• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.5
• /
• pp.424-429
• /
• 2016

This paper presents dual-mode ring-resonator bandpass filter using LUC of artificial-transmission-lines. The conventional ring-resonator bandpass filter has limitation in miniaturization because the conventional ring-resonator is based on a one wavelength operation, and problem due to undesire harmonics. The ring-resonator bandpass filter is miniaturized and show higher order mode rejection by configuring a ring-resonator with LUC of artificial-transmission-lines. The two-stage bandpass filter is designed and fabricated with a ring-resonator and input/output interdigital coupled line. A fabricated filter shows dual-mode, rejection of whole ultra wide band, sharp skirt characteristics and has ring area reduced by 60 % compared to the conventional ring-resonator bandpass filter.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.2
• /
• pp.178-182
• /
• 2004

In this paper, a 90$^{\circ}$ hybrid coupler with both power division and harmonic rejection characteristics is presented by applying a LPF characteristic to a conventional 90$^{\circ}$ hybrid. Since a conventional 90$^{\circ}$ hybrid coupler operates as a power divider/combiner using phase difference, it does not suppress higher order harmonics when it is incorporated with nonlinear amplifier. This requires an additional filter to take into account of the harmonics. The proposed 90$^{\circ}$hybrid coupler power provides the division capability and proper phase difference, as well as harmonic suppression characteristic by integrating LPF characteristic.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.93
• /
• pp.154-160
• /
• 2005

Microwave Otters are essential device in modem wireless systems. A compact dimension BPF(Band-pass Filter) for IEEE 802.11a WLAN service is realized using LTCC multi-layer process. To extrude 2-stage band-pass equivalent circuit, band-pass and J-inverter transform applied to Chebyshev low-pass prototype filter. Because parallel L-C resonator is complicate and hard to control the inductor characteristics in high frequency, the shorted $\lambda/4$ stripline is selected for the resonator structure. The passive element is located in the different layers connected by conventional via structure and isolated by inner GND. The dimension of fabricated stacked band-pass filter which is composed of six layers, is $2.51\times2.27\times1.02\;mm^3$. The measured filter characteristics show the insertion loss of -2.25 dB, half-power bandwidth of 220 MHz, attenuation at 5.7 GHz of -32.25 dB and group delay of 0.9 ns at 5.25 GHz.

• The Journal of the Acoustical Society of Korea
• /
• v.7 no.4
• /
• pp.31-53
• /
• 1988

In this work we study extensively the structures and performance characteristics of the block least mean-square (BLMS) adaptive digital filters (ADF's) that can be realized efficiently using the fast Fourier transform (FFT). The weights of a BLMS ADF realized using the FFT can be adjusted either in the time domain or in the frequency domain, leading to the time-domain BLMS(TBLMS) algorithm or the frequency-domain BLMS (FBLMS) algorithm, respectively. In Part Ⅰof the paper, we first present new results on the overlap-add realization and the number-theoretic transform realization of the FBLMS ADF's. Then, we study how we can incorporate the concept of different frequency-weighting on the error signals and the self-orthogonalization of weight adjustment in the FBLMS ADF's , and also in the TBLMS ADF's. As a result, we show that the TBLMS ADF can also be made to have the same fast convergence speed as that of the self-orthogonalizing FBLMS ADF. Next, based on the properties of the sectioning operations in weight adjustment, we discuss unconstrained FBLMS algorithms that can reduce two FFT operations both for the overlap-save and overlap-add realizations. Finally, we investigate by computer simulation the effects of different parameter values and different algorithms on the convergence behaviors of the FBLMS and TBLMS ADF's. In Part Ⅱ of the paper, we will analyze the convergence characteristics of the TBLMS and FBLMS ADF's.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.245-251
• /
• 2011

In this paper, dual-band bandpass filter by using Pseudo-Interdigital Stepped-Impedance Resonator(PI-SIR) and Open-Loop Ring Resonator(OLRR) is proposed. The first passband and second passband are formed by PI-SIR and the second passband is reinforced by an OLRR. In a PI-SIR the first band and second band are easily and exactly adjusted by characteristic impedance ratio and electrical length ratio. The proposed design method may be confirmed to be useful from fabricated and measured results for dual-band bandpass filter operated at 2.45 GHz and 5.8 GHz.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.689-692
• /
• 2003

본 논문에서는 개방된 양 끝이 Loading 캐패시턴스로 연결된 새로운 행태의 1/2 파장 공진기를 이용해서 3단 대역통과 여파기를 설계, 제작하였다. 제안한 공진기의 전파지연효과(Slow-Wave Effect)때문에, 넓은 상향저지대역을 갖으며, 사이즈(Size)가 축소된 협대역 여파기 설계가 가능하다. 설계한 대역통과 여파기는 미세라인 구현이 가능한 후막 리소그라피 공정 기술을 이용하여 제작하였다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.347-351
• /
• 2002

본 논문에서는, 위성 중계기 Engineering Model(EM)급 Ka 대역 입력 Demultiplexer (IMUX)의 진폭 및 군지연 등화된 채널 협대역 여파기의 개발/결과가 제시된다. 여파기는 큰 선택성(selectivity)과 작은 대역내 손실로써 동작하기 위해, 8차의 타원적분형 응답특성의 이중모드 결합구조의 특성을 가진다. 그리고 여파기 출력이 가지는 급한 변화의 군지연과 대역내 진폭은 2극(Pole) 등화기에 의해 평탄하게 된다. 튜닝 및 측정 결과는 요구규격사항을 잘 만족함을 보여준다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.9
• /
• pp.60-65
• /
• 2009

In this paper, we present a compact Ultra-Wideband band-pass later with notched band at fireless-LAN band using a band-pass and band-notch filter. The structure of our proposed band-pass filter is very simple, and the DGS(Defected Ground Structure) structure is used to get the low-pass filter characteristic, and an embedded open-stub structure is used to get the notched filter. Our proposed band-pass filter can be much smaller than a cascaded filter. As a result of measurement, the insertion loss is less than 0.7dB throughout the pass-band of $2.21GHz{\sim}10.92GHz$, the return loss is more than 17dB and the group delay maximum variation is 0.24ns and a notched band is at $5.3GHz{\sim}5.7GHz$.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.3
• /
• pp.2-17
• /
• 1999

Interpolated second order polynomials(ISOP's) are proposed to design efficient cascaded integrator-comb(CIC)-based decimation filters for a programmable downconverter. It is shown that some simple ISOP's can effectively reduce the passband droop caused by CIC filtering with little degradation in aliasing attenuation. In addition, ISOP's are shown to be useful for simplifying halfband filters that usually follow CIC filtering. As a result, a modified half band filter(MHBF) is introduced which is simpler than conventional halfband filters. The proposed decimation filter for a programmable downconverter is a cascade of a CIC filter, an ISOP, MHBF's and a programmable finite impulse response(FIR) filter. A procedure for designing the decimation filter is developed. In particular, an optimization technique that simultaneously designs the decimation filter is developed. In particular, an optimization technique that simultaneously designs the ISOP and programmable FIR filters is presented. Design examples demonstrate that the proposed method leads to more efficient programmable downconverters than existing ones.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.12
• /
• pp.11-20
• /
• 1999

We have designed and fabricated direct-and gap-coupled microstrip hairpin-comb filters by patterning double-sided YBCO films on a single 50-mm-diameter, 0.5-mm-thick $LaAlO_3$ wafer. Both filters have a center frequency at 1.773 GHz, 12 MHz bandwidth, 0.5 dB minimum insertion loss in the passband, and very strong out-of- band rejection. Due to two attenuation poles below and above the passband, the direct-coupled hairpin-comb filter showed a better skirt characteristic than the gapcoupled hairpin-comb filter which had only one attenuation pole below the passband.