• Journal of Korean Clinical Nursing Research
• /
• v.25 no.1
• /
• pp.1-14
• /
• 2019

Purpose: This study was done to develop a evidence-based guideline for pain assessment and management in Korea by adapting previously developed pain guidelines. Methods: The guideline adaptation process was conducted using 24 steps according to the guideline adaptation manual developed by Hospital Nurses Association in 2012. Results: The newly developed pain management guideline consisted of 9 domains and 234 recommendations. The number of recommendations in each domain was: 13 general instruction items, 51 pain assessments, 14 pain interventions, 66 pharmacological interventions for acute pain, 41 pharmacological interventions for chronic cancer pain, 35 pharmacological interventions for chronic noncancer pain, 21 non-pharmacological interventions, 2 documentations, 10 nursing education items, for pain. Conclusion: The findings suggest that the new pain management guideline can be used to address pain in hospital settings.

• Microbiology and Biotechnology Letters
• /
• v.46 no.4
• /
• pp.320-325
• /
• 2018

Hepatitis E virus (HEV) infection accounts for 20 million annual infections worldwide. HEV can be fatal in approximately 20-30% of pregnant women. HEV infections are normally self-limiting and mostly asymptomatic. However, in patients with insufficient immunity, such as acquired immunodeficiency syndrome patients, chronic and often fatal infections may ensue. Therefore, it is likely that host immune responses, especially interferon responses, play a critical role in HEV infection control. Here, we report that an HEV-encoded non-structural protein down-regulates type I interferon response. In addition, some other immune genes involved in the induction of type I interferon may be regulated as well. Detailed molecular mechanisms are currently being studied.

• Journal of radiological science and technology
• /
• v.41 no.6
• /
• pp.595-602
• /
• 2018

Quality control (QC) of Computed Tomography (CT) devices is based on image quality measurement on AAPM CT phantom which is a standard phantom. Although it is possible to control the accuracy of the CT apparatus, it is expensive and has a disadvantage of low penetration rate. Therefore, in this study, we make image quality measurement phantom at low cost using FFF (Fused Filament Fabrication) type three-dimensional printer and try to analyze the usefulness, compare it with existing standard phantom. To print a phantom, We used three-dimensional printer of the FFF system and PLA (Poly Lactic Acid, density: $1.24g/cm^3$) filament, and the CT device of 64 MDCT (Aquilion CX, Toshiba, Japan). In addition, we printed a phantom using three-dimensional printer after design using various tool based on existing standard phantom. For image quality evaluation, AAPM CT phantom and self-generated phantom were measured 10 times for each block. The measured data were analyzed for significance using the Mannwhiteney U-test of SPSS (Version 22.0, SPSS, Chicago, IL, USA). As a result of the analysis, phantom fabricated with three-dimensional printer and standard phantom showed no significant difference (p>0.05). Furthermore, we confirmed that image quality measurement performance of a phantom using three-dimensional printer is similar to the existing standard phantom. In conclusion, we confirmed the possibility of low cost phantom fabrication using three dimensional printer.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.01a
• /
• pp.53-56
• /
• 2019

본 논문에서는 화력을 이용하는 대형 파워 플랜트 설비의 미세먼지 발생량을 저감시키고 능동적으로 제어 할 수 있는 효율적인 시스템을 제안한다. 이 시스템은 기존의 고정형으로 설계된 집진기 방식의 고정부하량 한계점과 극복하고 초미세먼지 PM2.5, 미세먼지 PM10의 발생량에 따라 IoT센서 감지에 의해 지능형 알고리즘으로 효율적으로 저감 제어 처리량을 극대화하고, 미세먼지 발생량을 최소화한다. 또한 이 시스템의 차별성은 기존의 집진기에서 잡혀지지 않는 초미세먼지를 새로운 형태의 물질인 FAA(Fine-dust Adsorption Agent)를 통해 연료 연소 시 발생되는 초미세먼지 미세입자 자체를 크게 만들어 기존 설비 집진기 필터에 포집되게 하는 혁신적인 방식이다. 이번 연구를 통해 350도~1000도 열원에서 작용할 수 있는 화학물질 FAA 용액(Agent)을 개발 하였으며 지능형 AI 분사장치를 통해 연료에 첨가되어 연소 시 미세먼지를 20배~50배까지 볼륨을 확대시켜 기존 집진필터에 포집될 수 있게 동작된다. 이때, 기존 설계된 집진기의 한계(부하)용량에 상관없이 미세먼지 발생량을 상황인식 반응형 알고리즘(AI제어) 통해 분사량을 능동적으로 조절하여 미세먼지 발생량을 저감하는 진보적 혁신성을 지닌다.

• Journal of radiological science and technology
• /
• v.44 no.4
• /
• pp.335-342
• /
• 2021

Studies on the side effects of contrast agents are being discussed based on various cases, but studies analyzing the chemical structure of the underlying contrast agents are difficult to understand as the manufacturers have not disclosed them. Therefore, in this study, the chemical structure of the contrast medium was analyzed using ¹H-NMR spectrometer for Omnipaque contrast medium prepared from Iohexol, which is a nonionic iodide contrast medium, Xenetix contrast medium from Iobitridol, and Iomeron contrast medium from Iomeprol. As a result, it was found that the Omnipaque contrast medium of Iohexol had 6 carboxyl groups, 3 carbonyl groups, 4 amine groups, 1 methyl group, and 2 cyano groups. It was found that the Xenetix contrast medium of the iobitridol formulation had 6 carboxyl groups, 3 carbonyl groups, 2 amine groups, and 4 cyano groups. It was found that the Iomeron contrast agent of the Iomeprol formulation had 5 carboxyl groups, 3 carbonyl groups, 4 amine groups, 1 methyl group, and 2 cyano groups. As shown in this study, the chemical structure of the non-ionic monomer contrast agent increases its affinity with water by binding a number of hydroxyl groups (OH) to the carboxyl group. It is necessary to accurately identify each of these factors and analyze the physical and chemical changes of the contrast medium according to various environmental factors.

• Korean Journal of Metals and Materials
• /
• v.46 no.10
• /
• pp.672-682
• /
• 2008

The resistance spot welding of TRIP590 steels was investigated to enhance understanding of weld fracture during tensile-shear strength (TSS) test. The main failure modes for spot welds of TRIP590 steels were nugget pullout and interfacial fracture. The peak load to cause a weld interfacial failure was found to be related to fracture toughness of the weld and the weld diameter. Although interfacial fracture occurred in the samples, the load carrying capacity of the weld was high and not significantly affected by the fracture mode. Substantial part of the weld exhibits the characteristic dimple (or elongated dimple) fractures on interfacial fractured surface, in spite of the high hardness values associated with the martensite microstructures. The high load-bearing ability of the weld is directly associated with the area of ductile fracture occurred in weld. Therefore, the judgment of the quality of resistance spot welds in TRIP590 steels, the load carrying capacity of the weld should be considered as an important factor than fracture mode.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.12 no.3
• /
• pp.103-118
• /
• 2002

To provide the privacy of transmitted message over network the use of cryptographic system is increasing gradually. Because the security and reliability of the cryptographic system is totally rely on the key, the key management is the most important part of the cryptographic system. Although there are a lot of security products providing encryption, the security of the key exchange protocols used in the product are not mostly proved yet. Therefore, we have to study properties and operation of key agreement protocols based on elliptic curve in ANSI X9.63. furthermore, we analyze the security of their protocols under passive and active attacker models and propose the most suitable application field taking the feature of the protocols into account.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.6
• /
• pp.1606-1615
• /
• 2021

The purpose of this study is to provide basic data for injury prevention and performance improvement by developing a flywheel training program for handball players. The results of analyzing the effects of the 12-week complex flywheel training program on body composition, physical fitness factors, anaerobic power, and isokinetic muscle function are as follows. There was a significant difference between groups in push-ups. Body fat percentage and anaerobic power showed significant differences in the interaction by period. Long jump, slow jump, grip strength, back muscle strength, anaerobic average power, and isokinetic muscle function tests showed significant differences by period in the left and right flexors. Therefore, it is considered that 12-week flywheel training results can be used as the basic data for injury prevention and improvement of performance in handball players.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.57 no.4
• /
• pp.302-315
• /
• 2021

In this study, factors such as improvement of a fishing process and safety, reduction of the labor force and headcount and development of the automation technology for offshore (eel and crab) pot fishing vessels were analyzed. A questionnaire survey was conducted to analyze and select the key factors using independent/paired sample t-test and correlation analysis, and a living lab was operated with ship owners, skippers and experts to discuss practical needs of the site. From the result of questionnaire survey and field requirements, it was possible to understand the level of awareness of ship safety, general safety equipment, fishing work process and fishing safety equipment from the point of view of the field. In addition, there were differences in the measurement results of each items because the working environment and experience were different according to the position of the ship owner and the skipper. The results of the questionnaire survey and various perceptions of field stakeholders were reflected when analyzing the fishing system and fishing process to choose the development equipment applicable to the field. From the analysis results, the selected development equipment based on the fishing equipment and process currently in operation are pot washing device, catch separation and fish hold injection device, length limit regulations and bait ejection device after use, automatic main line winding device, bait crusher, automatic (crab) pot hauling separator and so on.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.11
• /
• pp.1615-1622
• /
• 2022

In order to overcome the limitations of the instructor-centered lecture-style teaching method, recently, flipped learning, a learner-centered teaching method, has been widely introduced. However, despite the many advantages of flipped learning, there is a problem that students cannot solve questions that arise during prior learning in real time. Therefore, in order to solve this problem, we developed DBbot, an assistant chatbot for database design course managed in the flipped learning method. The DBBot is composed of a chatbot app for learners and a chatbot management app for instructors. Also, it's implemented so that questions that instructors can anticipate in advance, such as questions related to class operation and every semester repeated questions related to learning content, can be answered using Google's DialogFlow. It's implemented so that questions that the instructor cannot predict in advance, such as questions related to team projects, can be answered using the question/answer DB and the BM25 algorithm, which is a similarity comparison algorithm.