• Journal of the Korea Society for Simulation
• /
• v.17 no.3
• /
• pp.27-34
• /
• 2008

Wireless sensor networks are comprised of sensor nodes with resource-constrained hardware. Nodes in the sensor network without adequate protection may be compromised by adversaries. Such compromised nodes are vulnerable to the attacks like false reports injection attacks and false data injection attacks on legitimate reports. In false report injection attacks, an adversary injects false report into the network with the goal of deceiving the sink or the depletion of the finite amount of energy in a battery powered network. In false data injection attacks on legitimate reports, the attacker may inject a false data for every legitimate report. To address such attacks, the probabilistic voting-based filtering scheme (PVFS) has been proposed by Li and Wu. However, each cluster head in PVFS needs additional transmission device. Therefore, this paper proposes a fuzzy logic-based false report detection method (FRD) to mitigate the threat of these attacks. FRD employs the statistical en-route filtering scheme as a basis and improves upon it. We demonstrate that FRD is efficient with respect to the security it provides, and allows a tradeoff between security and energy consumption, as shown in the simulation.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.12
• /
• pp.1224-1228
• /
• 2010

The existing cluster-based routing protocols have some problems. Firstly, because of selecting cluster head at random, they occur a node concentration problem. Secondly, they have a low reliability for data communication due to the less consideration of node communication range. Finally, data communication overhead is greatly increased because of sending all sensor node information to sink node for constructing clusters. To solve these problems, we in this paper, propose a cluster-based routing protocol using message reception success rate. Firstly, to solve the node concentration problem, we design a cluster head selection algorithm based on node connectivity and devise cluster spliting/merging algorithms. Secondly, to guarantee data communication reliability, we use message reception success rate. Finally, to reduce data communication overhead, we use only neighbor nodes information at both cluster construction and cluster head selection.

• Journal of KIISE
• /
• v.42 no.6
• /
• pp.707-712
• /
• 2015

Mobile cloud computing is a technology that uses cloud services to overcome resource constrains of a mobile device, and it applies the computation offloading scheme to transfer a portion of a task which should be executed from a mobile device to the cloud. If the communication cost of the computation offloading is less than the computation cost of a mobile device, the mobile device commits a certain task to the cloud. The previous cost analysis models, which were used for separating functions running on a mobile device and functions transferring to the cloud, only considered the amount of data transfer and response time as the offloading cost. In this paper, we proposed a new task partitioning scheme that considers the frequency of function calls and data synchronization, during the cost estimation of the computation offloading. We also verified the energy efficiency of the proposed scheme by using experimental results.

• The Journal of the Korea Contents Association
• /
• v.10 no.3
• /
• pp.53-63
• /
• 2010

Recently, various monitoring systems are implemented actively by using wireless sensor networks(WSN). When implementing WSN-based monitoring system, there are three important issues to consider. At First, we need to consider a sensor node failure detection method to support the ongoing monitoring. Secondly, because sensor nodes use limited battery power, we need an efficient data filtering method to reduce energy consumption. At Last, a reducing processing overhead method is necessary. The existing Kalman filtering scheme has good performance on data filtering, but it causes too much processing overhead to estimate sensed data. To solve these problems, we, in this paper, propose a new data filtering scheme based on data statical analysis. First, the proposed scheme periodically aggregates node survival massages to support a node failure detection. Secondly, to reduce energy consumption, it sends the sample data with a node survival massage and do data filtering based on those messages. Finally, it analyzes the sample data to estimate filtering range in a server. As a result, each sensor node can use only simple compare operation for filtering data. In addition, we show from our performance analysis that the proposed scheme outperforms the Kalman filtering scheme in terms of the number of sending messages.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.2
• /
• pp.27-37
• /
• 2009

Sensor nodes forming a sensor network have limited energy capacity such as small batteries and when these nodes are placed in a specific field, it is important to research minimizing sensor nodes' energy consumption because of difficulty in supplying additional energy for the sensor nodes. Clustering has been in the limelight as one of efficient techniques to reduce sensor nodes' energy consumption in sensor networks. However, energy saving results can vary greatly depending on election of cluster heads, the number and size of clusters and the distance among the sensor nodes. /This research has an aim to find the optimal set of clusters which can reduce sensor nodes' energy consumption. We use a Genetic Algorithm(GA), a stochastic search technique used in computing, to find optimal solutions. GA performs searching through evolution processes to find optimal clusters in terms of energy efficiency. Our results show that GA is more efficient than LEACH which is a clustering algorithm without evolution processes. The two-dimensional GA (2D-GA) proposed in this research can perform more efficient gene evolution than one-dimensional GA(1D-GA)by giving unique location information to each node existing in chromosomes. As a result, the 2D-GA can find rapidly and effectively optimal clusters to maximize lifetime of the sensor networks.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.3
• /
• pp.304-313
• /
• 2013

Wireless Sensor Networks, especially supporting for surveillance service, are one of the core properties of network-centric warfare(NCW) that is a key factor of victory in future battlefields. Such a tactical surveillance sensor network must be designed not just for energy efficiency but for real-time requirements of emergency data transmission towards a control center. This paper proposes efficient clustering-based methods for supporting mobile sinks so that the network lifetime can be extended while emergency data can be served as well. We analyze the performance of the proposed scheme and compare it with other existing schemes through simulation via Qualnet 5.0.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4B
• /
• pp.165-173
• /
• 2008

In this paper, we propose a new reliable broadcast protocol referred to as timer-based reliable broadcast (TRB) for wireless sensor networks (WSNs). The proposed TRB scheme exploits (1) bitmap based explicit ACK to effectively reduce the unnecessary error control messages and (2) randomized timer for ACK transmission to substantially reduce the possibility of contentions. Although it has been argued that 100% reliability is not necessary in WSNs, there should be messages (such as mission-critical message, task assignment, software updates, etc.) that need to be reliably delivered to the entire sensor field. We propose to use the TRB algorithm for such cases. Performance evaluation shows that the TRB scheme achieves 100 % reliability significantly better than other schemes with expense of slightly increased energy consumption.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.9
• /
• pp.25-37
• /
• 2007

The existing route re-establishment methods which intend to extend the lifetime of the network attempt to find new routes in order not to overly consume energy of certain nodes. These methods outperform other routing algorithms in the network lifetime extension aspect because they try to consume energy evenly for the entire network. However, these algorithms involve heavy signaling overheads because they find new routes based on the flooding method and route re-acquisition occurs often. Because of the overhead they often can not achieve the level of performance they intend to. In this paper, we propose a new route re-acquisition algorithm ARROW which takes into account the cost involved in the packet transmission and the route re-acquisition. Since the proposed algorithm considers future route re-acquisition costs when it first finds the route, it spends less energy to transmit given amount of data while evenly consuming the energy as much as possible. Using 2-dimensional Markov Chain model, we compare the performance of the proposed algorithm and that of other algorithms. Analysis results show that the proposed algorithm outperforms the existing route re-acquisition methods in the signaling overhead and network lifetime aspects.

• The KIPS Transactions:PartB
• /
• v.12B no.6 s.102
• /
• pp.679-684
• /
• 2005

There are a few representative wireless network access technologies used widely. WWAN is celluar based telecommunication networks supporting high mobility, WLAN ensures high data rate within hotspot coverage, and WDMB support both data and broadcasting services correspondingly. However, these technologies include some limitations especially on the mobility, data rate, transmission direction, and so on. In order to overvome these limitations, there are various studies have been proposed in terms of 'Vortical Handoff' that offers seamless connectivity by switching active connection to the appropriate interface which installed in the mobile devices. In this paper, we propose the interface selection algorithm and network architecture to maximize the life time of entire system by minimizing the unnecessary energy consumption of another interfaces such as WLAN, WDMB that are taken in the user equipment. In addition, by using the results of analyzing multiple types of traffic and managing user buffer as a metric for vertical handoff, we show that the energy efficiency of our scheme is $75\%$ and $34\%$ than typical WLAN for WDMB and WLAN preferred schemes, correspondingly.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.11
• /
• pp.2178-2187
• /
• 2015

Bluetooth Low Energy (Bluetooth LE) is a representative break-through communication technology for wireless personal area networks on nowaday. In this environment, most of significant performance should be aiming to energy efficiency due to the policy for manufacturing light-weighted communication devices derived from requirement of world IoT market, and many researches have been developed to satisfy this requirement. While Bluetooth LE has been leading the low power communication technology required from the current market by employing duty cycle and frequency hopping approaches, it couldn't address the problem of reliability on broadcast transmissions. The main goal of this paper is aiming to addressing this problem by suggesting a new method. Furthermore analytic evaluations would also be proceeded to find objective results in the view point of broadcast transmission efficiency from Master device.