• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.1
• /
• pp.57-65
• /
• 2008

Purpose: Misfit of implant components was very important in terms of prosthodontics. they has been linked to prosthetic complications such as screw loosening and fracture. Although there are many results about rotational freedom or machining tolerance between fixture and abutments, the data about domestic implant systems are lacking. The aim of this in vitro study was to evaluate the rotational freedom of domestic external and internal connection implant systems between their fixtures/anlaogs and abutments comparing imported systems. Materials and Methods: Rotational freedom between abutments and fixtures/analogs was investigated by using digitalized rotational angle measuring device. (1) 1 domestic external connection system(Neobiotec) and 2 imported external connection systems(Nobel Biocare, Anthorgyr), (2) 1 domestic internal connection system(Dentium) and 4 imported external connection systems(Nobel Biocare, Anthorgyr, Straumann, Frident Dentsply), and (3) 1 domestic zirconia external connection abutment(ZirAce) were evaluated. Each group has 3 samples. Mean values for each group were analyzed. Results: The differences relative to rotational freedom between domestic and imported implant systems were observed but domestic external connection implant system showed about 2.67 degrees(in case of fixture) and internal connection system showed about 4.3 degrees(in case of fixture). Domestic zirconia abutment showed less than 3 degrees of rotational freedom in a situation where the abutment was connected to an implant fixture egardless of domestic or imported systems. Conclusion: Newly developed digitalized rotational angle measuring device has high measuring resolution. The rotational freedom of domestic implant systems were similar to imported implant systems.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.110-113
• /
• 2010

해양플랜트 구조물은 대양에서 파력을 비롯한 바람 등과 같이 자연에 의해 발생하는 다양한 외력을 구조물 사용기간 동안 지속적으로 랜덤하게 받게 되므로 이로 인한 피로현상이 발생하게 된다. 특히 용접부로 이루어진 격점부는 복잡한 기하형상의 영향으로 피로에 대해 취약구조가 되므로 피로강도향상은 해양플랜트 구조의 안전성에 중요한 요인이 된다. 본 연구에서는 격점부에 대한 구조상세에 관련한 설계기준 및 평가방법을 조사하였으며, 고정식 Jacket 구조물을 대상으로 프레임요소를 사용하여 구조해석을 실시하여 공용하중에 대한 구조거동을 분석하였다. 또한 격점부의 강도평가방법 및 연결부 피로강도를 개선하기 위하여 프레임요소의 구조해석을 토대로 복잡한 기하형상을 가진 KT형 관이음부(Tubular Joints)에 대해 상세해석을 실시하였다.

• Proceeding of KASS Symposium
• /
• 2008.05a
• /
• pp.37-42
• /
• 2008

Cable member in structure is tension systems in which the load carrying members transmit loads to support system by tensile stress with no compression or flexure allowed. Cable system have been widely used large span structure roof, air-supported structure, prestressed membrane, cable network roof, suspension structures, guyed tower, ocean platforms, suspension bridges. Cable member can transmit loads by the edge connected system such as socket, swaging, mechanical splice sleave, clip, wedge, loop splice etc. This study will shown an experimental results on the strength of connection socket of cables. In the results of experiment, most of cable connection specimen occurred the failure at the connection socket part before the cable arrived at tensile failure load.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.04a
• /
• pp.85-88
• /
• 2007

본 연구에서는 베이지안 망 구조 학습에서, 학습 데이터의 특정 부분집합이 학습된 망의 각연결 구조(edge)의 형성에 기여하는 정도를 정량화하는 방법을 제안한다. 생물학 정보의 분석 등에 베이지안 망 학습을 이용하는 경우, 제안된 방법은 망의 각 연결 구조의 형성에 특정 군집 데이터가 기여하는 정도의 정량화가 가능하다. 제안된 방법의 유효성을 보이기 위해, 벤치마크 베이지안 망을 이용하여 제안된 방법이 망 연결 구조에 대한 데이터 군집별 기여도를 효과적으로 정량화 할 수 있음을 보인다.

• Korean Journal of Cognitive Science
• /
• v.6 no.1
• /
• pp.5-30
• /
• 1995

Fodor and his followers argue that connectionist model does not have compositional structure,or else it is merely an implementation of a classicist model.'Classical constityency'is used importantly to show connectionist model does not have compositional structure.However,in contrast Fodor and his followers,I maintain that it is possible for connectionist model to have compositional structure without attributing classical constituency to cognitive model,and the very classical consitiuency makes the connectionist model nonimplementational.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.929-932
• /
• 2004

DRACO 구조는 이중 링 연결형태에 대비하여 노드간 접근 경로를 단축할 수 있는 구조로, CC-NUMA 시스템에 대하여 그 적용성과 프로토콜이 시험되어 그 효율성이 입증되었다. 본 논문은 이러한 DRACO 구조가 보다 많은 프로세서를 수용할 수 있는 클러스터 시스템에 대하여 동일한 경로 단축과 대역폭 확장을 적용할 수 있음에 기반하여, 이중 연결 링크를 가지고 있는 점대 점 연결 형태의 클러스터 시스템에 대한 적용성을 연구하였다. 노드 내의 네트워크 인터페이스 및 소프트웨어만을 이용한 DRACO 구조 적용은 많은 수의 노드를 필요로 하는 시스템에 적합하고, 하드웨어를 이용한 연결 경로를 이용할 경우 상대적으로 적은 수의 노드를 채용하고 고속의 링크 성능을 필요로 하는 시스템에 적합할 것이다.

• Journal of KSNVE
• /
• v.14 no.2
• /
• pp.46-53
• /
• 2004

압전션트감쇠란 압전재료를 구조물에 부착시키고 간단한 션트회로를 연결시켜 구조물의 진동에너지를 압전재료에서 전기적 에너지로 변환시킨 후 연결된 회로에서 전기에너지를 열 에너지로 소산시킴으로서 구조물의 진동 및 소음을 저감시키는 방법이다. 이 방법은 공진주파수에서 간단한 회로를 사용하여 효과적으로 진동 및 소음을 저감시킬 수 있으며 구조가 간단하고 가격이 저렴하므로 소음진동의 여러분야에 응용이 가능하다. 본 글에서는 압전션트 감쇠의 원리와 단일모드, 다중모드의 감쇠 기법의 이론을 소개한다.(중략)

• Journal of the Korean Magnetics Society
• /
• v.25 no.1
• /
• pp.22-26
• /
• 2015

In this paper, a magneto-inductive wave generated in a chain of LC resonators fabricated with Ni-Zn ferrite cores and chip capacitors is presented. RF signal propagates to neighbor resonator one by one as a consequence of the magnetical coupling between two resonators in the device. The magnetical coupling is due to the mutual inductances along the chain of resonators. So, the signal amplitude (${\approx}$ coupling intensity) is dependent of the mutual inductance which can be adjusted by applied magnetic field. In order to demonstrate the device, some experiments have been carried out systemically. The transmission characteristics of a magneto-inductive wave could be controlled by applied external magnetic field. The device composed of 5 resonators; the center frequencies were estimated to be 32 MHz and 38 MHz with the external magnetic flux density of 75 Oe and 222 Oe, respectively. We expect that the reported results could open a promising way to a high variety of applications in one- and two-dimensional functional devices, such as transducers, delay lines, power dividers and couplers.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.9
• /
• pp.487-494
• /
• 2004

The multiprocessor system suffers interconnection network contension while exploiting the program's parallelism. A CC-NUMA system based on point-to-point link ring structure is one of the scalable architectures that expand the system bandwidth the number of processors/nodes increases. The dual-ring system is a simple solution to enhance the system performance and scalability by duplicating the links. In ring-based systems, an unbalanced transaction among links makes a hot spot on the interconnection network. In this situation, total system performance and scalability are bound by the hot spot of the links In this paper, I propose a dual-link CC-NUMA system, which alleviates the concentration of transactions among the links. By the simulation results, the proposed system significantly outperforms the single-ring and bidirection dual-ring systems. In addition, the proposed system show better distribution of transactions among the links that achieves an extended scalability.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.9
• /
• pp.2391-2402
• /
• 1997

TINA is the Open Networking Architecture which as newly introduced software architecture shares the network managements and the service managements on the Distributed Processing Environment. In this paper, based on the concepts and principles defined up to now, we implement and test the CM(Connection Management) Package included in CM which is one of the six functional areas into which TINA Management Architecture is devided. Before the implementation we learn the basic concepts accepted by the four architectures in TINA, and medelling concept of the CM. The interfaces of eaxh information objects explain the functions of computational objects implemented, and the message flows among the computational objects show the connection setup and release procedures.