• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.128-128
• /
• 2017

무전해 도금이란 외부의 전원을 사용하지 않고 환원제를 이용하여 금속 피막을 석출시키는 방법이다. 이러한 무전해 도금은 최근에 와서 인쇄회로기판(printed circuit board)등 다양한 전자부품에 적용되고 있다. 최근 급격한 금 가격 상승으로 인해 전자부품용에 사용되는 금의 사용량을 감소시키거나 또는 금을 대체할 수 있는 도금 층에 관한 연구가 활발하게 진행되고 있다. 금을 대체할 수 있는 즉 비용 경감의 가능성이 있는 도금 재료로는 팔라듐이 유력하다. 팔라듐은 금의 약 1/2가격으로 우수한 내식성 및 낮은 접촉저항을 가지기 때문에 접점재료로서 오래전부터 사용되어져왔다. 무전해 팔라듐-인 도금의 착화제, 환원제, 경도, 접촉저항에 대한 연구는 많이 있지만 도금속도에 미치는 인자에 대해서는 명확하지 않은 것이 많다. 따라서 본 연구는 무전해 팔라듐-인 도금의 석출석도에 미치는 에틸렌디아민 농도의 영향에 대하여 조사하였다. 실험방법으로는 환원제로 차아인산을 사용하고 착화제로는 에틸렌디아민을 사용하여 문전해 팔라듐-인 도금액을 제조하였다. 에틸렌디아민의 농도는 각각 5ml/L, 7.5ml/L, 10ml/L, 12ml/L로 하였다. pH는 7.5, 온도는 $45^{\circ}C$로 하여 30분 동안 도금을 실시하였다. 무전해 팔라듐-인 도금속도는 정밀저울로 무게를 측정하였고 ICP-OES을 사용하여 도금층의 농도를 분석, XRF를 사용하여 성분분석과 XRD를 사용해 결정회절을 분석하였다. 또한 SEM을 사용하여 단면 관찰을 하였으며 석출속도에 미치는 에틸렌디아민의 영향을 전기화학 분극곡선을 통해서 고찰을 시도해 보았다.

• Journal of the Korean Chemical Society
• /
• v.40 no.5
• /
• pp.302-307
• /
• 1996

Diethanolamine dithiocarbamate is known to react with dichlorobis(ethylenediamine)cohalt(Ⅲ) chloride to form [Co(dtc)3](dtc=diethanolamine dithiocarbamate) in which two sulfur atoms of the dithiocarbamate are bound to cobalt. The complex is moderately soluble in acetone, but sparingly soluble in carbon disulfide. Kinetics and mechanisms of the reaction of dichlorobis(ethylenediamine)cobalt(Ⅲ) chloride with diethanolamine dithiocarbamate have been studied in aqueous solution. Activation parameters have been calculated from the kinetic data for the reaction and from these results a possible mechanism for the reaction has been proposed.

• Journal of the Korean Chemical Society
• /
• v.20 no.3
• /
• pp.206-211
• /
• 1976

Equilibria equations, applicable to solvent of low dieletric constant, were derived for potentiometric neutralization titration. Effects of salt and solvent were studied in potentiometric neutralization titration using ethylenediamine as solvent. Good agreement was observed between theory and experimental results.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.190-190
• /
• 2015

본 연구는 에틸렌디아민을 착체욕에서 팔라듐-니켈 합금도금을 형성하였다. 그리고 전류밀도 $1.0{\sim}20A/dm^2$ 변화를 통해 도금층 내의 니켈함량을 10.4 ~ 27.7 wt% 변화시켰다. 이를 통해 팔라듐-니켈 합금도금의 경도, 접촉저항, 표면 및 단면 조직에 미치는 도금층 내의 니켈함량의 영향에 대하여 조사하였다.

• Journal of the Korean Chemical Society
• /
• v.17 no.4
• /
• pp.229-234
• /
• 1973

The dependence of ionic activity and electrode potential upon electrolyte concentration in ethylenediamine includes the effects of ion-pair formation involving all possible combinations of cations and anions represent in the solution and includes the ion-atmosphere effects of dissociated ions. For calculating activity coefficients, Debye-Huckel limiting law, extended Debye-Huckel,equation, and Marshall Grunwald equation were used in comparison of experimental and calculated plots of the electromotive force of the cell versus the logarithum of concentration. The fit of the experimental points to the theoretical curves was improved in case of the Marshall-Grunwald equation.

• Journal of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.534-541
• /
• 1987

The study of reaction mechanism for the substitution of ethylenediamine (en) for Cl and Hedta from $[CoCl(Hedta)]^-$ in the presence of $Hg^{2+}$ ion was carried out by uv and CD spectra. From the kinetic data, we proposed that the first ethylenediamine be substituted through the associative reaction path by means of interaction of $Hg^{2+}$ ion with Co(III), and that the second and the third ethylenediamine be substituted stepwise. From the optical purities of $[Co(en)_3]^{3+}$ which was formed after reaction, we suggested the critical stereochemical step and new substitution reaction paths.

• Journal of the Korean Chemical Society
• /
• v.29 no.6
• /
• pp.629-636
• /
• 1985

The rates of solvolysis of trans-$[Co(AA)_2Cl_2]^+$ in which AA indicates ethylenediamine(en), N-ethylethylenediamine (N-eten), N-methylethylenediamino (N-meen) and trimethylenediamine(tn) respectively have been investigated using conductometric and spectrophotometric methods at various pressure up to 2,000 bar in acetone-water mixture. The activation volumes (${\Delta}V^{\neq}) obtained from the pressure effect on rate constants were -0.2∼0.9 $cm^3mole^{-1}$ for en, -0.2∼0.6 $cm^3mole^{-1}$ for N-eten, -0.8∼6.0 $cm^3mole^{-1}$ for N-meen and 0.7∼7.0$cm^3mole^{-1}$ for tn. The rates of solvolysis of these complexes were analyzed by comparing with the results obtained from excess free energy ($G^E$) and free energy cycle. It was found that $S_N1$ character was increased with decreasing the pressure and increasing the content of acetone in the mixture solvent. In addition to that, the effect of charge separation on the mechanism of solvolysis was discussed.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.5
• /
• pp.564-570
• /
• 2007

This study investigated the treatment of liquid waste containing highly concentrated iron(III)-ethylenediaminetetraaceticacid (Fe(III)-EDTA) of 70,000 mg/L by an underwater electrical discharge process using low voltage and high current. When AC voltage is applied to the discharging electrode with the other electrode grounded, the temperature of the liquid waste around the discharging electrode rapidly increases, and at the same time, hydrogen and oxygen gases are formed at the electrode as a result of electrochemical reactions. Ultimately, gases formed by vaporization of water and electrochemical reactions cover the electrode. Since the liquid waste is electrically conductive, it elongates the ground electrode up to the border of the gas layer, where electrical discharge occurs. Without hydrogen peroxide, electrical discharge was able to remove about 50% of Fe(III)-EDTA. As the concentration of hydrogen peroxide added increased, the removal efficiency of Fe(III)-EDTA increased. When the molar ratio of hydrogen peroxide to the initial Fe(III)-EDTA was higher than 24.7, more than 80 g of Fe(III)-EDTA was removed with an energy of 1 kWh. A comparison between tungsten and steel electrodes showed that electrode material did not affect the Fe(III)-EDTA removal. In the present underwater electrical discharge process, the removal of Fe(III)-EDTA was completed within 30 min at molar ratios of hydrogen peroxide to the initial Fe(III)-EDTA higher than 24.7.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.267-267
• /
• 2015

본 연구에서는 에틸렌디아민을 착화제로 사용하여 전해도금으로 Ni-Pd 합금피막을 형성하였다. 염화팔라듐 농도 1~5 mM, 전류밀도 $0.2{\sim}1.5A/dm^2$ 구간에서 고용체 합금피막이 형성되었으며, 이의 격자상수는 X선회절 분석을 통하여 확인하였다. Pd 함량은 전류밀도가 증가할수록 감소하였고, 경도는 전류밀도가 증가할수록 증가하다가 전류밀도 $1.3A/dm^2$ 이후 급격히 감소하였다. 경도증가 원인은 결정립미세화이고, 전류밀도 $1.3A/dm^2$ 이후에서 잔류응력으로 인한 크랙 발생으로 사료되었다.

• Journal of the Korean Chemical Society
• /
• v.14 no.1
• /
• pp.13-18
• /
• 1970

非水溶液 Ethylenediamine 中에서 水銀電極의 標準電位 및 水銀鹽化物, $HgCl_2,\;HgBr_2,\;HgI_2$의 Ion-Pair 形成恒數를, Hg電極/$HgX_2$ 또는 $HgX_2$+NaX//亞鉛아마르감 參照電極과 같은 Cell의 構成으로서 電位差法에 依하여 測定하였다.