• Proceeding of EDISON Challenge
• /
• 2017.03a
• /
• pp.340-345
• /
• 2017

DNA 나노구조물을 설계 및 개발, 해석하기 위해서는 기본적인 홀리데이 연결(Holliday junction) 구조에 대한 물성을 아는 것이 필수적이다. 여러 실험 및 시뮬레이션을 통해서 홀리데이 연결 구조 물성을 측정하려는 시도가 많았지만, 아직까지도 홀리데이 구조에 대한 정확한 물성은 얻어지지 않았다. 이번 연구에서는 6HB-DNT 모델을 분자동역학 기법을 이용하여 DNT 모델의 물성을 분석하고, 이를 기반으로 유한요소 모델링을 통해 홀리데이 연결의 물성을 해석한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04a
• /
• pp.634-636
• /
• 2004

멀티미디어 홈 네트웍 환경에서 IEEE1394는 멀티미디어 데이터 전송을 위한 대표적인 네트웍 프로토콜로 사용되고 있으나, 멀티미디어 데이터 전송을 위한 등시성 연결의 관리에 어려움이 많다. 이와 관련하여 본 논문에서는 IEEE1394 네트웍의 등시성 연결 관리 구조를 제안한다. 또한 제안되는 구조상에서 IEEE1394의 비동기 전송을 이용하여 등시성 전송을 관리함과 더불어 코바 API를 통하여 멀티미디어 전송을 위한 등시성 연결을 관리하는 방법에 대하여 다루고 있다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1996.10a
• /
• pp.19-28
• /
• 1996

본 논문에서는 유연 연결부를 갖고 있는 이차원 구조물의 비탄성 좌굴해석을 연구하였다. 본 해석을 통하여 구조물의 기하학적, 및 재료적 비선형 뿐만 아니라 유연 연결부의 비선형 효과가 구조물의 거동과 강도에 미치는 영향을 예측할 수 있다. 본 해석 결과는 실험 결과와 비교하였으며 예제해석도 수행하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.5
• /
• pp.455-463
• /
• 2010

This is a basic experimental study to apply FRP modular box member to a variety of construction structures exposed to flexural strength, such as a slab and a girder. Tests were conducted under various conditions in order to analyze jointing performance features of the developed FRP modular box member as a large section. For the methods of jointing FRP modular box member, chemical connection, mechanical connection, and a combination of both were used to test both vertical and horizontal jointing. As a result of the test, using urethane+two bolts+sheets was the most efficient method of connecting FRP modular box member, and confirmed the efficient behavior by a finite element analysis.

• Journal of Korean Society of Steel Construction
• /
• v.21 no.6
• /
• pp.647-657
• /
• 2009

This paper studies the behavior of joints in steel-PSC (prestressed concrete) hybrid beams, which is necessary for the application of hybrid beams to spliced girder bridges, and proposes a new type of joint with improved construction convenience and structural behavior. In the proposed joint, perfobond rib shear connectors are attached to the upper and lower plates, which are expanded from the steel girders and located between the steel girder and the PSC girder. The experimental tests were performed on hybrid beams with the suggested joint. The results showed that all the beams had similar ultimate strengths and failure modes, due to the failure of their PSC parts. The composite action of the perfobond ribs was verified by examining the initial stiffness and cracks of the test beams. In addition, the test beams showed a higher degree of ultimate strength than the beams with stud shear connectors in the joints that had been previously studied. Thus, the proposed joint is effective for the steel-PSC hybrid beam.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.6 s.52
• /
• pp.57-65
• /
• 2006

This paper presents hybrid structural damage monitoring system which performs both global damage assessment of structure and damage detection of local structural joints. Hybrid damage monitoring system is composed of vibration-based technique and electro/mechanic impedance technique. Vibration-based technique detects global characteristic change ot structure using modal characteristic change of structure, and electro/mechanical impedance technique detects damage existence of local structural joints using impedance change of PZT sensor. For the verification of the proposed hybrid monitoring system, a series of damage scenarios are designed to loosened bolts situations of the structural joints, and acceleration response and impedance response signatures are measured. The proposed hybrid monitoring system is implemented to monitor global damage-state and local damages in structural joints.

• Tunnel and Underground Space
• /
• v.23 no.4
• /
• pp.261-270
• /
• 2013

As part of the development of the 3-D geologic modeling software, this study addresses on new development of software modules that can perform the analysis and visualization of the fracture network system in 3-D. The developed software modules, such as BOUNDARY, DISK3D, FNTWK3D, CSECT and BDM, are coded on Microsoft Visual Studio platform using the MFC and OpenGL library supported by C++ program language. Each module plays a role in construction of analysis domain, visualization of fracture geometry in 3-D, calculation of equivalent pipes, production of cross-section map and management of borehole data, respectively. The developed software modules for analysis and visualization of the 3-D fracture network system can be used to tackle the geomechanical problems related to strength, deformability and hydraulic behaviors of the fractured rock masses. All these benefits will further enhance the economic competitiveness of the domestic software industry.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.29
• /
• pp.26-41
• /
• 2010

본 연구에서는 쌍동선 연결부의 횡강도와 관련하여 국내기준 및 국제표준, 선급 기준의 관련 내용을 조사하고 각 하중에 대한 계산식 및 관련 계수들에 영향을 미치는 외력 등을 비교 분석하며 샘플선박에 대한 구조계산 및 해석을 수행하여 국내에 적합한 쌍동선 연결부의 횡강도 구조안전성 평가기준을 제시하고 국제표준에 대한 대응방안을 마련하고자 한다.

• Computational Structural Engineering
• /
• v.2 no.2
• /
• pp.6-13
• /
• 1989

현재 구조해석의 컴퓨터 응용과 건축설계도면작성의 컴퓨터 응용이 개별적으로 개발되는 경우가 많은데 한꺼번에 모든 시스템을 일련으로 연결하는 것은 쉬운 일이 아니므로, 우선 구조해석의 자료를 그대로 이용할 수 있는 골조도면작성의 컴퓨터 응용프로그램을 개발함으로써 앞으로 건축설계도면작성 프로그램과 연결도 고려할 수 있다고 본다. 본 CAD시스템은 현재에는 국내에서 통용되고 있는 건설부 규준에 의거하여 개발되었고, ACI의 극한강도 설계법으로 sub-program을 수정하여 이용할 수 있겠다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.7
• /
• pp.25-32
• /
• 2019

Welded joints and mechanical joints using bolt connection have been used as a pile-to-pile connecting method for PHC piles. These PHC pile joint methods may have difficulty in securing connecting quality and connecting performance in PHC pile joining process. Therefore, this study proposes a non-welded connection plate type mechanical PHC pile joint to improve the disadvantages of existing PHC pile connection methods and to secure the connection performance of PHC pile joint. Its connection performance was evaluated from nonlinear FE analysis and loading tests for actual PHC piles with suggested pile joints. From nonlinear FE analysis for the proposed PHC pile joint, it was evaluated to have sufficient connection performance under flexural, compressive, tensile, shear, and eccentric compressive load condition. PHC piles connected by the suggested connection plate type mechanical PHC pile joint show that they show stable linear behaviors for the crack moment and the flexural moment level of the PHC pile. Therefore, the proposed a non-welded connection plate type mechanical PHC pile joint can secure sufficient connection performance in PHC pile.