we confirm the effect of low construction surface flatness on the stacked features in the process of on-site AM construction. In particular, unstable AM features are determined through quantitative analysis by laser scanning, and a construction strategy is proposed for the surface flattening.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.2
• /
• pp.26-45
• /
• 2011

The Gongchengzuofazeli, which was published in 1734, the 12th year of the Yongzheng (雍正) emperor of the Ching Dynasty, is an authoritative book that discusses the architectural technology and engineering practices at that time. Moreover, buildings constructed during the Ching Dynasty are substantially similar with the book's content. This study is important in that it is done as the first step in conducting a comparative analysis between the Korean and Chinese wood structure mechanism. First, each content of the book is examined according to the editing order. And second, the standard for division between Da-shi (大式) and Xiao-shi (小式) architecture in terms of heavy woodwork method (vol. 1~27) is redefined, from which a new organization is deduced.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.5
• /
• pp.129-138
• /
• 2018

The purpose of this study is to analyze and evaluate the significance of undulated planes of architectural landscape methodology, to assess if the methodology had potential to be a sustainable architectural model, to be experimented in future. To achieve this purpose, the historical origins and changes of the landscape is discussed to analyse how it influenced modern architecture. Then the effects of panoramic sensibility derived from the picturesque garden is analysed to evaluate the influence it had on the change of the perception of space and modern architecture and landscape design strategy. Then 1980s and 1990s' symposiums and landscape theories are examined. To find pivotal moment of merging landscape and architecture, the design schemes of Bernard Tchumi and OMA for La Villette competition are selected as manifestations to show co-existence of landscape and architecture. Afterwards Yokohama ferry terminal is analyzed to present the undulated planes deployed for the union of landscape and architecture, to the affect of uninterrupted spatial connectivity. The impact of undulated plane on interior is explored in analysis of Rolex Learning Center, consequently changing the relationship within functions of the interior and the role of circulation. Finally, the spatial characteristics and significance of undulated plane is explored. The spatial characteristics are, the relationship beyond the visual connection through seamless connection; the multiple access paths and discard of transition space thereby diminishing boundaries; the environmentalization of architecture by spatializing circulation and promoting in-hierarchy. The significance of undulated planes are, the synthesis form of architectural typology; the cultivation of public sense; the closest spatial type to the space of appearance referred to by Hannah Arendt.

• The Journal of Engineering Research
• /
• v.6 no.1
• /
• pp.65-74
• /
• 2004

This study concentrates on a new idea that is formulated as a creative spatialization in contemporary architecture. Suggested from the classical baroque, this study tries to open the actual sense area of 'the baroque' by analysing the architectural ideas of wrenching and folding by Frank O. Gehry. The redefined 'new baroque' operates in the chain of the transformable and flexible images that must be recognized as 'the real' in the sense of 'the most empirical' and are vulnerable to dispersal. The typical instrument of Gehry's 'new baroque architecture' is the enclosing of the space and its folding. This idea meet the theoretical gravitation field of the philosophy of Deleuze, in which the reconstituted baroque conception means the tension between the folds, on expansion and contraction of which the variable space is dependent. Through the general principle of 'the new baroque', a free dispersal of power, to architect is offered the possibility, to make the real world intimate to the real life and to produce from there a vivid new space, and to enjoyer and viewer the possibility, to perceive the operating power in and around oneself.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.28 no.4
• /
• pp.89-97
• /
• 2022

Purpose: Because of the recent COVID-19 pandemic, there have been many cases of using portable negative pressure unit to convert general wards into temporary negative pressure isolation wards. The purpose of this study is to analyze the indoor environment of the switching type wards. Methods: Field measurements and experiments were conducted in a medical facility. Air volume, wind speed and pressure difference were measured in non-occupant state. Dispersion tests were performed with gas and particle matter. Results: The pressure difference between the wards and the corridor was higher than -2.5 Pa in normal situation. However, in the gas and particle dispersion tests, it was found that there were concerns about the spread through leakages in low-airtight walls or ceilings. In addition, it was confirmed that the pressure imbalance in ducts through the non-sealed diffusers could cause back flow during portable unit operation. Furthermore, when there was a pressure difference between adjacent wards planned to be at same pressure level, the possibility of the spread through the leakages was found. Implications: When using portable units for making switching type wards, it is necessary to create airtight space and seal the non-operation diffusers. In case of operating the air handling unit, T.A.B must be performed to adjust the duct balancing.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.5
• /
• pp.87-97
• /
• 2022

Although the use of BIM in architectural projects has increased, repetitive modeling tasks and frequent design errors remain as obstacles to the practical application of BIM. In particular, interior finishing elements include the most varied and detailed requirements, and thus requires improving its modelling efficiency and resolving potential design errors. Recently, visual programming-based modules has gained traction as a way to automate a series of repetitive modeling tasks. However, existing approaches do not adequately reflect the practical modeling needs and focus only on replacing siimple, repetitive tasks. This study developed and evaluated the performance of three modules for automatic detailing of walls, floors and ceilings. The three elements were selected by analyzing the man-hours and the number of errors that typically occur when detailing BIM models. The modules were then applied to automatically detail a sample commercial facility BIM model. Results showed that the implementations met the practical modeling requirements identified by actual modelers of an construction management firm.

• Korean Journal of Heritage: History & Science
• /
• v.33
• /
• pp.256-273
• /
• 2000

This thesis attempts to investigate the design of the bracket sets(eave-supporters) of Dapo-style architecture(multiple-bracket architecture) in order to discover the change and the characteristic of the Yon-Hwa-Hyong bracket sets. The external shape of eave-supporters has been evolved as following order: Kyo-Du-Hyong, Soe-Seo-Hyong, Cho-Gak-Soe-Seo-Hyong, and Yon-Hwa-Soe-Seo-Hyong. The internal shape has been developed as following order: Kyo-Du-Hyong. Cho-Gak-Hyong and Yon-Hwa-Hyong. Kyo-Du-Hyong represents the 17th century style and Yon-Hwa-Hyong has been used since the mid 18th century. Cho-Gak-Hyong signifies the transformation in the structural and designing role of column section and middle section and there appears a unified aspect in Yon-Hwa-Hyong. The transformation from Kyo-Du-Hyong towards Yon-Hwa-Hyong suggests that this is an intention of symbolizing the Buddhist teachings inside and outside of the eave-supporters. The purpose of this change establishes the Buddhist land.