• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1613-1616
• /
• 2007

A microgripper using thermal actuator and SU-8 polymer was designed and fabricated to manipulate cells and microparts. A chip size of a microgripper was 3 mm ${\times}$ 5 mm. The thermally actuated microgripper consisted of two couples of hot and cold arm actuators. The high thermal expansion coefficient, 52 $ppm/^{\circ}C$, of SU-8 compared to silicon and metals, allows the actuation of the microgripper. Thickness and width of SU-8 as an end-effector were 26 ${\mu}m$ and 80 ${\mu}m$, respectively. Initial gap between left jaw and right jaw was 120 ${\mu}m$. The ANSYS program as FEM tool was introduced to analyze the thermal distribution and displacement induced by thermal actuators. $XeF_2$ gas was used for isotropic silicon dry etching process to release SU-8 end-effector. Mechanical displacements of the fabricated microgripper were measured by optical microscopy in the range of input voltage from 0 V to 2.5 V. The maximum displacement between two jaws of a microgripper Type OG 1_1 was 22.4 ${\mu}m$ at 2.5 V.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.1
• /
• pp.15-24
• /
• 1996

This paper presents a new method for visual servoing to control the pose(position and orientation) of the robotic manipulators for grasping the 3-D moving object whose initial pose and moving informations are unknown by using the stereo camera. The stereo camera is mounted on the end-effector of robotic manipulator. In order to track the current pose of robotic manipulator to the desired pose, we use the image Jacobian, which is described by the differential transform, relating the change in image feature point to the change in the object's pose with respect to the camera. In this paper the simple PD controller is adopted for the robotic manipulator to track the desired pose. Finally, the effectiveness of the proposed method is confirmed by some computer simulations.

• Journal of Biosystems Engineering
• /
• v.29 no.3
• /
• pp.281-286
• /
• 2004

The end-effector is the one of the important factors on development of the cucumber robot to harvester a cucumber. Three end-effectors were designed the single blade end-effector with one blade, the double blade end-effector with two blades and the triple blade end-effector with three blades. Performance tests of the end-effector, the fully integrated system, were conducted to determine the cutting rate by using two different kinds of cucumber. The success rates of cucumber cutting ratio of single end-effector, double end-effector and triple end-effector in laboratory. were 61.7%, 95%, 86.7%, respectively. The cutting rate of single blade or double blade was a little difference with respect to the different diameters of cucumber stem. However, the success cutting rate of the end-effector with triple blade was 61.7% under 29mm diameter of a grabbing stem section. The triple end-effector was not suitable for harvesting a cucumber, but was considered to be suitable for harvesting a grape, an apple and a tomato. The success rate of cucumber cutting ratio of triple end-effectors in greenhouse was 84%. The failure cutting rate was 16% which are due to abnormal shape of cucumber fruit.

• Journal of the Korean Society of Physical Medicine
• /
• v.16 no.3
• /
• pp.123-130
• /
• 2021

PURPOSE: Robotic gait training is being used increasingly to improve the gross motor performance and gait speed. The present study examined the effectiveness of a novel end-effector type of robotic gait training (RGT) system on standing, walking, running, and jumping functions, as well as the gait speed in children with spastic cerebral palsy. METHODS: Eleven children with spastic cerebral palsy Gross Motor Function Classification System (GMFCS) levels I-III (6 males; age range, 15.09 ± 1.44 years) were examined. They underwent 24 sessions (30 minutes/sessions, one time/day, three days/week for eight consecutive weeks) of RGT. The Gross Motor Function Measure-88 D domain (GMFM D), and GMFM E were assessed with a pretest and posttest of RGT. The setting was a one-group pretest-posttest design. RESULTS: A comparison of the pre-test and post-test show that the outcomes in post-test of GMFM D (p < .01), GMFM E (p < .05), and 10MWT were improved significantly after RGT intervention. CONCLUSION: The present study provided the first evidence on the effects of an eight-weeks RGT intervention in participants with spastic CP. The outcomes of this clinical study showed that standing performance, locomotion function, and gait speed increased in after 24 sessions of the end-effector RGT system in children with spastic cerebral palsy.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.3
• /
• pp.206-212
• /
• 2015

This paper proposes the physical human-robot interaction method that controls the robot arms using ITO touch panel sensor as the skin of robot. To implement physical human-robot interaction, the method of using the force/torque sensor and the method of using tactile sensor created by arranging small element type of sensor have been studied. However, these sensors have the pros and cons in terms of price and performance. This study aims to demonstrate the economy of element type sensor and the accuracy of force/torque sensor through experiment by proposing the method of physical interaction using the touch panel as the skin of robot, and by constructing overall system. The experiment was carried out for the method of controlling the robot arm by installing end-effecter and the method of controlling robot arm by creating the gesture with reference point on the touch panel. Through this experiment, the possibility of teaching control using the touch panel was confirmed.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.6
• /
• pp.132-141
• /
• 2013

Robotic Drilling Systems(RDSs) set the standard for the factory automation systems in aerospace manufacturing. With the benefits of cost effective drilling and predictive maintenance, RDSs can provide greater flexibility in the manufacturing process. The system can be easily adopted to manage very complex and time-consuming processes, such as automated fastening hole drilling processes of large aircraft sections, where it would be difficult accomplished by workers following teaching or conventional guided methods. However, in order to build an RDS based on a CAD model, the precise calibration of the Tool Center Point(TCP) must be performed in order to define the relationships between the fastening-hole target and the End Effector(EEF). Based on the kinematics principle, the robot manipulator requires a new method to correct the 3D errors between the CAD model of the reference coordinate system and the actual measurements. The system can be called as a successful system if following conditions can be met; a. seamless integration of the industrial robot controller and the IO Level communication, b. performing pre-defined drilling procedures automatically. This study focuses on implementing a new technology called iGPS into the fastening-hole-drilling process, which is a critical process in aircraft manufacturing. The proposed system exhibits better than 100-micron 3D accuracy under the predefined working space. Based on the proposed EEF fastening-hole machining process, the corresponding processes and programs are developed, and its feasibility is studied.

• Journal of Internet Computing and Services
• /
• v.24 no.6
• /
• pp.23-29
• /
• 2023

As an effort to maximize the immersiveness of user experience in virtual reality, there have been constant efforts to provide a user with tactile sensation by providing haptic feedback. Most of the haptic feedback methods, however, can create only limited or unrealistic haptic sensations since they utilize affordable actuators such as a vibrotactile actuator. When it comes to martial arts training or a game, the limitation of such haptic feedback is apparent due to the significant difference between the physical impact of hitting an object and the sensation departed from a vibrotactile actuator. Noting this, we proposed a haptic impact system that can create a haptic impact when the user hits a virtual object with the fist. The haptic interface uses a quick-return mechanism that can deliver haptic impact feedback to a user's fist. The realism of the haptic impact was evaluated by conducting a human-subject experiment. The results indicate a significant effect of haptic feedback on the realism of the virtual impact.

• Journal of Bio-Environment Control
• /
• v.24 no.3
• /
• pp.210-216
• /
• 2015

Purpose of this study was a development of an image processing algorithm to recognize paprika and acquire it's 3D coordinates from stereo images to precisely control an end-effector of a paprika auto harvester. First, H and S threshold was set using HSI histogram analyze for extracting ROI(region of interest) from raw paprika cultivation images. Next, fundamental matrix of a stereo camera system was calculated to process matching between extracted ROI of corresponding images. Epipolar lines were acquired using F matrix, and $11{\times}11$ mask was used to compare pixels on the line. Distance between extracted corresponding points were calibrated using 3D coordinates of a calibration board. Non linear regression analyze was used to prove relation between each pixel disparity of corresponding points and depth(Z). Finally, the program could calculate horizontal(X), vertical(Y) directional coordinates using stereo camera's geometry. Horizontal directional coordinate's average error was 5.3mm, vertical was 18.8mm, depth was 5.4mm. Most of the error was occurred at 400~450mm of depth and distorted regions of image.

• Journal of Korean Society of Forest Science
• /
• v.111 no.2
• /
• pp.287-301
• /
• 2022

This study aims to propose a crane-tip control method to intuitively control the end-effector vertically or horizontally for improving the crane work efficiency and to confirm the control performance. To verify the control performance based on experimental variables, a laboratory-scale crane was manufactured using an electric cylinder. Through a forward and reverse kinematics analysis, the crane was configured to output the position coordinates of the current crane-tip and the joint angle at each target point. Furthermore, a method of generating waypoints was used, and a dead band using lateral boundary offset (LBO) was set. Appropriate parameters were selected using bang-bang control, which confirmed that the number of waypoints and LBO radius were associated with positioning error, and the cylinder speed was related to the lead time. With increased number of waypoints and decreased LBO radius, the positioning error and the lead time also decreased as the cylinder speed decreased. Using the proportional control, when the cylinder velocity was changed at every control cycle, the lead time was greatly reduced; however, the actual control pattern was controlled by repeating over and undershoot in a large range. Therefore, proportional control was performed by additionally applying velocity gain that can relatively change the speed of each cylinder. Since the control performed with in a range of 10 mm, it was verified th at th e crane-tip control can be ach ieved with only th e proportional control to which the velocity gain was applied in a control cycle of 20 ms.

• Journal of the Korea Computer Graphics Society
• /
• v.29 no.5
• /
• pp.11-20
• /
• 2023

In this paper, we propose a novel deep learning-based motion reconstruction approach that facilitates the generation of full-body motions, including finger motions, while also enabling the online adjustment of motion generation delays. The proposed method combines the Vive Tracker with a deep learning method to achieve more accurate motion reconstruction while effectively mitigating foot skating issues through the use of an Inverse Kinematics (IK) solver. The proposed method utilizes a trained AutoEncoder to reconstruct character body motions using tracker data in real-time while offering the flexibility to adjust motion generation delays as needed. To generate hand motions suitable for the reconstructed body motion, we employ a Fully Connected Network (FCN). By combining the reconstructed body motion from the AutoEncoder with the hand motions generated by the FCN, we can generate full-body motions of characters that include hand movements. In order to alleviate foot skating issues in motions generated by deep learning-based methods, we use an IK solver. By setting the trackers located near the character's feet as end-effectors for the IK solver, our method precisely controls and corrects the character's foot movements, thereby enhancing the overall accuracy of the generated motions. Through experiments, we validate the accuracy of motion generation in the proposed deep learning-based motion reconstruction scheme, as well as the ability to adjust latency based on user input. Additionally, we assess the correction performance by comparing motions with the IK solver applied to those without it, focusing particularly on how it addresses the foot skating issue in the generated full-body motions.