• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.888-889
• /
• 2008

본 논문은 직류단 전원(DC link)에 대용량의 전해 캐패시터(Electrolytic capacitor)를 사용하지 않는 전해 캐패시터리스 (Electrolytic-Capacitorless) 인버터의 입력 전류와 직류단 전원 공진(resonance) 억제에 대한 것이다. 직류단 전원의 순시적인 에너지원으로 사용되는 전해 캐패시터를 사용하지 않는 캐패시터리스 인버터는 기존의 인버터에 비해서 가격, 부피 면에서 장점을 가지지만, 직류단 전원의 캐패시터 용량이 작아서 부하 단 스위칭의 영향이 입력 전류에 직접적으로 나타나게 된다. 이에 따라서 캐패시터리스 인버터는 필연적으로 입력 단에 저역 통과 필터(Low Pass Filter : LPF)가 필요하다. 입력 단의 필터는 간단한 구조와 가격적 측면을 고려하여 LC 필터가 주로 사용되는데, LC필터는 직류단 전류에 의한 공진의 원인이 된다. 본 논문에서는 캐패시터리스 인버터의 입력 필터의 영향을 분석하여 입력 전류와 직류단 전압의 공진을 억제 할 수 있는 방법을 제시하고, 실험 결과를 통하여 제안된 방법의 유효성을 확인한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.12
• /
• pp.963-968
• /
• 2018

In this paper, a compact common mode filter using passive elements is designed and fabricated. To design a common mode filter with required frequency response, the equivalent circuits of the common mode filter in differential mode and common mode were analyzed. Compared with the former filter using a ${\lambda}/4$ resonator, the size of the proposed structure was reduced by 60 %. The fabricated common mode filter has a maximum differential mode insertion loss of 1.2 dB and a minimum common mode absorption efficiency of 78.2% in the CMA - bandwidth of 27.5 %.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.3
• /
• pp.349-356
• /
• 2015

Remote monitoring partial discharge sensor, equipping with hybrid filter combining optical and electrical noise reduction capabilities and with signal integrating function to calculate total arc energy, was investigated. Hybrid filter showed insensitivity to fluorescent and incandescent lamps under simulated distribution panel condition. Signal integrating function showed selective detection capability corresponding to different arc energy levels, while convention arc sensor had difficulty to discriminate arc energy level due to bursty arc waveform and peak level detection characteristics. The sensor showed possibility for application to remote monitoring partial discharge sensor, since it detected arc energy level corresponding to normal open and close discharge in low voltage 100A MCCB at 2m distance.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.3
• /
• pp.45-50
• /
• 2000

This paper proposes a delta energy method based on Parameter Filtering(PF), which is a speech segmentation algorithm for text dependent speaker verification system over telephone line. Our parametric filter bank adopts a variable bandwidth along with a fixed center frequency. Comparing with other methods, the proposed method turns out very robust to channel noise and background noise. Using this method, we segment an utterance into consecutive subword units, and make models using each subword nit. In terms of EER, the speaker verification system based on whole word model represents 6.1%, whereas the speaker verification system based on subword model represents 4.0%, improving about 2% in EER.

• Annual Conference of KIPS
• /
• 2007.11a
• /
• pp.995-998
• /
• 2007

무선 네트워크에서 사용되는 단말기는 이동성이라는 특징상 한정된 에너지를 사용하여 동작하게 된다. 따라서 무선 호스트에 의해 소모되는 에너지의 양을 감소시키기 위한 기술은 대단히 중요하다. 이러한 기술적 지원을 위해 IEEE 802.11 에서는 DCF (Distributed Coordination Function) 전력 절감 메카니즘을 제안하고 있다. 그런데, DCF 를 위한 IEEE 802.11 전력 절감 메카니즘에서는 ATIM 창 동안 노드들은 비콘 기간 동안 깨어 있는 상태로 있을 것인지를 결정하기 위해서 control packet 을 교환 하는데, 이러한 ATIM 창 크기는 각각의 노드들의 전력 절감에 상당한 영향을 미친다. 그래서 ATIM 창 크기를 효율적으로 할당하기 위해 DPSM 과 같은 기법들이 개발되었다. 본 논문은 ATIM 창 크기를 동적으로 증감시켜서 ATIM 창 시간동안 소모되는 에너지를 줄이도록 하였다. ATIM 창 크기를 동적으로 할당하기 위하여 통계적 예측 기법인 칼만 필터를 도입하여 예측시스템을 구축하였으며, 이 예측 시스템을 통해 다음 상태에서 적용할 ATIM 창 크기를 예측하여 동적으로 할당하도록 하였다. 실험 결과 네트워크 생존 시간을 28.6% 증가시켰고, ATIM 창 크기 예측값의 오차는 4.42%로 나타났다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2836-2842
• /
• 2010

An NPC grouping method is proposed for various 3D games depending on their characteristics. Immovable objects tend to have particular orientation features in their Gabor filtering results whereas the movable objects controlled by AI appearing as a human or an animal do not. First of all, We analyzed directional and frequency domain features in the NPC object and configured them as 24 Gabor filter banks. Then, 24-dimensional feature vectors according to the scale and direction of the filter are calculated. Each extracted vector represents the energy of a certain direction. This energy indicates the particular direction strength of the object texture. Thus, using this property, NPCs could be grouped as artificial objects and natural objects effectively and it draws the game more speed and strategic actions as a result.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.6
• /
• pp.466-473
• /
• 2016

In a shipbuilding process, thermal damage to the ship structure at the rear end results from an excessive heat input and conduction during welding process. To prevent such damage, appropriate control of the heat input, based on welding temperature measurement, is required. For temperature measurement, contact and non-contact methods are available; the thermography system is a popular non-contact temperature measurement. When the intensity of radiation from a high-temperature object is excessive, however, detecting the sensors of ordinary thermography systems leads to an inability in measuring the temperature due to saturation. Hence, this study suggests use of a neutral density filter that prevents an excessive amount of radiation from being accumulated in a thermography system, and thus makes it possible to quantitatively measure an object's temperature as high as $3000^{\circ}C$.

• Journal of Radiation Protection and Research
• /
• v.23 no.1
• /
• pp.33-47
• /
• 1998

Using a combination of an X-ray generator Installed in radiation calibration laboratory of Korea Atomic Energy Research Institute (KAERI) and a series of 8 radiators and filters described in ISO-4037, monoenergetic fluorescent X-rays from 8.6 keV to 75 keV were produced. This fluorescent X-rays generated by primary X-rays from radiator were discriminated $K_{\beta}$ lines with the aid of filter material and the only $K_{\alpha}$ X-rays were analyzed with the high purity Ge detector and portable MCA. The air kerma rates were measured with the 35 co ionization chamber and compared with the calculational results, and the beam uniformity and the scattered effects of radiation fields were also measured. The beam purities were more than 90 % for the energy range of 8.6 keV to 75 keV and the air kerma rates were from 1.91 mGy/h (radiator : Au, filter : W) to 54.2 mGy (radiator : Mo, filter : Zr) at 43 cm from center of the radiator. The effective area of beam at the measurement point of air kerma rates was 12 cm ${\times}$ 12 cm and the influence of scattered radiation was less than 3 %. The fluorescent X-rays established in this study could be used for the determination of energy response of the radiation measurement devices and the personal dosemeters in low photon energy regions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1633-1639
• /
• 2010

Recently Wireless sensor networks have been used for many purposes and is active for this study. The various methods to reduce energy consumption, which are actively being studied Wireless sensor network to reduce energy consumption, leading to improve transport efficiency, Cluster can be viewed using the research methods. Cluster method researches consists of a sensor node to the cluster and in among those they take out the Cluster head node and Cluster head node is having collects sensing information of circumferential nodes sensing to sink node transmits. Selected as cluster head sensor nodes so a lot of the energy consumption is used as a cluster head sensor nodes is lose a shorter life span have to be replaced by another sensor node. In this paper, to complement the disadvantages of a cluster-mesh method, proposes to manage memory efficiently about filtering method for sensing data. Filtering method to store the same data sensing unlike traditional methods of data filtering system sensing first sent directly by the hashing algorithm to calculate the hash table to store addresses and Sensing to store data on the calculated address in a manner to avoid duplication occurred later, and sensing data is not duplicated by filtering data to be stored in the hash table is a way.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.227-230
• /
• 1999

잔향에 대한 인간의 주관적인 지각을 잔향기 설계에 객관적인 수치로써 반영하는 방법으로, 5 자유도 잔향 모델이 제안된 바 있다[1]. 5자유도 잔향 모델은 잔향에 대한 다섯 개의 객관적인 평가량들을 이용하여 시간에 따른 음 에너지 감쇠 곡선을 근사화한 것이다. 즉 5 자유도 잔향 모델을 이용하여 청취자가 원하는 특성을 갖는 잔향을 객관적으로 묘사할 수 있고, 이는 잔향을 합성할 때 잔향 필터의 설계 기준이 된다. 그러나 이 모델로부터 만들 수 있는 잔향 필터의 개수는 실로 무한하고, 그 중에는 인간이 듣기에 부자연스러운 합성음을 만들어 내는 경우도 있다. 즉 자연스러운 잔향을 만들기 위해서는 잔향 모델 외에도 부가적인 잔향 설계 기준이 필요하다. 시간, 주파수 영역에서 대표적인 특성을 갖는 몇 종류의 원음에 대한 청음실험을 통해, 필요한 잔향 설계 기준을 제시한다.