• The Journal of the Acoustical Society of Korea
• /
• v.22 no.1
• /
• pp.7-13
• /
• 2003

Numerous investigations have demonstrated that diffused reflection is one of the most important factors in predicting room acoustics by computer simulation. Recent studies have suggested several computational algorithms in order to account for diffused reflections in the ray tracing or beam tracing method. In this study, a computational algorithm for the calculation of diffuse sound reflections in the image method is suggested and a computer simulation system is developed based on the suggested algorithm. The methodology adopted in our computer simulation system is similar to the extended radiosity method, which is developed for the computer graphics. In a real room, sound energy is reflected in a partially diffused manner which results in four reflection combinations: diffuse-diffuse, specular-specular, diffuse-specular and specular-diffuse. In this study, higher order form factor is introduced to handle the four types of reflection combinations so that the partially diffused reflection could be modeled. In this paper, the concept of extended radiosity method is described and the approximate method of calculating higher order form factor is suggested. Finally, the effect of higher order form factors on the simulation of reverberation time is investigated.

• Korean Journal of Materials Research
• /
• v.5 no.7
• /
• pp.820-828
• /
• 1995

Ti-sillcides are formed on an atomically clean Si substrate and its phase transition and surface and interface morphologies are examined depending on the Ti-film thicknesses, deposition temperatures and Si substrate orientations. Ti film thicknesses of 400$\AA$ and 200$\AA$ have been deposited at elevated temperatures from 50$0^{\circ}C$ to 90$0^{\circ}C$ with increments of 10$0^{\circ}C$ on Si(100) and Si(111) Ti-silicides are formed and analyzed with using XRD, SEM, and TEM to verify the phase transition and the surface and interface morphologies. The phase transition from C49 to C54 is observed to occur around $650^{\circ}C$ and examined to show some retardation depending on the substrate orientation and film thickness. This retardation of phase transition is explained by the consideration based on the surface and volume free energies. A rough surface of C49 TiSi$_2$is exhibited because of characteristics of nonuniform diffusion across the interface while the smooth surface and island formation of C54 TiSi$_2$is examined.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.5
• /
• pp.565-573
• /
• 2016

Wi-Fi Direct standard technology(Wi-Fi Peer to Peer Technical Specifications v1.2, 2010) was designed for allowing peer to peer communication between two or more devices and various products which have been currently manufactured such as smart phone and smart TV have already provided this technical function. In this technology the role of Coordinator in Wi-Fi infrastructure would be matched to GO(Group Owner) which needs relatively high energy resource and computation power due to the high probability for allowing 3rd-party connection, however, the current standard specification would be limited in terms of energy distribution because it has not included a process to determine the role of GO. To address above problem, this paper classified considerable parameters into the general parameters for the physicality of devices and the specific parameters for considering the role position depending on use-case scenario, and proposed a new method called DIVA to help efficiently determining GO role from the member devices of Wi-Fi Direct network. Furthermore the effect of this mechanism was proved via simulation-based experiments.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.2
• /
• pp.73-80
• /
• 2011

The present study deals with the propeller design for the standard new propeller series so called KF Series for 52ton class fishing vessel. The MAU or B series have been usually used for the fishing vessel's propeller, which are to be improved in consideration of the efficiency as well as the cavitation point of view. The high technology of propeller design has been applied to the design of 52ton class fishing vessel's propeller in the present study. The new designed series propellers will be validated by the experimental results whose data will be also used for the new series chart.

• Journal of Energy Engineering
• /
• v.21 no.2
• /
• pp.187-193
• /
• 2012

In this study, it was experimentally investigated the effect of the clearances distance between the rod and the impinging plate on characteristics of the thermal flow. For the heat transfer enhancement of wall jet region, the right triangle and the square rods were arranged in front of the impinging plate with various clearance distances. As results, the heat transfer enhancement rate of potential core region at H/B=2 was higher than that of transition region at H/B=10. In this experiment range, the maximum heat transfer enhancement rate was about 46 % higher at the square rod with H/B=2 and C=1mm compared with the flat plate. The heat transfer enhancement rate of the right triangle rod was on average about 3 to 8 % higher than that of the square rod, regardless of the clearance.

• Journal of Energy Engineering
• /
• v.19 no.4
• /
• pp.246-250
• /
• 2010

It was measured engine power, specific fuel consumption and exhaust emissions to analyze fuel economy between LNG dual fuel vehicle and base diesel one. The tested LNG dual fuel engine is converted from diesel engine having 12 liter heavy duty class. The power of LNG dual fuel engine is 5% lower than diesel one and the engine efficiency is also lower than diesel case. However the exhaust emission of diesel engine such as PM, NOx, CO and $CO_2$ showed higher than that of LNG duel fuel case except NMHC component. And economical analysis were carried out two cases for an aspect of fuel economy and environmental benefit. As a result, LNG dual fuel vehicle gives some economic benefit to whom both business party and public side respectively though considering the subsidy and price discount for diesel.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.107-107
• /
• 1998

GaN 에피택시 층의 전기적, 광학적 특성 및 표면 형상의 향상을 위한 전처리 공 정으로서 사파이어 기판의 질화 처리가 많이 행해지고 있는데 이는 표면에 질화 충올 형성시킴으로서 GaN 충과의 계면에너지 및 격자상수 불일치를 줄여 GaN 충의 성장을 촉진시킬 수 있기 때문이다 본 실험에서는 고 진공 하에서 유도 결합 플라즈마를 이용하여 사파이어 기판의 질화 처리를 행한 후 XPS와 AFM을 이용하여 기판 표면의 질소 조성과 표면 형상을 관찰하였다. 기판 표면의 질소 조성은 질소 가스의 유입량과 기판의 온도보다 칠화 시 간 및 RF-power에 의해 크게 좌우되나 표면 형상은 기판의 온도에 크게 영향올 받는 것으로 나타났다. 따라서 본 실험에서는 기판의 온도를 낮춤으로서 protrusion이 없는 매끈한 표면의 질화 충을 얻올 수 있었다. 핵생성 충의 성장 없이 450 oC의 저온에서 GaN 충올 성장시킨 결과 육방 대청성 의 wurtzite구조를 가지며 bas허 plane이 사파이어 기판과 in-plane에서 300 회전된 관계 를 갖고 있는 것올 XRD -scan으로 관찰하였다. 또한 GaN 충의 성장이 진행됩에 따라 결정성이 향상되고 있는 것이 뼈S ali맹ed channeling 실험올 통해 관찰되었으며 이는 G GaN 충의 두께 중가에 따라 결정성이 향상된다는 것올 의미한다 사파이어 기판의 질 화 처 리 시 간이 증가함에 따라 후속 성 장된 GaN 층의 bas외 pI뻐e에 대 한 XRD -rocking c curve의 반치폭이 감소하는 것으로 나타났는데 이는 기판의 표면이 질화 충으로 전환 됨에 따라 각 GaN island의 c-축이 잘 정렬됨올 의미한다. 또한 AFM으로 ~이 충의 표 면 형상올 관찰한 결과 기판의 질화 처리가 선행될 경우 lateral 방향으로의 G뼈 충의 성장이 촉진되어 큰 islands로 성장이 일어나는 것으로 관찰되었는데 이는 질화 처리가 선행될 경우 Ga과 N의 표면 확산에 대한 활성화 에너지가 감소되기 때문인 것으로 생 각된다 일반적으로 GaN 에피택시 충의 결정성의 향상과 lateral 생장올 도모하기 위하여 성장 온도를 증가시키지만 본 실험에서는 낮은 성장 온도에서도 결정성의 향상 및 l later빼 성장을 촉진시킬 수 있었으며 이는 저온 성장법에 의한 고품위의 GaN 에피택시 충 성장에 대한 가능성올 제시하는 것이다.

• Journal of the Korean Vacuum Society
• /
• v.17 no.2
• /
• pp.81-89
• /
• 2008

Atomic behavior during ion beam sputtering was investigated by using classical molecular dynamics simulation. When Ar ion bombards on Au and Pd(001) surface with various incidence energies and angles, some atoms which gained substantial energy by impacting Ar ion were sputtered out and, simultaneously, others were landed on the surface as if surface atoms were redeposited. It was observed that the redeposited atoms are five times for Au and three times for Pd as many as sputtered atoms irrespective of both incidence energy and angle. From sequential ion bombarding calculations, contrary to the conventional concepts which have described the mechanism of surface pattern formation based only on the erosion theory, the redeposition atoms were turned out to play a significant role in forming the surface patterns.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.213-216
• /
• 2009

WGS(Water Gas Shift)반응은 일산화탄소(CO)를 이산화탄소($CO_2$)로 전환하는 반응으로 일체형 수소생산시스템의 실현을 위한 고순도 수소생산에 있어서 중요한 단계이다. WGS 반응은 열역학적 평형을 고려하여 고온전이반응(HTS: High Temperature Shift)과 저온전이반응(LTS: Low Temperature Shift) 두 단계 반응으로 진행된다. 두 단계 공정의 통합을 위해 낮은 온도에서 높은 활성을 갖는 WGS 반응용 촉매 개발이 필요하다. 최근 낮은 온도에서 높은 활성을 갖는 귀금속 촉매에 다양한 담체를 적용시킨 연구가 활발히 진행되고 있다. 선행 연구 결과, Ce-$ZrO_2$ 구조는 Ce/Zr 비에 따라 다양한 특성 변화를 관찰하였다. 따라서 낮은 온도에서 높은 활성을 갖는 WGS 반응용 촉매 제조를 위해 환원성 담체인 $CeZrO_2$에 Pt 을 담지시켜 성능을 평가하였다. 제조된 모든 담체는 공침법(Co-precipitation)으로 제조 하였으며 $500^{\circ}C$에서 6시간 소성하였다. 제조된 담체에 백금(Pt)을 함침법(Incipient Wetness Impregnate)으로 담지시켰다. 특성분석은 BET를 이용하여 표면적을 측정하였다. 촉매 반응 실험조건은 $200^{\circ}C{\sim}400^{\circ}C$ 온도범위에서 기체공간속도(GHSV: Gas Hourly Space Velocity) 45,000 ml/$h{\cdot}g-cat$ 으로 혼합가스($H_2$:60%, $N_2$:20%,$CH_4$:1%,CO:9%,$CO_2$:10%)를 흘려 반응 후 배출되는 가스를 Micro-Gas Chromatography 를 이용하여 측정하였다.

• New & Renewable Energy
• /
• v.10 no.2
• /
• pp.12-18
• /
• 2014

The objective of this work is to produce solid biofuel from sawdust using the HTC (Hydrothermal carbonization) process. The HTC process of feedstock involves the raw material coming into contact with high temperature and pressurized water. The HTC process could produce gaseous, liquefied and solid products, but this study focused on solid product only as an alternative to coal. In this study, sawdust used for a feedstock and its moisture content was under 5%. Water was added with the feedstock to raise moisture content to 80% and also used catalysts. The HTC process was performed at temperature range from 200 to $270^{\circ}C$ and reaction time was 15 to 120 min. Rising temperature resulted in increasing the higher heating value (HHV) of HTC product. In case of adding catalyst, HHV of solid biofuel was higher and reaction occurred at lower temperature and pressure. Also, HTC solid product had been characterized and found to be hydrophobic, increased HHV (over 40%), and pelletized easily compared to raw material.