• 한국컴퓨터정보학회논문지
• /
• 제27권10호
• /
• pp.163-173
• /
• 2022

본 연구에서는 요실금 발생빈도가 높아지는 40대, 50대, 60대 여성을 대상으로 하여 하반신 몸통 체형을 유형화하고 그 특징을 알아보고자 한다. 또, 연령대별 하반신 몸통 체형을 분류해봄으로써 요실금 팬티 패턴 개발에 필요한 기초자료를 얻고자 한다. 본 연구는 국가기술표준원 제8차 인체치수조사데이터 중 40-69세 여성 1543명을 대상으로 하여 하반신 몸통 관련 계측항목 총 29개를 분석하였다. 분석에는 SPSS 26.0 프로그램을 사용하였다. 하반신 몸통 높이 항목은 연령이 증가할수록 낮아지고, 너비 관련 항목은 연령이 증가할수록 넓어지며, 둘레 관련 항목은 허리둘레와 배둘레는 증가하고 엉덩이둘레는 작아지는 것으로 분석되었다. 몸통길이는 연령이 증가할수록 감소하였다. 하반신 몸통 구성 요인은 하반신 몸통 수평 요인, 높이 요인, 하부 요인, 수직 요인으로 분류되었다. 하반신 몸통 유형은 긴 역삼각 체형, 짧고 높은 몸통 체형, 몸통 비만 체형, 낮은 삼각 체형으로 분류되었다. 하반신 몸통 수평 요인과 높이 요인은 유형 3이 가장 크고, 하반신 몸통 수직 요인과 하부 요인은 유형 1이 가장 큰 것으로 분석되었다. 하반신 몸통은 허리와 복부가 발달된 유형과 엉덩이, 넙다리가 발달된 유형으로 분류되어 요실금 팬티의 가로 부위 설정 시 체형 차이의 반영이 요구되었다. 또, 몸통이 긴 유형과 짧은 유형으로 분류되어 앞중심과 뒷중심길이 차이를 반영할 수 있는 제도법이 필요하였다.

• 한국의류학회지
• /
• 제47권1호
• /
• pp.17-34
• /
• 2023

This study aimed to develop a fitted torso pattern with an improved fit for inverted-triangular males in their twenties. For this study, six torso patterns were collected, compared and evaluated, and a fitted torso pattern was developed using virtual fittings. The research results are as follows. First, the fitted torso pattern received a good rating as a result of the virtual fitting evaluation: waist dart set 2 of the front; the amount of comfort is set at 5 cm around the chest, 4 cm around the waist and 10 cm around the hips. Second, the evaluation of virtual fitting of the development pattern showed that fit evaluation was 4.11/5 points, ease evaluation was 6.53/7 points, and that the stress map and airgap were suitable for the human body. Third, the actual fit evaluation of the development pattern was 4.25/5 points, 6.35/7 points for ease evaluation, and 4.81/5 points for motion evaluation. Fourth, there was no significant difference between the results of the virtual and actual fitting evaluation with the objectivity test. It is therefore possible to apply a pattern developed through a virtual fitting to an actual human body and to confirm the objectivity of the pattern.

• 복식문화연구
• /
• 제12권3호
• /
• pp.415-428
• /
• 2004

The purpose of this thesis was to develop torso patterns according to the physical types of men in 20s. The procedure and results are as follows; 1. Of the men in 20s meeting the national average of physique, 4 men were selected and classified into 2 physical types according to their chest and waist circumference drops. One group had 20㎝ drop (Y type) while the other had 16㎝ drop (N type). Through evaluation performed by clothing construction professionals on the 4 upper bodice blocks drafted according to the existent drafting method and dressed on the 4 men, several problems have been found. These problems were adjusted and supplemented to make two new blocks. The fit of the new blocks were evaluated and proved to be satisfactory. 2. The following is the adjustments made to the existent men's torso patterns which had been utilized as the objects the first evaluation experiment. ① Though the back waist length of the pattern from the existent drafting method covered the center back length of the body in both Y type and N type, the front length did not causing it to stand away from the body. To adjust this, 2.0㎝ has been added to the center front length of each pattern so that the waist line could make a bar level to the ground. ② The shoulder line of the pattern from the existent drafting method had the tendency to fall backward. To make the shoulder line to fall in place, it has been moved 1.0㎝ to the front. 0.5㎝ has been added to the should length. ③ The neckline had a tendency to climb up. It has been lowered by 0.5㎝ until the line touched the center front neck point. ④ Though different in degree, the neck circumference did not allow enough width for both physique type causing the neckline to pull at side neck point with diagonal crease. To adjust this, 0.3㎝ and 0.6㎝ has been added to the Y type and N type respectively so that the neckline would touch the side neck point and the neckline could naturally fall into its original position. ⑤ Though different in degree, there was not enough space at the armhole causing wrinkles around this area. Therefore, 0.25㎝ and 0.5㎝ has been added to the front and back of the armholes of the Y and N types respectively. The armhole was made 1.0㎝ deeper only for the N type. ⑥ 1.0㎝ in the front and 0.5㎝ in the back were added to the side scam for the Y type while 0.5㎝ in the front and 0.25㎝ in the back were added for N type. This eliminated the unwanted wrinkles to give the silhouette a smooth look.