• Proceedings of the KIEE Conference
• /
• 2006.10d
• /
• pp.110-112
• /
• 2006

본 연구는 소형, 고효율 3kW급 고분자 전해질 연료공급 모듈용 에어블로워 개발에 있어 필수요소인 BLDC형 블로워 모터에 관한 것이다. 에어블로워의 목표출력(50W)에 최적화된 BLDC모터를 설계하기위하여 등가자기회로법과 유한요소법을 이용하였고, 모터를 제작하여 해석결과와 비교 검증하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.572-578
• /
• 2011

The vane type air-motor hand-piece is used widely in the dental services. There are a lot of experimental studies about air-motor but eccentrically off not many numerical studies by using Computational Fluid Dynamics. An air-motor has rotor which rotates at the center of inner housing. The retractable vanes are installed on the rotor. As the rotor of the air-motor rotates, vanes move up and down straightly in the radial direction along the guide. Therefore we have to analyze the unsteady flow field by accurate time dependent marching technique. ANSYS 12.0 CFX is used to analyze unsteady vane-motor flow field Analysis of the changing control volume inside air-motor is implemented by user-defined functions and moving mesh options. Rotational speed of the rotor is approximately 23,000rpm.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.529-534
• /
• 2011

The air-motor unit of the hand-piece had not been developed inside of the country yet. Therefore it needs some research works. The objective of this study is to investigate the effect of the many mini holes at the outle of the air-motort. The flow fields analysis has been conducted by the immersed solid method using ANSYS 12.0 CFX.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.277-282
• /
• 2010

Imported vane type air motor and-piece is used widely in the domestic dental services. The imported hand-pieces are more than 90 percent in the domestic market. The air-motor unit of the hand-piece had not been developed inside of the country yet. Therefore it needs some research works. Purpose of this study is to design the air motor of the hand-piece for better performance. The geometry of the air-motor is based on product of NSK Company. The airflow of the air motor unit is simulated by Computational Fluid Dynamics. The performance analysis of the air motor units is investigated. ANSYS 12.0 CFX is used to analysis of the flowfield. Torque changes depends on spin calculated by the immersed solid method.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.05a
• /
• pp.185-186
• /
• 2018

에어보트(Air boat)는, 판옥선처럼 선체 밑바닥이 편평한 형태로 되어있어 물위는 물론 일반 선박이 갈 수 없는 얕은 수면, 개펄, 빙상, 늪지수풀 위를 달릴 수 있는 모터보트의 한 종류이다. 선체상부 뒤쪽에 장착된 로터의 회전에 의한 풍력으로 추진되며, 로터 바로 뒤에 방향키가 있다. 선체 재질로는 스틸, FRP가 주로 사용되고 있으며 최근 알루미늄, 탄소섬유의 적용이 늘어나고 있다. 수상크루징, 낚시, 스쿠버 등에 활용되며, 선저의 독특한 형상으로 인해 군사용, 인명구조용, 수산물수송용 등으로도 사용된다. 이 연구에서는 12인승 비미니탑 에어보트를 설계, 제작하고 해상 시운전을 실시하였다. 또한 소음저감을 위해 머플러를 설계 제작하고, 35노트에서 75~78dB 수준으로 성능을 검증하였다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.326-333
• /
• 2004

This paper presents the structural characteristics analysis of a high-speed horizontal machining center with spindle speed of 50, 000rpm and feedrate of 120m/min. The spindle system is designed based on the built-in motor, angular contact ceramic ball bearings, oil-air lubrication and oil-jacket cooling method. The X-axis and Y-axis feeding systems are composed of the linear motor and linear motion guides, and the Z-axis feeding system is composed of the servo-motor, ball screw and linear motion guide. The structural analysis model of the high-speed horizontal machining center is constructed by the finite element method, and the validity of structural design is estimated based on the structural deformation of the high-speed horizontal machining center and spindle nose caused by the gravity and inertia forces.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.5
• /
• pp.827-834
• /
• 2023

In this paper, a slotless outer rotor BLDC motor for a vehicle blower was designed and manufactured to improve the disadvantages of general motors. The proposed motor solves the noise caused by mechanical friction of DC motor during rotation by removing the brush, Also, slotless air-gap windings are used to improve cogging torque by BLDC motor slots. Then, the motor has a structure in which a magnet is attached to the external rotor and rotates simultaneously with the internal rotor, there is no change in magnetic flux. Therefore, it has high efficiency by fundamentally reducing iron loss.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.143-144
• /
• 2017

에어보트(Air boat)는, 판옥선처럼 선체 밑바닥이 편평한 형태로 되어있어 물위는 물론 일반 선박이 갈 수 없는 얕은 수면, 늪지수풀 위를 달릴 수 있는 모터보트의 한 종류로서, 팬 보트(Fan boat) 혹은 덕 보트(Duck boat)라고 불리기도 한다. 선체상부 뒤쪽에 장착된 로터의 회전에 의한 풍력으로 추진되며, 로터 바로 뒤에 방향키가 있다. 선체 재질로는 스틸, FRP 등이 사용되고 있으나 최근 고부가선박을 대상으로 알루미늄, 탄소섬유 사용이 늘어나고 있다. 주로 수상 크루징, 낚시, 스쿠버 등에 활용되며, 특히 선저의 독특한 형상으로 인해 군사용, 인명구조용, 수산물수송용 등 특수 목적으로도 사용된다. 이 연구에서는 에어보트 국산화 개발을 위해 주요 개발항목을 도출하고, 12인승 보트를 제조하고자 한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.463-464
• /
• 2008

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.416-423
• /
• 2004

This paper presents the thermal characteristic analysis of a high-speed horizontal machining center with spindle speed of 50,000rpm and feedrate of 120m/fin. The spindle system is designed based on the built-in motor, angular contact ceramic ball bearings, oil-air lubrication and oil-jacket cooling method. The X-axis and Y-axis feeding systems are composed of the linear motors and linear motion guides, and the Z-axis feeding system is composed of the servo-motor, ball screw and linear motion guides. The thermal characteristics such as the temperature distribution, temperature rise, thermal deformation and step response, are estimated based on the finite element model of machining center and the heat generation rates of heat sources related to the machine operation conditions. Especially, the thermal time constant assessed from the step response function is introduced as an index of thermal response characteristics.