• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.6
• /
• pp.523-530
• /
• 2017

In this study, a method of probabilistic evaluation of the performance point of the structure obtained by capacity spectrum method (CSM) is presented. The performance point of the 4-story and 1-bay steel structure was determined by using CSM according to ATC-40. In order to analyze whether the demand spectrums exceed the performance limit of the structure, the limit displacements are derived for the performance limit of the structure defined from the plastic deformation angle of the structural member. In addition, by selecting a total of 30 artificial seismic wave having the response spectrum similar to the design response spectrum, the fragility curves were derived by examining whether the response spectrum obtained from the artificial seismic wave were exceeded each performance limit according to the spectral acceleration. The maximum likelihood method was used to derive the fragility curve using observed excess probabilities. It has been confirmed that there exists a probability that the response acceleration value of the design response spectrum corresponding to each performance limit exceeds the performance limit. This method has a merit that the stochastic evaluation can be performed considering the uncertainty of the seismic waves with respect to the performance point of the structure, and the analysis time can be shortened because the incremental dynamic analysis (IDA) is not necessary.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.07a
• /
• pp.423-424
• /
• 2021

본 연구는 성인학습자를 대상으로 효과적인 비대면 수업방법에 대한 개선점을 모색하여 교수자의 수업역량 향상에 기초자료를 제공하고자 하였다. 이를 위해 PBL(문제중심수업) 교수법을 기초로 4주차 수업을 설계하고 웹엑스(Webex)를 활용한 교수법을 49명의 학생에게 적용하였다. 연구 결과는 다음과 같다. 첫째, 고연령 성인학습자를 대상으로 디지털기기 활용법에 대한 사전 숙지가 필요하며, 둘째, 팀활동을 위한 웹엑스 세션별 수업은 강의실 수업에서 수동적인 학생들의 적극적인 수업참여를 이끌었고, 셋째, PBL(문제중심수업) 수업 방식은 비대면 수업에서도 학생주도의 수업을 이끌어 내고 활발한 상호작용을 통해 학생들의 문제 해결과 실천역량을 향상시킬 수 있었다. 이러한 연구 결과는 성인학습자를 대상으로 한 교수자의 비대면 수업 교수법에 기초적인 자료가 될 것이다.

• Journal of Digital Convergence
• /
• v.10 no.1
• /
• pp.253-270
• /
• 2012

In a rapidly changing IT and business management environment the demand for competent IS personnels is increasing. However, it is ironic that the number of IT and IS majors has sharply decreased as well as the widespread skepticism of IS identity. This research suggests directions to differentiate MIS to other IT majors, diversify IS core competency and make general improvements in MIS curriculum. The research recommend the courses of IS Strategy and policy, ITA/EA, Global IT Management, Emerging Technologies, DW/DM, BI, IT Service Science, Project Management, IT Consulting and integrated capstone which are few in Kore universities. This research also stress the course of soft skills like business communication, team building, analytic/logical thinking, rational problem solving and so on as a important IS competency. The pedagogy of course is important, so the research recommend the internship, mentoring programme, lecturers in industry according to industrial - educational cooperation.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1997.10a
• /
• pp.209-216
• /
• 1997

The seismic performance of R/C frame structure designed for gravity load investigated in this paper. The investigation shows a satisfactory seismic performance against moderate earthquakes but column sway failure mechanism against severe earthquakes. Capacity design method is employed to redesign the R/C frame to improve seismic performance. This study provides an insight an insight into seismic upgrading methodology for medium rise R/C frame structures designed gravity load.

• The Journal of the Korea Contents Association
• /
• v.18 no.9
• /
• pp.248-259
• /
• 2018

The purpose of this study was to analyze the pre-service teachers' perception for education paradigm and teacher's teaching competency in the fourth industrial revolution era. For this study 53 pre-service teachers participated in the discussion instruction during one semester. The study result was to analyze the discussion reports of pre-service students using the grounded theory approach. As a result, the pre-service students responded that the school needs to change the learner-centered education and assessment method in the fourth industrial revolution era. Secondly, the result of the teachers' teaching competencies was the integrated curriculum reconstruction, information processing, empathy and understanding, creative teaching and instructional design, collaboration and communication. This study is expected to contribute to the change of education paradigm for pre-service teachers in the fourth industrial revolution era.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4A
• /
• pp.659-675
• /
• 2006

Recently, significant progress has been made in performance-based engineering methods that rely mainly on nonlinear static seismic analysis procedures. The Capacity Spectrum Method (CSM) and the Displacement Coefficient Method (DCM) are the representative nonlinear static seismic analysis procedures. In order to evaluate the applicability of the procedures to the seismic evaluation and design process of new and existing structures, the accuracy of both CSM and DCM should be evaluated in advance. The accuracy of seismic responses by the nonlinear static procedures is evaluated in comparison with the shaking table test results for the structural wall specimen subjected to the far field and near field earthquakes. Also conducted are comparative studies where the shaking table test results are compared with those from nonlinear dynamic analysis procedures, i.e., Single-Degree-of-Freedom (SDOF), equivalent SDOF and Multi-Degree-of-Freedom (MDOF) systems.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.10a
• /
• pp.547-549
• /
• 2018

대부분의 기업이나 기관에서 애플리케이션 설계와 구축 시 기술적 역량이나 업무 경험을 필요로 한다. 구체적인 기준이나 절차적으로 표현할 수 있는 표기법이 부족하여 경험이 없는 경우 프로세스를 설계하기가 어렵다. 본 연구에서는 체계적인 업무 프로세스 설계 방법을 제시 후 화면 설계로의 변환 과정을 형식 언어로 표현하는 방법을 제시하고자 한다. 본 연구의 결과르 인해 비경험자도 업무 프로세스 설계가 가능할 것이며 화면 설계로의 변환 시 좀 더 시각화 되어 효율적인 개발이 이루어지고, 클래스 설계와 뷰 설계 시에도 효과적으로 사용할 수 있을 것으로 기대한다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.2
• /
• pp.169-187
• /
• 2008

Performance-based approaches as an alternative method of the existing force-based approach have gradually become recognized tools for the seismic design and evaluation. The maximum inelastic displacement response using capacity spectrum method (CSM) with elastic response spectrum is estimated from seismic response of equivalent linear system converted from nonlinear system. The purpose of this paper is to evaluate accuracy of capacity spectrum method using the equivalent SDOF methods of 4 types and the equivalent damping methods of 5 types for RC wall structure. In order to evaluate accuracy of capacity spectrum analysis, the shaking table test results for RC wall structures are compared with those by the capacity spectrum analysis. Also, the effect of bilinear capacity curves by two bilinear approximation methods for capacity spectrum analysis is compared.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2541-2549
• /
• 2013

The Construction industry has been dealing with much trouble due to global economic recession and domestic political trends emphasizing on welfare than development. Consequently, domestic construction market has been dramatically shrunk during the last a few years, and international market has become the only potential solution for the industry. However, there has been lack of efforts in developing a quantified measure of global competencies for Korean engineering and construction organizations. This study attempted to develop quantified indices for Korean engineering and construction contractors with which the level of global construction competencies can be objectively monitored. In doing so, a survey questionnaire was developed to identify relative importances of core competency elements which were derived from extensive literature reviews and experts interviews. AHP (Analytic Hierarchy Process) was employed as a main analysis method in developing quantification measures. The analysis results reveal little differences in competency requirements between engineering and construction firms and it implies that the global market becomes more integrated and requires a total solution for a construction project. The developed core competency measures can be used to quantify the level of preparedness of Korean engineering and construction firms at the time of evaluation and also be used as a basis for performance benchmarking indicators if they are compared with business showings.

• 한국경영정보학회:학술대회논문집
• /
• 2008.06a
• /
• pp.1096-1103
• /
• 2008

2002년 소비자 보호 및 기업의 제품 역량 강화를 위해 대두된 제조물 책임법으로 제품에 대한 소비자의 관심이 증대되고 제품 결함에 대한 기업의 책임이 강화되고 있다. 본 연구에서는 전기 전자 산업에서 제조물 결함에 의해 나타나는 기업 및 소비자의 손해 배상에 대한 분석과 제품 흐름별 PL법 사례를 제시한다. 또한, 신속한 기업 PL 예방과 대응을 위한 RFID 적용 전, 후 PL법 대응 프로세스 분석을 통해 RFID 적용 PL법 대응 방향을 제시한다. 더불어, PL법 대응 시스템 설계 시 접근 방향과 제품 라이프 사이클에서 제시되는 데이터 흐름 및 상세적용 정보를 제시하여 효과적인 PL법 대응 프로세스 구축 방향을 제시하고, 전기 전자 산업 사례 적용을 통하여 전기 전자 산업의 PL법 대응 프로세스 및 핵심 정보를 제시하고자 한다.