• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.04a
• /
• pp.10-10
• /
• 2000

램제트 엔진은 비추력이 높고 추력 레벨은 낮으므로, 2단 추진기관에 적합한 추진 시스템이다. 1단-추진기관의 작동이 끝나고, 2단 램제트 엔진이 점화 후 안정된 연소에 도달되기까지 비행체의 속도는 항력에 의하여, 초당 약 마하수 0.1 정도씩 감소된다. 1단 연소 후 2단 램제트로 전환되는 지연시간이 길수록 1단에서 요구되는 종말 가속도는 증가되므로, 1단이 차지하게되는 부피는 증가되고 비행체의 크기 또한 늘어나게 된다. 따라서 1단에서 2단 램제트로 천이되는데 소요되는 시간을 가능한 짧게 하는 것이 효과적이다. 그러나 램제트 엔진의 특성상 선결되어야할 다음과 같은 여러 문제들이 있다. 첫째, 1단 작동 시 공기 흡입구와 연소실은 차단벽으로 분리되어 있다가, 1단 연소후 차단막이 제거되어 외부공기가 램제트 연소실로 흡입된다. 흡입되는 공기는 흡입구의 형상에 의하여 램 압축되지만 초음속으로 연소실을 통과하게된다. 연료 주입 구에서 공급되는 연료는 연소실에서 유동의 흐름방향(streamline)에 따라서 연소실로 확산되는데, 연소되기 전에는 유속이 빠르게 노즐로 빠져 나가므로 램제트 연료가 재순환 구역(recirculation zone)으로 침투하는데 쉽지가 않다. 둘째, 연소실 입구에서 발생되는 와류 (ring vortex)는 1단 연료의 고온 연소 가스를 연소실로 확산시키는데, 비 균일한 온도 분포를 유발하여 램제트 연료의 점화에너지가 공급되는 시간이 적당하지 않을 경우 균일한 화염 전파에 악영향을 준다. 셋째, 연소실에서의 빠른 유동 조건은 연료가 연소실에 머무를 수 있는 시간을 감소시키며, 연소실 입구에서 강한 전단 응력이 발생되어 화염이 안정화되는데 악 영향을 미치게된다. 본 논문은 공기 흡입구, 연소실 및 노즐을 통합하여 수치해석을 하였으며 열유동/점화/연소등의 미케니즘을 이해하고, 주요 인자들 중 와류의 영향에 초점을 맞추었다.다고 판단되며 배기 가스 자체에 대기 공기중에 함유되어 있던 습기가 얼어붙는(Icing화) 문제가 발생하기 때문에 배기가스의 Icing을 방지하기 위하여 압축기 끝단에서 공기를 추출하여 배기부분에 송출할 필요성이 있는 것으로 판단되었다. 출구가스의 기체 유동속도가 매우 빠르므로 (100-l10m.sec) 이를 완화하기 위한 디퓨저의 설계가 요구된다고 판단된다. 또 연소기 후방에 물을 주입하는 경우 열교환기 및 기타 부분품에 발생할 수 있는 부식 및 열교환 효율 저하도 간과할 수 없는 문제로 파악되었다. 이러한 기술적 문제가 적절히 해결되는 경우 비활성 가스 제너레이터는 민수용으로는 대형 빌딩, 산림, 유조선 등의 화재에 매우 적절히 사용되어 질 수 있을 뿐 아니라 군사적으로도 군사작전 중 및 공군 기지의 화재 그리고 지하벙커에 설치되어 있는 고급 첨단 군사 장비 등의 화재 뿐 아니라 대간첩작전 등에 효과적으로 활용될 수 있을 것으로 판단된다.가 작으며, 본 연소관에 충전된 RDX/AP계 추진제의 경우 추진제의 습기투과에 의한 추진제 물성 변화는 미미한 것으로 나타났다.의 향상으로, 음성개선에 효과적이라고 사료되었으며, 이 방법이 편측 성대마비 환자의 효과적인 음성개선의 치료방법의 하나로 응용될 수 있으리라 생각된다..7%), 혈액투석, 식도부분절제술 및 위루술·위회장문합술을 시행한 경우가 각 1례(2.9%)씩이었다. 13) 심각한 합병증은 9례(26.5%)에서 보였는데 그중 식도협착증이 6례(17.6%), 급성신부전증 1례(2.9%), 종격동기흉과 폐염이 병발한 경우와 폐염이 각 1례(2.9%)였다. 14) 식도경 시행회수는 1회가 17례(54.8%), 2회가 9례(29.0%), 3회 이상이 5례(16.1%)였다.EX>$IC_{50}$/ 값이 210 $\mu\textrm{g}$/$m\ell$로서 효과적

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.4
• /
• pp.331-341
• /
• 2013

In a solar domestic hot water (SDHW) system, solar energy is collected using collector panels, transferred to a circulating heat transfer fluid (brine), and eventually stored in a thermal storage tank (TST) as hot water. In this study, a computational fluid dynamics (CFD) model was developed to predict the solar thermal energy storage in a hybrid-type TST equipped with a helical jacket heater (mantle heat exchanger) and an immersed spiral coil heater. The helical jacket heater, which is the brine flow path attached to the side wall of a TST, has advantages including simple system design, low brine flow rate, and enhanced thermal stratification. In addition, the spiral coil heater further enhances the thermal performance and thermal stratification of the TST. The developed model was validated by the good agreement between the CFD results and the experimental results performed with the hybrid-type TST in SDHW settings.

• Economic and Environmental Geology
• /
• v.35 no.6
• /
• pp.545-552
• /
• 2002

In order to investigate the influence of nuclear power plant operation on its nearby environment, soil, stream and marine sediment samples were collected in the vicinity of the Youngkwang Nuclear Power Plant in Korea, and analyzed for artificial and natural radionuclide radioactivity. From the analytical result, Cs-137 was detected in most soil samples. but it may have been derived fiom past nuclear weapon tests because Cs-134 having short half-live was not detected. The radioactivities of Cs-137 in the sediment samples were also detected which are within the normal range in the sediments based upon the published literature between 1997 and 1999. For the quality control of radioactivity analysis of environmental samples, sets of marine sediments in the Gamami area were analyzed using two HPGe Gamma-ray Spectroscopes (30% and 45%) according to the geostatistical sampling strategy, and Cs-137 and K-40 results were interpreted by analysis of variance (ANOVA). In the two-way ANOVA, variances derived from the geochemical variation were significant, but errors from sampling and analytical procedures are negligible. In conclusion. all the radioanalytical procedures of this study including sampling are validated to be acceptable.

• The KIPS Transactions:PartC
• /
• v.15C no.5
• /
• pp.383-390
• /
• 2008

The mobile sink is most suitable to guarantee the real time processing to events in ubiquitous environment. However it brings many challenges to wireless sensor networks. In particular, the question of how to transfer the collected data to the mobile sink is an important topic in the aspect of effective management of wireless sensor nodes. In this paper, a new data dissemination model is proposed. Since this method uses the home agent and the access node concepts, it provides reliable and efficient data delivery to mobile sink with minimum overhead. In this proposed method, the information of the mobile sink which is constantly moving is informed only to the home agent node and the access node, instead of all sensor nodes. Thus, the collected data from sensor nodes are transferred to the fixed home agent and it sends these data to the mobile sink. Since the confliction phenomenon between data packets in wireless networks could be reduced, the success ratio of data arriving in the mobile sink is highly enhanced. In our experiments, the proposed method reduces the number of broadcast packets so that it saves the amount of energy consumed for transmitting and receiving the data packets. This effect contributes to prolong the lifetime of the wireless sensor networks operated by batteries.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.54-54
• /
• 2012

전통 날염방식(Silk Screen)과 디지털날염(Digital Textile Printing)을 비교해보면, 디지털날염은 디자인에서부터 날염까지의 전공정을 완전히 디지털화함으로서 다양하게 디자인할 수 있고 미묘한 색감의 흐름을 표현할 수 있어서 자연스러운 이미지의 표현이 가능하다. 그러나 현재 디지털날염을 피혁이나 직물에 적용하기에는 프린팅속도가 느려서 생산성이 낮고 이미지 내구성(세탁, 승화, 일광, 및 마찰견뢰도)이 낮은 등 많은 단점을 가지고 있다. 또한 신발산업은 현재 중국이나 동남아시아 등 개발도상국의 등장으로 수출의 국제적 경쟁시대에 접어들면서 대량생산이나 획일적인 디자인으로부터 벗어나 고부가가치 상품을 생산해야하는 과제를 안게 되었다. 한편 가죽에 응용가능한 잉크는 크게 수성, 유성, 용제형과 자외선 경화형의 잉크가 있으며 자외선 경화형 잉크는 자외선을 이용하여 기존의 잉크의 단점을 보완한 것이다. 자외선 경화형 잉크는 자외선 램프를 열원으로 하여 이온 또는 라디칼 중합, 광중합을 하며, 에너지 소비가 적어 경제적이며 시스템 가동시 비활성 기체가 필요하지 않다. 또한 자외선 경화형 기술은 상온에서 이용할 수 있으며 잉크의 경우 건조하는 데 걸리는 시간이 필요하지 않다. 또한 시스템을 가동 시키거나 중지 시키는 것이 쉬우며 고속으로 연속적인 일을 처리할 수 있다. 프린터의 크기가 작아 공간 효율이 유리하며 용제나 $CO_2$가 발생하지 않아 친환경적인 기술이라 할 수 있다. 따라서 본 연구에서는 자외선 경화형 시스템을 잉크에 적용하여 피혁 표면에 프린팅한 다음 그 견뢰도를 측정함으로써 그 효과를 알아보았다. 세탁에 의한 Matlab 측정값으로부터 용제형 잉크의 경우는 세탁 전, 후 line width가 큰 차이를 보이나 자외선 경화형 잉크의 경우는 그 차이가 적음으로부터 자외선 경화형 잉크가 용제형에 비해 색상 탈리가 적었음을 말한다. 또한 raggedness값 역시 마찬가지 결과를 보여 안료 색소와 피혁의 접착성이 향상된 것을 알 수 있다. SEM을 이용한 피혁의 표면과 단면 사진을 보면 용제형보다 자외선 경화형 잉크를 사용한 피혁이 좀 더 매끈한 표면을 보이는데 이것은 접착기능을 하는 아크릴레이트에 의해 균일한 날염이 가능하기 때문이라 고 생각된다. 이상의 결과로부터 자외선 경화형 잉크가 세탁, 마찰, 일광 견뢰도가 우수함을 알 수 있었으며 기존의 용제형 잉크를 대체할 수 있는 좋은 재료라고 생각된다.

• Microbiology and Biotechnology Letters
• /
• v.44 no.4
• /
• pp.504-511
• /
• 2016

Lactulose, a synthetic disaccharide, has received increasing interest because of its role as a prebiotic that can increase the proliferation of Bifidobacterium and Lactobacillus spp. and enhance the absorption of calcium and magnesium. While the industrial production of lactulose is still mainly achieved by the chemical isomerization of lactose in alkaline media, this process has drawbacks including the need to remove catalysts and by-products, as well as high energy requirements. Recently, the use of cellobiose 2-epimerase (CE) has been considered an interesting alternative for industrial lactulose production. In this study, to develop a process for enzymatic lactulose production using CE, we screened improved mutant enzymes ($CS-H^RC^E$) from a library generated by an error-prone PCR technique. The thermostability of one mutant was enhanced, conferring stability up to $75^{\circ}C$, and its lactulose conversion yield was increased by 1.3-fold compared with that of wild-type CE. Using a recombinant Escherichia coli strain harboring a CS35 $H^RC^E$-expressing plasmid, we prepared cell beads immobilized on a Ca-alginate substrate and optimized their reaction conditions. In a batch reaction with 200 g/l lactose solution and the immobilized cell beads, lactose was converted into lactulose with a conversion yield of 43% in 2 h. In a repeated 38-plex batch reaction, the immobilized cell beads were relatively stable, and 80% of the original enzyme activity was retained after 4 cycles. In conclusion, we developed a reasonable method for lactulose production by immobilizing cells expressing thermostable CE. Further development is required to apply this approach at an industrial scale.

• Korean Journal of Environmental Agriculture
• /
• v.13 no.2
• /
• pp.183-190
• /
• 1994

To assess the effects of plant stress by light, temperature, NaCl and soil moisture on photosynthetic activity, the fluorescence method was used for Chinese cabbage(Brassica perkinensis Rupr.), strawberry(Fragaria grandiflora Ehrh.) and citrus tree(Citrus unshiu Marc.). With decreasing the light intensity, Fv/Fm ratios of intact leaves of Chinese cabbage and strawberry increased significantly, indicating lower photochemical efficiency in PS II system, resulting in an inverse relationship with the photosynthetic activity. Chinese cabbage and strawberry that were grown at higher temperature had higher Fv/Fm ratios and photosynthetic activities, while those given high concentration of NaCl and having low soil moisture had lower values. Chinese cabbage more resistant to salt stress and requiring more water had a greater Fv/Fm ratio than strawberry. In citrus tree, Fv/Fm ratio was lower in the non-irrigated group than the irrigated one. From these results, the fluorescence method was found to be a useful tool which can be used to assess the degree of in vivo stress induced by various environmental factors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.1005-1012
• /
• 2011

This research carried out a 3-dimensional simulation using computerized fluid dynamics (CFD) for the flow characteristics, temperature distribution, velocity distribution and residence time, etc. in a reactor in order to derive the optimal combustion conditions of an innovative combustion system. The area-weighted average temperature of the outlet of a furnace during combustion at a condition of fuel input rate 1.5 ton/hr, residence time 1.25 sec and air/fuel ratio 2.1 was $1,077^{\circ}C$, which is a suitable temperature for energy recovery and treatment of air pollutants. Exhaust gas is discharged through a duct at a 40~50 m/s maximum speed along strong vortexes at the center of a combustion chamber, so strong turbulence is created at the center of a combustion chamber to enhance the combustion speed and combustion efficiency. In this system, the optimum operation conditions to prevent incomplete combustion and suppress the formation of thermal NOx were air/fuel ratio 1.9~2.1 and fuel input rate 1.25~1.5 ton/hr.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.107-114
• /
• 2017

A turbocharger is an engine supercharger that is driven by exhaust gas. It improves the output and fuel efficiency by increasing the charging efficiency of the mixture gas, which is achieved by changing the rotatory power of the turbine connected to the exhaust passage. It is important to control the supercharging for this purpose. A nozzle slide joint is one of the core parts. Austenitic stainless steel is currently used as the material for this part, and its excellent mechanical properties include high heat resistance and corrosion resistance. However, because of its poor machinability, there are many difficulties in producing products with complicated shapes. Machining is used in the production of nozzle slide joints for high dimensional accuracy after metal powder injection molding. As design variables in this study, we investigated the sintering temperature, product stress, deformation rate, radius of curvature of the punch, and angle of the chamfer punch, which are related to the strain and shapes. The goal is to suggest a forming process using Nitronic 60 that does not require machining to manufacture a nozzle slide joint for a turbocharger. Accordingly, we determined the best process environment using finite-element analysis, the signal-noise ratio, and the Taguchi method for experiment design. The relative density and hydrostatic pressure of the final product were in accordance with the results of the finite element analysis. Therefore, we conclude that the Taguchi method can be applied to the design process of metal powder injection molding.

• Journal of Venture Innovation
• /
• v.3 no.1
• /
• pp.165-182
• /
• 2020

This research shows solutions for relieving the reversibility of the VAT system, and the solutions will be reviewed with current issues about supporting welfare. The Followings provide practical implementing solutions for each issue. Since the VAT is taxed for all goods and services as a general consumption tax, it is efficient tax policy for resource allocation comparing to income tax. On the other hand, because of the reversibility of the tax burden is also treated as a non-effective tax system for fair taxation. Even it is a non-effective tax system, the VAT system takes the most portion from the total national tax. In South Korea economic system, it is hard to raise the VAT rate because the economic effects are tremendous. For the long-term, the possibility of increasing the VAT rate is unavoidable, considering the economy, society, environment and energy, and aging. Therefore, a variety of substituted policies for the reversibility should be covered once there is a conference for the increase in the VAT rate. This research provides foundational solutions by acknowledging the reversibility of the tax burden in terms of the effective value-added tax rate. The followings are four solutions. First, it is required to adjust the duty-free system for relieving the reversibility and expand the tax-free system as well as individual consumption tax items. Second, The relief of reversibility should be worked by imposing higher the tax rate for high-income people' goods and services. Third, the adjustment of the duty-free system could be considered due to relieve the reversibility of the VAT. Last, it is considered to adjust of the simplified taxation system because the simplified taxation system is seriously against the tax-transfer principles.