• Economic and Environmental Geology
• /
• v.39 no.3 s.178
• /
• pp.301-328
• /
• 2006

The geology of the Tumbang Mirih area in the Middle Kalimantan, Indonesia comprises Permian to Carboniferous Pinoh Metamorphic Rocks and Cretaceous Sepauk Plutonics of the Sunda Shield, late Eocene Tanjung Formation, Oligocene Malasan Volcanics, Oligocene to early Miocene Sintang Intrusives and Quaternary alluvium. Results of geochemical exploration and geological mapping exposed obviously that large amounts of gold-bearing quartz veins were found in the whole Tumbang Mirih areas. In many places, gold grains were megascopically detectable from panning products of stream sediments and conglomerate as Quaternary sediments. Even though no remnants of quartz veins are revealed in the most of survey area except Taran region, association of fold grains with layers of quartz pebbles and clays which correspond to the horizon of unconformity or previous river bottom indicates that the gold grains were separated from quartz veins. Along rivers often pebbles and clay layers just over or 10 to 20cm above the current waterlevel are recognized. The occurrence of gold in the conglomeratic layer was frequently confirmed during geochemical exploration. Since the conglomeratic layer was old stream sediments of Quaternary, it can be assumed that deposition of golds was controlled by shape of river floor, speed and shape of river flow, and distance from the source rock. Taran area and northern Takaoi area based on the all data are recommended as the promising areas.

• Journal of the Korean Geophysical Society
• /
• v.9 no.1
• /
• pp.37-45
• /
• 2006

Velocity structures were defined in the vicinty of the 140-m deep test borehole in the pungam basin through simultaneous inversion of surface seismic refraction and far-ofset VSP traveltime data. Seismicenergy generated at the surface by a seisgun was recorded both at 42 surface locations at 3-m intervalsalong the profiles in the N20E and its orthogonal directions and at 71 m depth in the borehole. Forthe ofset VSP study, seismic energy was generated by a 5 kg sledgehamer at the surface in the horizontal ofset range of -19.5∼+19.5 m from the borehole. The seismic signals were detected at 9∼99 m depths with 1∼2 m intervals and recorded for 204 ms per shot. After shot static corrections,first-arrival times picked from both the surface refraction and borehole records were simultaneouslyinverted to yield velocity tomograms. The tomograms indicate that a 1.5 m thick soil layer with velocities les than 500 m/s overlies basements having a velocity range of 3,067 ∼5,717 m/s. Within the basements,∼4 m and deeper than 71 m. The high-velocit yzones may be due to conglomerates intercalated with sandstones and siltstones. No evidence for large-scale fracture zones or faults is detected near the borehole

• The Korean Journal of Petroleum Geology
• /
• v.3 no.1 s.4
• /
• pp.28-39
• /
• 1995

The objective of this study is to investigate the origin of the dolomite in the Pungchon Formation of the Choseon Supergroup near Taebaeg City, Kangwondo, Korea. The Pungchon Formation is composed of limestone, dolomitic limestone, and dolomite with thin beds of flat pebble conglomerate (FPC) and mudrock. Texturally, the dolomite in the Pungchon Formation can be divided into four types; 1) coarse-sized, xenotopic dolomite in massive dolomite, 2) medium-siEed, idiotopic dolomite in flat pebble conglomerate, 3) xenotopic dolomite replacing ooids, algalnodules, and echinoderms, and 4) the dolomite in mottled fabric. The dolomite in mottled fabric can be subdivided into three types; a) coarse-sized, xenotopic saddle dolomite cement, b) medium-sized, idiotopic, cloudy-centered, clear-rimmed (CCCR) dolomite, and c) coarse-sized, idiotopic dolomite. The carbon isotopic composition of the Pungchon dolomite is in the range of $-2.8-1.4\%_{\circ}(PBD)$, suggesting that the carbon isotopic composition was buffered by the preexisting marine carbonates. Lighter oxygen isotopic values ($\delta^{18}O-15.7-8.7\%_{\circ}, PBD$) indicate that the Pungchon dolomite may have formed under high temperature in a burial diagenetic environment. The higher initial $^{87}Sr/^{86}Sr$ ratio of the Pungchon dolomite (0.7010-0.7161) than that of the coeval Cambrian seawater (0.7088-0.7092) indicates that dolomitizing fluids had been modified from the isotopic exchange with continental crust. Low Sr and Na contents(<200 ppm) of dolomite agree well with previously reported data for burial dolomite. Hifh Fe and Mn contents of the dolomite support the idea that the Pungchon dolomite may have formed in a deep burial diagenetic environment.

• Economic and Environmental Geology
• /
• v.45 no.5
• /
• pp.565-578
• /
• 2012

Sedimentary facies of the Middle to Upper Cambrian Sesong Formation, Taebacksan Basin, are analyzed using detailed field mapping and stratigraphic section measuring. As a result, five sedimentary facies are recognized in the formation, which include lime nodule bearing shale facies, anastomosing wackestone-packstone facies, well-laminated siltstone facies, fine to medium sandstone facies and lime pebble conglomerate facies. Together with sedimentary facies analysis, study on vertical facies variation indicates that the Sesong Formation was deposited in an outer to inner shelf during relative sea-level fall. Especially, shallow marine aspects of the upper part of the Sesong Formation including 10-m-thick, fine to medium-grained sandstones appear to be very similar with the shallow marine strata accumulated during the Steptoean Stage (Dunderbergia) in Laurentia. These lithofacies comparisons of coeval strata between two continents suggest that sedimentation in the Sesong Formation reflects the influence of global sea-level fall occurred during the late Middle Cambrian to early Late Cambrian. As well, a stratigraphic discontinuity surface that may have sequence stratigraphic significance is recognized within the shallow marine sandstone beds of the uppermost Sesong Formation. This stratigraphic discontinuity surface may correspond to the Sauk II-III sequence boundary in Laurentia. Therefore, results delineated in this study will use a new stratigraphic paradigm for regional correlation of the Middle to Late Cambrian strata (e.g., the Sesong Formation) in the Taebacksan Basin, and will provide very useful information on intercontinental stratigraphic correlation in the future.

• Journal of the Korean earth science society
• /
• v.36 no.1
• /
• pp.27-35
• /
• 2015

This study aims to establish the age of the Cretaceous Togeum Formation in Gurye that reported the discovery of dinosaur eggshells and bones. This study also investigates to determine the period of the dinosaurs' dominance in the region. K-Ar ages are measured on the whole volcanic rocks in the lower - and upper parts of the formation. The six samples dated are volcanic pebbles deposited in the Geumjeongri Conglomerate that is distributed underneath the Togeum Formation, and the ages dated as Aptian ($118.3{\pm}2.3Ma$) or Albian ($103.6{\pm}2.0$, $102.5{\pm}2.0$, $99.9{\pm}1.9Ma$), which all correspond to the Early Cretaceous. In addition, the ages of andesites and porphyritic andesites overlying the Togeum Formation are dated in a similar way. The result is that the ages are apparently corresponding to the Campanian ($83.9{\pm}1.6$, $74.2{\pm}1.5$Ma) of the Late Cretaceous. Field evidence and the age results indicate that the formation of the Togeum and the activities of dinosaurs dated back between 84 and 100Ma. It suggests that the Togeum Formation be somewhat older than the Boseong Seonso Formation (81Ma) which contains egg shells, the Haenam Uhangni Formation (79-81 Ma) that has dinosaur, pterosaur and webbed bird footprints, and also older than the theropod egg nests (77-83Ma) found in the Aphaedo area.

• The Korean Journal of Petroleum Geology
• /
• v.7 no.1_2 s.8
• /
• pp.28-34
• /
• 1999

The Cretaceous Poongam sedimentary Basin in Kangwon-do, Korea consists alluvial deposits of conglomerates, sandstones, mudstones or siltstones, and volcaniclastics. The Poongam Basin was formed as a fault margin sag or a transpressional basin developed along a strike-slip fault zone, and received huge amount of clastic sediments from the adjacent fault-scaip. It formed an aggrading alluvial fan system and a volcaniclast-supplied marginal lake environment, while tectonic activity and volcanism attenuated toward the end of basin formation. Following the Folk's classification, the sandstones of the Poongam Basin are identified as lithic wackes or feldspathic wackes. The areal and sequential variation of the mineral composition in the sandstones is not distinct. The results of K-Ar age dating from the intruding andesites, volcaniclastics and volcanic fragments in sedimentary rocks show a range of 70 Ma to 84 Ma. It suggests that volcarism occurred sequentially within a relatively short period as the pre-, syn-, and post-depositional events. It was the short period in the late Cretaceous that the basin had evolved i.e., the basin formation, the sediment input and fill, and the , intrusion and extrusion of volcanic rocks occurred. The Poongam sedimentary sequence is a typical tectonic-controlled coarse sedimentary facies which is texturally immature.

• The Journal of the Petrological Society of Korea
• /
• v.25 no.4
• /
• pp.335-348
• /
• 2016

The fluvial Tamna Formation, consisting of conglomerate, sandstone and mudstone layers, is widely distributed in Jeiu Island. Various sizes of quartz crystals were identified from most of the Tamna Formation, including the mudstone layer. XRD analysis also shows that the mudstone layer is composed of various minerals, quartz, plagioclase, K-feldspar, mica, magnetite, hematite, olivine, amphibole, gibbsite, calcite, analcime and clay minerals such as illite, kaolinite, vermiculite, smectite, chlorite, $10{\AA}$-halloysite. There is a tendency showing that the more amount of kaolinite, vermiculite, and chlorite is present where the more amount of quartz crystals is present. It is likely that the main source materials contributing to the Tamna Formation were from the parental rocks containing abundant quartz grains, suggesting that the Tamna Formation could not be related to Jeju volcanic rocks, but possibly to pre-existing basement rocks. Thus, we propose that the Tamna Formation was formed from the materials derived from both pre-existing basement rocks and Jeju volcanic rocks, which were subsequently affected by diagenesis, hydrothermal alteration and weathering process.

• Journal of the Korean earth science society
• /
• v.40 no.2
• /
• pp.163-176
• /
• 2019

The Potosinian geological basement in central Mexico is comprised of the Upper Paleozoic metamorphic rocks, which crop out on the Sierra de Catorce nucleus located in the northeastern part of the state. The sedimentary sequence that covers unconformably the Paelozoic basement is represented by an Upper Triassic marine sedimentary sequence, correlating to the Zacatecas Formation and the Upper Triassic continental Huizachal Formation red beds, which in turn are covered either by La Joja Formation Jurassic red beds or by Upper Jurassic marine sediments. This sequence is overlain by the conformable Cretaceous calcareous marine sedimentary rocks in all the state of San Luis Potosi. The Cenozoic sequence unconformably covers some of the aforementioned rocks and is represented by undifferentiated volcanic rocks as well as by marine clastic rocks. The existing intrusive igneous rocks are felsic to intermediate composition, and they intrude the metamorphic basement and sedimentary rocks. Conglomerates with evaporitic sediments were deposited during the Pleistocene. The Quaternary sequence includes basalt flows, piedmont deposits, alluvium, and occasionally evaporites and caliche layers. In the state of San Luis Potosi, a great diversity of mineral deposit types is known as both metallic and nonmetallic. The host rocks of these deposits vary from one another including formations that represent from Paleozoic up to Tertiary. The mineralization age corresponds approximately to Tertiary (75%), and is mainly epigenetic. Conclusively, the data on geology and mineralization in San Luis Potosi, Mexico are helpful to predict a hidden ore body and select promising mineralized zone(s) when the domestic company makes inroads in the mining sector of Mexico.

• Economic and Environmental Geology
• /
• v.57 no.2
• /
• pp.205-217
• /
• 2024

This study evaluated the physical characteristics and quality of volcanic rocks distributed in the Jeju Island-Ulleung Island area as aggregate resources. The main rocks in the Jeju Island area include conglomerate, volcanic rock, and volcanic rock. Conglomerate is composed of yellow-red or gray heterogeneous sedimentary rock, conglomerate, and encapsulated conglomerate in a state between lavas. Volcanic rocks are classified according to their chemical composition into basalt, trachybasalt, basaltic trachytic andesite, trachytic andesite, and trachyte. By stratigraphy, from bottom to top, Seogwipo Formation, trachyte andesite, trachybasalt (I), basalt (I), trachybasalt (II), basalt (II), trachybasalt (III, IV), trachyte, trachybasalt (V, VI), basalt (III), and trachybasalt (VII, VIII). The bedrock of the Ulleung Island is composed of basalt, trachyte, trachytic basalt, and trachytic andesite, and some phonolite and tuffaceous clastic volcanic sedimentary rock. Aggregate quality evaluation factors of these rocks included soundness, resistance to abrasion, absorption rate, absolute dry density and alkali aggregate reactivity. Most volcanic rock quality results in the study area were found to satisfy aggregate quality standards, and differences in physical properties and quality were observed depending on the area. Resistance to abrasion and absolute dry density have similar distribution ranges, but Ulleung Island showed better soundness and Jeju Island showed better absorption rate. Overall, Jeju Island showed better quality as aggregate. In addition, the alkaline aggregate reactivity test results showed that harmless aggregates existed in both area, but Ulleungdo volcanic rock was found to be more advantageous than Jeju Island volcanic rock. Aggregate quality testing is typically performed simply for each gravel, but even similar rocks can vary depending on their geological origin and mineral composition. Therefore, when evaluating and analyzing aggregate resources, it will be possible to use them more efficiently if the petrological-mineralological research is performed together.

• Economic and Environmental Geology
• /
• v.31 no.4
• /
• pp.325-338
• /
• 1998

105 oriented samples (19 matrix samples, 86 cobble samples) were collected from the Silla Coglomerate Formation in Jinju and Goryeong areas to clarify the regional remagnetization of Cretaceous Kyongsang supergroup. Both the alternating field and thermal demagnetizations were conducted for the collected samples. The characteristic remanent magnetizations of these samples divided into three types in the Silla Conglomerate Formation: The ingredient magnetic minerals are magnetite, hematite, or both magnetite and hematite in a specimen. The characteristic remanent directions of cobble samples did not clustered to any direction. And the characteristic remanent directions of interbedded sandstones in the Silla Conglomerate Formation is $D/I=20.6^{\circ}/54.5^{\circ}$ (${\alpha}_{95}=11.1^{\circ}$, k=48.8) after tilting correction, agree with previous paleomagnetic studies on the Hayang group. These results implied that conglomerate test was passed indicating no regional remagnetization in the studied area after deposition of the Silla Conglomerate Formation.