• Korean Journal of Food Science and Technology
• /
• v.21 no.5
• /
• pp.601-605
• /
• 1989

Water absorption of the major kernels(7 and 10mesh sizes) of naked barley differing in pearling degrees at $25-50^{\circ}C$ was investigated. The time to reach equilibrium moisture content was reduced by half upon removal of over 20% of the outer layer of the kernel. Water absorption rate and diffusion coefficient of naked barley of 5% pearling degree at $40^{\circ}C$ were faster about 1.5 and 2.8 times than those of unpearled one. The activation energy of hydration for unpearled naked barley was 11.5kcal/mole, which was decreased by approximately 0.4kcal/mole upon increasing the pearling degree by 5%.

• Korean Journal of Materials Research
• /
• v.11 no.3
• /
• pp.221-226
• /
• 2001

The basal slip (0001)1/3<1120 > dislocation velocity in sapphire ($\alpha$-$Al_2$$O_3$) single crystals was measured by four-point bending test. The bending experiment was carried out in the temperature range from 120$0^{\circ}C$ to $1400^{\circ}C$ at various engineering stresses 90MPa, 120MPa, and 150MPa. The velocity of such dislocations was estimated from the bending displacement rate of the four-point bend sample. The dependence of temperature and stress in dislocation velocity was investigated. The activation energy for dislocation velocity was determined to be about 2.2$\pm$0.4eV. In addition, the stress exponent (m) describing the stress dependence of dislocation velocities was in the range of 2.0$\pm$0.2.

• Journal of the Korean Electrochemical Society
• /
• v.18 no.4
• /
• pp.172-181
• /
• 2015

Solid Oxide Fuel Cells (SOFC) continue to be among the most promising alternative energy devices. This paper addresses i-V characteristics of SOFC with a focus on air flow rate along the planar anode electrodes. To address this, detailed Butler-Volmer kinetics are implemented in a general-purpose CFD code FLUENT. The numerical results were validated against experimental data from the literature showing excellent match with i-V polarization data ranging 1V-0.4V. Numerical calculations of fuel cell operation under different flow rare conditions were performed in three-dimensional geometries. Results are presented in terms of concentration distribution of hydrogen, oxygen, and water. The simulations and results indicate that advanced CFD with UDF(User-Defined Function) of Butler-Volmer kinetics can be used to identify the conditions leading to air flow rate and specific surface area and guide development of operating conditions and improve the fuel cell system performance.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.8
• /
• pp.67-74
• /
• 2008

In this paper we describe discharge characteristics between needle-to-plane electrodes in water in various conditions such as different impulse voltages, polarities and water resistivities. Streamer corona is initiated at the tip of needle electrode and propagates toward plane electrode, and it experiences the final jump across the test gap. The branched channels of streamer coronas for lower water resistivities are much thicker and brighter than those for higher water resistivities at the same level of applied voltage. The negative streamer coronas not only have more branches but also widely spread out compared to the positive streamer coronas. A number of pulse-like currents ranging from some hundreds mA to a few A after streamer corona onset were produced with discharge developments. The time-lags-to breakdown for the positive polarity were remarkably shorter than those for the negative polarity. The pre-breakdown energy supplied into the test gap was inversely proportional to water resistivity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5946-5956
• /
• 2011

The purpose of this study is to discourage urban sprawl that optimize the use of natural resources and reduce demand for transportation, energy consumption, and also protect green and blue networks. For this purpose, this study discusses about the Sustainable Development (SD), urban systems toward SD and defines the concepts and the goals of Green Compact City (GCC). It then finds out the basic planning strategies to agree with GCC. Based on these strategies, it reviews the foreign case study, to obtain a mainly significance development of these planning strategies. As well as then conducts a questionnaire survey to experts and residents of Ulaanbaatar (UB) city to obtain a better understanding of the current condition and the most significant planning strategies in UB city. Therefore the basic planning strategies which can more suits in UB city and it could be the GCC is derived from the most complied planning strategies in other developed countries compared with most significant planning strategies in UB city.

• Journal of Sensor Science and Technology
• /
• v.7 no.4
• /
• pp.234-242
• /
• 1998

Changes in transmission and thermoluminescent characteristics were used in order to find out the optimum growth condition of CsI single crystal scintillators which were made relatively defect-free using Czochralski method. Impurity distribution in the crystals and the intensity and number of thermoluminescent glow peaks decreased as the process of crystallization was repeated. The direction of crystal growth turned out to be (110), the crystal structure of grown CsI was bee, and its lattice constant was found to be $4.568{\AA}$. The activation energy (trap depths) of CsI:3rd was 0.45 eV and its frequency factor was $5.18{\times}10^5\;sec^{-1}$.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.1
• /
• pp.88-97
• /
• 2016

A closed loop thermal control system simulates space thermal environment to verify the satellites' functionality in extremely cold/hot temperature. It is composed of a cryogenic blower, thermal shroud, heater, cryogenic valves. This paper presents an overview of closed loop thermal control system's design parameter and test results for control parameter. A capacity of blower is calculated through energy balance equation and an advantage/disadvantage for a shroud material and a type was analysed. The thermal control system is controlled by a constant density of fluid in the system. A requested performance of closed loop thermal control system was verified by measuring a homogeneity and stability of shroud through control parameter such as density and RPM of blower.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.356-356
• /
• 2018

기후변화는 자연적 요인보다는 인간의 활동으로부터 기인하는 것으로 알려진다. 지구 온난화의 영향으로 우리나라의 평균 기온은 상승하고 있으며, 강수량 또한 증가추세에 있다. 이러한 미래 기온의 상승과 강수량의 변화는 나아가 수문 순환에 영향을 미치며, 수자원의 효과적인 이용을 위하여 기후변화에 따른 수문 순환 특성을 파악하는 것은 매우 중요하다. 이에 본 연구에서는 국제 수문 프로그램의 대상 유역 중 하나로 장기간의 강우-유출 자료가 구축되어있는 청미천 유역을 대상으로, 기후변화에 따른 지표 유출량 변화를 살펴본다. 기후변화를 전망하기 위한 방법으로 인간 활동이 대기에 미치는 복사량으로 온실 가스 농도를 정의하는 시나리오인 대표농도경로(Reperentative Concentration Pathway, RCP)를 적용하였다. 기상청에서 제공되는 여러 RCP 시나리오 중 기후변화가 현재의 추세를 쫓아 상승 형태를 나타내는 RCP 8.5 시나리오와 저감 정책이 어느 정도 실현되어 형태가 안정된 RCP 4.5 시나리오 두 개를 선정하였다. 기후변화 시나리오는 근본적으로 불확실성을 포함하기 때문에, 특정 기후변화를 가정하기 보다는 특성이 대비되는 두 개 시나리오를 적용하여 기후변화의 발달 정도에 따른 유출량 변화를 살펴보고자 한다. 장기간의 수문 순환 특성을 모의하기 위하여 준 분포형 장기유출 모형인 Soil and Water Assessment Tool(SWAT)을 이용하며, SWAT에서 요구되는 방대한 양의 매개변수들은 매개변수의 최적값 산정 프로그램인 SWAT Calibration and Uncerntianty Programs (SWAT-CUP)을 통해 얻는다. 과거의 강우-유출 자료로부터 구축된 SWAT 모형에 기후변화 시나리오를 적용함으로써 기후변화 시나리오에 따른 지표유출량 변화를 살펴볼 수 있다. 구축된 SWAT 모형을 이용하여 모의를 한 결과, 두 개 시나리오 모두에서 청미천 유역의 지표유출량이 증가하는 것으로 나타났으며 RCP 4.5 시나리오보다 RCP 8.5 시나리오에서 더 많은 유출이 발생할 것으로 전망된다. 유출량의 증가와 함께 총 부유사량 또한 증가 추세에 있으며, RCP 8.5 시나리오에서 더 많은 유출이 계산된다. 이러한 유출량의 증가는 강수량, 기온, 일사량, 풍속, 습도와 같은 기후 특성의 변화가 고려된 결과로 판단된다. 기후변화에 따른 총 유사량의 증가는 범용토양 유실공식에서 강우 에너지의 증가로 인해 유출량과 동일한 양상을 띠는 것으로 판단된다.

• Journal of Convergence for Information Technology
• /
• v.11 no.10
• /
• pp.115-130
• /
• 2021

This study is to study the overall structural relationship between work-life balance(WLB), superior trust, workplace happiness, and organizational commitment. The goal of this study is to study how WLB and superior trust affect workplace happiness, how workplace happiness affects organizational commitment, and the mediating effect of workplace happiness. Survey data were collected from incumbents working in large companies and SMEs, validity and reliability of research items were reviewed, and research hypotheses were tested using path analysis. As a result of testing the research hypothesis, WLB and superior trust have a positive (+) effect on workplace happiness, and workplace happiness has a positive (+) effect on organizational commitment. Also, job satisfaction plays a role as a partial parameter between WLB, superior trust, and organizational commitment. Based on the hypothesis test results, it was confirmed that the higher the level of WLB and superior trust, the higher the level of work satisfaction. Based on the research results, a plan was suggested for Korean corporate members to achieve workplace happiness and organizational commitment.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.12
• /
• pp.59-69
• /
• 2018

In order to use the limit equilibrium theory, it is necessary to find a slip line under the ultimate failure condition. The strength reduction method using the Lagrangian finite element method defines the ultimate failure state at a time when the numerical solution cannot converge within the certain number of the iteration. When the coupled Eulerian-Lagrangian (CEL) method is used, however, such definition is inappropriate because the numerical solution of the CEL method can converge even under the ultimate failure condition. In this study, an objective condition designating the ultimate failure state in the finite element analysis adopting the CEL method was proposed. In the problem of the bearing capacity of the undrained soft ground subjected to the strip footing loading, we found that the rate of the plastic dissipated energy is highly sensitive at the load of the theoretical limit of the ultimate failure state.