• Korean Journal of Optics and Photonics
• /
• v.5 no.2
• /
• pp.266-271
• /
• 1994

The output power and the energy of Rh-6G dye laser were enhanced by the mixture of Rh-560 dye whose fluorescence spectrum was coincident with the absorption spectrum of Rh-6G. The argon filled coaxial flashlamp used for pulsed pumping and argon laser for CW pumping. The concentration of Rh-6G dye was optimized in each pumping method before Rh-560 dye was mixed in Rh-6G dye solution. In the coaxial flash lamp pumped Rh-6G laser the output energy was increased about 30% when Rh-560 was mixed at 1% of Rh-6G concentration. In the case of argon laser pumping with multiline, the output power was increased 18% at the concentration of 2.5%. In the single line laser pumping, the output power was enhanced more efficiently. The power enhancements were 72% and 88% when the pumping wavelengths were 488 nm and 514.5 nm respectively. ively.

• Journal of Hydrogen and New Energy
• /
• v.27 no.4
• /
• pp.421-430
• /
• 2016

To prepare mesophase pitches through low energy process, pyrolysis fuel oil with $AlCl_3$ has been modified using two-step heat treatment which is heat-treated at $330^{\circ}C$ for 3~5 h after pre-treatment at $250^{\circ}C$. The result of polarized optical microscope observation, mesophase is not observed in pitches carried out only pre-heat treatment. While mesophase content is significantly increased from 9% to 100% according to increasing secondary heat treatment time from 3 h to 5 h. Synthesizing of the mesophase pitch at low temperature of $330^{\circ}C$ is attributed to decrease of viscosity of the pitches carried out first heat treatment with $AlCl_3$. The result of Fourier-transform infrared spectroscopic analysis, it is expected that aromatization of aliphatic compounds is dominant at early secondary heat treatment, on the other hand, polycondensation reaction becomes dominant as secondary heat treatment time increases. Aromaticity and stacking height of the pitches secondary heat treated for 5 hours are more increased about 25% and 107%, respectively, than that of pitches carried out only first heat treatment.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.12
• /
• pp.736-748
• /
• 2003

Dynamic voltage scaling(DVS), which adjusts the clock speed and supply voltage dynamically, is an effective technique in reducing the energy consumption of embedded real-time systems. The energy efficiency of a DVS algorithm largely depends on the performance of the slack estimation method used in it. In this paper, we propose novel DVS algorithms for periodic hard real-time tasks based on an improved slack estimation algorithm. Unlike the existing techniques, the proposed method can be applied to most priority-driven scheduling policies. Especially, we apply the proposed slack estimation method to EDF and RM scheduling policies. The experimental results show that the DVS algorithms using the proposed slack estimation method reduce the energy consumption by 20∼40 % over the existing DVS algorithms.

• The KIPS Transactions:PartB
• /
• v.13B no.3 s.106
• /
• pp.323-328
• /
• 2006

Proteins in a cell appear as spots in a two dimensional gel image which is used in protein analysis. The spots from the same protein are in near position when comparing two gel images. Finding out the different proteins between a normal tissue and a cancer one is important information in drug development. Automatic matching of gel images is difficult because they are made from biological experimental processes. This matching problem is known to be NP-hard. Neural networks are usually used to solve such NP-hard problems. Hopfield neural network is selected since it is appropriate to solve the gel matching. An energy function with location and distance parameters is defined. The two spots which make the energy function minimum are matching spots and they came from the same protein. The energy function is designed to reflect the topology of spots by examining not only the given spot but also neighborhood spots.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.1
• /
• pp.9-14
• /
• 2009

A numerical investigation was performed based on the Reynolds-Averaged Navier-Stokes(RANS) equations for the two-dimensional unsteady flow around a vertical axis turbine(VAT) with three or four blades. VAT is one of the promising devices for tidal current energy conversion. The geometry of the turbine blade was $NACA65_3$-018 airfoil, for which CFD analysis using Fluent was carried out at several angles of attack and the results were compared with the corresponding experimental data for validation and calibration. Then CFD simulations were carried out for the whole vertical axis turbine with a two-dimensional setup. The CFD simulation demonstrated the usefulness of the method to study the typical unsteady flows around VATs and the results showed that the optimum turbine efficiency could be achieved for carefully selected combinations of the number of blade and Tip-Speed Ratio(TSR).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.1
• /
• pp.115-122
• /
• 1996

One of the most laborious work in rice farming is transplanting of rice seedling which has been required preparation of nursery bed and care of seedling during one month period. In this research, direct seeding in dry paddy(DS) and direct seeding in wet paddy(WS) were practiced to compare with traditional transplanting(TP) in Suwon. Growth stages in direct seeding were delayed as its planting time was about 21 days later than those of TP. Heading stage of direct seeding at Suwon was delayed about 9 days as compared to transplanting culture. Rice yield was not different between the seeding practises. Working-hour saving was about 17％(DS) and 28％(WS). Production cost of direct seeding was decreased 20％(DS) and 32％(WS), respectively. Amount of rice production per a unit working-hour in direct seeding could increase 14％(DS) and 39％(WS) compared to that of TP, respectively. Therefore, direct seeding could save significantly working hour and production cost without reducing rice yield. WS was more effective than DS in saving labor and production cost. Direct seeding was not efficient method in input of farming energy and agricultural chemicals.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.2
• /
• pp.223-232
• /
• 2013

In this study, carbon emissions and energy consumption were evaluated to establish a design strategy which has low energy consumption and carbon emission production, by using life cycle energy (LCE) and life cycle $CO_2(LCCO_2)$ calculation methods in life cycle management(LCM) tools. After improvement design projects, the energy consumption and $CO_2$ emission were calculated and compared in three sewage treatment plants (STPs), which are A STP, B STP, and C STP. The reduction of carbon emissions was 28,020.1 ton $CO_{2-}e/yr$, 37,399.6 ton $CO_{2-}e/yr$ and 8,788.3 ton $CO_{2-}e/yr$, respectively. Production of energy was 792 TOE/yr, 1,235 TOE/yr and 1,023 TOE/yr, respectively. As a result, the estimation of energy and energy self-sufficiency was 5.1 %, 14.5 % and 23.5 %, respectively. The result of this study shows the LCM can be contributed to establish strategy for energy and carbon emission reduction in sewage treatment plants.

• Journal of Internet Computing and Services
• /
• v.11 no.4
• /
• pp.33-39
• /
• 2010

In this paper, a data dissemination protocol that transmits data collected for Wireless Sensor Networks (WSNs) is newly proposed, and the proposed proactive protocol takes into account energy consumption minimized and delay time disseminated. The well-known SPMS (Shortest Path Mined SPIN) forms the shortest path-based routing table obtained by Bellman Ford Algorithm (BFA) and disseminates data using a multi-hop path in order to minimize energy consumption. The mentioned properties of SPMS cause memory burden to create and maintain the routing tables. In addition, whenever BFA is executed, it is necessary to suffer from the energy consumption and traffic occurred. In order to overcome this problem, a proactive dissemination protocol using Residual Energy and Signal Strength, called RESS, is proposed in this paper. Simulation results show that RESS outperforms SPMS up to 84% in terms of the number of traffic messages and the transmitted delay time of RESS is similar to that of SPMS using the shortest path.

• Journal of Internet Computing and Services
• /
• v.14 no.5
• /
• pp.39-48
• /
• 2013

A cloud system has to deal with highly variable workloads resulting from dynamic usage patterns in order to keep the QoS within the predefined SLA. Aside from the aspects regarding services, another emerging concern is to keep the energy consumption at a minimum. This requires the cloud providers to consider energy and performance trade-off when allocating virtualized resources in cloud data centers. In this paper, we propose a resource provisioning approach based on dynamic thresholds to detect the workload level of the host machines. The VM selection policy uses utilization data to choose a VM for migration, while the VM allocation policy designates VMs to a host based on its service reputation. We evaluated our work through simulations and results show that our work outperforms non-power aware methods that don't support migration as well as those based on static thresholds and random selection policy.

• Solar Energy
• /
• v.16 no.2
• /
• pp.49-63
• /
• 1996

Site elavation is one of the major factors which is influencing the incoming insolation. Because nonpermanent gases like ozone, water vapor are unmixed components of the atmosphere and their concentrations are function of height, the site elevation effects the relative proportion of the atmospheric constituents. We have measured solar radiation on Sobaek(1,350m) and in Poonggi area(280m). These values were compared to investigate the their charateristics and the potential for the solar utilization as an alternative energy for both high altitude area and low altitude area. From the results, we conclude that 1) Yearly mean 4,093 $kcal/m^2$. day of the horizontal global radiation in Mt. Sobaek was evaluated for clear day. 2) Insolation on Mt. Sobaek is $6{\sim}7%$ higher than Poonggi area during summer and winter seasons. 3) A significant difference of atomospheric clearness index is observed between Mt. Sobaek and Poonggi area at the same latitude.