• Journal of the Korean Geotechnical Society
• /
• v.36 no.12
• /
• pp.125-132
• /
• 2020

Embedded joints in the rock mass are a major constituent influencing its mechanical behavior. Numerical analysis requires a rigorous modeling methodology for the rock mass with detailed information regarding joint properties, orientation, spacing, and persistence. This paper provides a mechanical model for a jointed rock mass based on the implicit joint-continuum approach. Stiffness tensors for rock mass are evaluated for an assemblage of intact rock separated by sets of joint planes. It is a linear summation of compliance of each joint sets and intact rock in the serial stiffness system. In the application example, kinematic analysis for a planar failure of rock slope is comparable with empirical daylight envelope and its lateral limits. Since the developed implicit joint-continuity model is formulated on a continuum basis, it will be a major tool for the numerical simulations adopting published plenteous thermal-hydro-chemical experimental results.

• The Journal of Engineering Geology
• /
• v.23 no.4
• /
• pp.329-340
• /
• 2013

A geologic survey of the Bukpyeong and Pohang basins, as candidate basins for the geological storage of $CO_2$, was performed to evaluate storage capacity and security. To analyze the mechanical stability of the storage reservoir and cap rocks, we measured the porosity, seismic velocity, uniaxial strength, internal frictional angle, and Young's modulus of core samples recovered from the two basins. It is costly and sometimes impossible to conduct tests over the entire range of drill holes, and continuous logging data do not yield the mechanical parameters directly. In this study, to derive the mechanical properties of geologic formations from the geophysical logging data, we determined the empirical relations between the physical properties (seismic velocity, porosity, and dynamic modulus) and the mechanical properties (uniaxial strength, internal friction angle) of the core samples. From the comparison with our core test data, the best fits to the two basins were selected from the relations suggested in previous studies. The relations between uniaxial strength, Young's modulus, and porosity of samples from the Bukpyeong and Pohang basins are more consistent with certain rock types than with the locality of the basins. The relations between the physical and mechanical properties were used to estimate the mechanical rock properties of geologic formations from seismic logging data. We expect that the mechanical properties could also be used as input data for a modeling study to understand the mechanical instability of rock formations prior to $CO_2$ injection.

• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.51-59
• /
• 2011

Tensile stress occurs and random crack develops in concrete pavement slab when it contracts by variation of temperature and humidity. The tensile stress decreases and the random crack is minimized by sawcutting the slab and inducing the crack with regular spacing. The random crack, joint damage, decrease of load transfer efficiency are caused by too wide joint spacing while too narrow joint spacing leads to increase of construction cost and decrease of comfort. A mechanistic-empirical joint spacing design method for the concrete pavement was developed in this study. Structurally and environmentally weakest sections were found among the sections showing good performance, and design strengths were determined by finite element analysis on the sections. The joint width for which the load transfer efficiency is suddenly lowered was determined as allowable joint with referring to existing research results. The maximum joint spacing for which the maximum tensile stress calculated by the finite element analysis did not exceed the design strength were found. And the maximum joint width expected by the maximum joint spacing were compared to the allowable joint width. The new method developed in this study was applied to two zones of Hamyang-Woolsan Expressway being designed. The same joint spacing as a test section constructed by 8.0m of joint spacing wider than usual was calculated by the design method. Very low cracking measured at 6 years after opening of the test section verified the design method developed in this study.

• Asia Marketing Journal
• /
• v.10 no.1
• /
• pp.95-131
• /
• 2008

This study serves the main research purpose of verifying the hypothetical relationship between antecedent and consequence variables of shopping experience based on the classification system by Schmitt (1999) who dimensionalized experience into five components (sense, feel, think, act, relate). Specifically, the study seeks to fulfill the following three research objectives. First, it substantiates dynamic relationships among the five experiential components comprising the strategic experiential modules that serve as the basis of the theoretical framework of the study. Especially, it focuses on interactive relationships among the experiential components by taking a holistic view of the experience. Second, the study seeks to uncover the effects of pre-experiential antecedents such as shopping motivation and shopping involvement, based on taxonomy of motivation as product-centered vs. experience-centered. Third, the study investigates the effects of shopping experience on intention to revisit with regard to department store, discount store, and Internet shops, based on customers' store experiences. The major findings from this study are as follows: first, the five experiential components were found to have a high level of correlations according to hypothesis verification. Second, shopping motivation was learned to have significant effects on preference toward thinking as well as feeling experiences. That is, product-centered (vs. experience-centered) shopping motivation exerted a greater influence on cognitive (vs. affective experience than affective (vs. cognitive) experience.

• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.41-48
• /
• 2011

Warm-Mix Asphalt(WMA) mixtures, which meet environmental protection and have high energy efficiency, are emerging as an alternative to hot-mix asphalt mixtures. The objective of this study is to evaluate WMA made with Aspha-min in the laboratory and to compare the design results accomplished by new Mechanistic-Empirical Pavement Design Guide(MEPDG) with control mixture. An asphalt mixture with a nominal maximum size of 12.5mm and PG64-28 binder was used. Resilient modulus tests for a control mixture and WMA with 0.3% and 0.5% of Aspha-min were conducted. The results obtained by MEPDG after inputting the test output into the design indicated that the predicted rut depth of WMA using Aspha-min was much lower than that of control mixture, and showed that WMA was more resistant to rutting than control mixture.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2009.11a
• /
• pp.158-159
• /
• 2009

감성은 동일한 대상에 대해서도 개인의 생활경험에 따라 다양하게 나타나며 시간과 환경에 따라 변화한다. 감성은 개인의 생활경험을 바탕으로 환경 자극에 직관적, 순간적으로 반응하기 때문에, 뇌의 복잡한 정보처리단계를 거치지 않으므로 그 개인은 느낀 감성을 잘 설명할 수 없고, 이러한 이유로 뚜렷한 심리반응이 유도되지 않으며, 뇌가 어떻게 생각하느냐에 따라 반응하는 신체반응 또한 미약할 수밖에 없다. 결론적으로, 감성은 종족유지를 위한 본능에 관련되어 직관적으로 나타나며, 그 측정방법도 이러한 차원에서 시도되어야 할 것이다. 본 연구에서는 행동인체운동역학에 기초하여 감성형 콘텐츠의 감성자극에 의한 인체 흉선의 생명에너지 흐름 제어력 변화를 이용하여 콘텐츠로부터 유발되는 감성을 측정하는 방법을 제안하고자 한다.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 1995.03a
• /
• pp.181-185
• /
• 1995

현재 구미에서 터널의 설계에는 RMR, Q와 같은 암반분류 기법과 경계요소 해석법과 같은 간략한 탄성 프로그램에 경험적 파괴조건식을 적용하여 이완대를 계산하고 터널의 지보량을 추정하는 방식이 널리 적용되고 있다. RMR이나 Q와 같은 암반분류법은 지하공동의 안정성에 영향을 미치는 중요한 지질 요인들에 근거하여 암반을 몇가지 등급으로 분류하고 지보방법을 결정하는 분류 방식으로 가장 많이 사용되고 있으나 각 항목의 평가방식이 경험적인 판단을 요하게 되어 주관적인 오류에 빠질 가능성이 많고, 또 여러 가지 대체 수단이 있어 종합적인 판단을 얻기가 용이하지가 않다. (중략)

• Magazine of the Korea Concrete Institute
• /
• v.8 no.4
• /
• pp.201-211
• /
• 1996

It is expected that recent development of the mechanical model will replace previous empirical methods of detailing. In this study, a mechanical model is proposed to analyze the behavior of the anchorage zone of prestressed concrete members. Main characteristics of the proposed model lies on its rational consideration of material properties, and concrete strength in biaxial stress state and that of local zone reinforced by spirals. Shear friction strength of concrete surrounding spirals are also considered. The results of' the proposed method as well as the known Strut-and-Tie method and nonlinear finite element analysis are compared with some typical experimental results. We get good agreement to the failure mode as well as the failure load from test results. And it can be shown that three dimentional failure mechanism, which cannot be expected by the method based on 2D analysis, can be explained by proposed model.

• Explosives and Blasting
• /
• v.15 no.1
• /
• pp.44-60
• /
• 1997

The design of underground cavern is basically governed by the mechanical properties of ground mass distributed around excavation. It is seldom possible to consider all the factors of ground mass properties in the evaluation of ground mass behavior as well as to classify those factors to a simple category. Until computer sciences have developed to calculate complex and laborious mechanical simulation of underground openings, ground behavior was quantitatively and qualitatively evaluated using empirical classification system. In this paper, analysis methods of ground behavior for underground cavern using the prediction of loosening zone, empirical method derived from rock mass classification and element stress analysis are described with chronological sequence.

• The Journal of Engineering Geology
• /
• v.1 no.1
• /
• pp.38-53
• /
• 1991

The design of underground cavern is basically governed by the mechanical properties of ground mass distributed around excavation. It is seldom possible to consider all the factors of ground mass properties in the evaluation of ground mass behavior as well as to classify those factors to a simple category. Until computer sciences have developed to calculate complex and laborious mechanical simulation of underground openings, ground behavior was quantitatively and qualitatively evaluated using empirical classification system. In this paper, analysis methods of ground behavior for underground cavern using the prediction of loosening zone, empirical method derived from rock mass classification and element stress analysis are described with chronological sequence.