• Tunnel and Underground Space
• /
• v.15 no.4 s.57
• /
• pp.305-315
• /
• 2005

DDA (Discontinuous Deformation Anlaysis) is one of the latest numerical analysis which has merits of both FEM and DEM. In this research a new edge-to-edge contact algorithm was applied on DDA. With adoption of new edge-to-edge contact state definition, sub-algorithm was improved about open-close iteration, contact state judge, contact detecting, and friction forces acting on joints. Newly applied DDA was verified based on two different cases. The DDA results show good agreement with numerically predicted one.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.6
• /
• pp.249-253
• /
• 2010

After the specimen of A-site defect perovskite $La_{1/3}NbO_3$ single crystal was manufactured, the dielectric properties were studied between the temperature range of 10 and 800 K. The dielectric anomaly appeared at 50 K and 650 K, and, at about 650 K, the thermal hysteresis of dielectric constant was shown. The ac-conductivity of bulk showed the lowest activation energy of 0.43 eV at 560~690 K. Based on the results, it is assumed that the dielectric anomaly at 50K and 650 K was due to the antiparallel shift of $Nb^{5+}$-ion and the rearrangement of $Nb^{3+}$-ion, respectively.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1998.11a
• /
• pp.30-39
• /
• 1998

음양오행의 오행에 해당하는 화, 수 목, 금, 수를 원동력의 물리적 개념에 입각하여 5가지의 성격을 가진 에너지 또는 힘으로 정의하였다. 이 정의에 기초하여 사람의 얼굴 형상, 기본적인 성격, 병든 성격 등 체질, 감정, 건강에 관계된 100개 이상의 문항을 가진 설문지를 완성하였다. 설문지의 구성은 오행의 화, 수, 상, 금, 수 5 분야와 더불어 생명력을 나타내는 상화를 포함 6개 분야로 구성되었으며 각 분야에는 각각 20여 개의 문항을 만들었다 구체적으로 각 오행에 해당하는 장부가 크거나 좋을 때 나타날 수 있는 기본적인 성격과 부정적인 성격을 파악하는 질문으로 10문제를 만들었으며 다른 10문제에는 해당장부가 나쁠 때 나타날 수 있는 육체적/정신적 증상을 묻는 문제를 제시하였다. 그리고 마지막 2∼3문제는 정신적으로 광적인 증세를 묻는 총 130여 문항으로 구성하였다 설문지 평가 결과 스스로 성격진단, 섭생이나 인, 의, 예, 지 실 덕목의 연관관계, 직장에서 인적 자원 배치와 함께 산업안전과의 연관관계 등을 구체적으로 나타내었다. 제한된 평가결과 비교적 사람의 체질이나 성격 등을 잘 파악하였으나 교육이나 유전 또는 사주에 의한 특성이 강할 때는 예외성을 나타내는 것으로 생각되었다.

• Science of Emotion and Sensibility
• /
• v.9 no.4
• /
• pp.385-394
• /
• 2006

In the present society where aesthetic designs would have product value, designs must be the ones that add flexible sensation as well as the energy of counteraction which escapes from and destroys existing concept. The 'creative expression' to reach such design objectives is one of the most important abilities which designers must possess and is an overall concept in problem solving of designing which participates in formative approach or image development as well as product concepts such as function or performance . In this research, the definition of creativity, environmental change of designing, conditions designers must possess followed by these things and creative design expressions researched in the past, etc are examined and by presenting design method for creative designing concept targeting mobile phones, it will attempt to contribute in the importance of creativity and improve creative value of designers.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.4
• /
• pp.9-15
• /
• 2013

An oxidized starch ester was prepared and used for surface sizing. Esterification of starch decreased both Brookfield viscosity and Brabender viscosity substantially even though the solids level was increased by 2% from 14% to 16%. Surface sizing with the esterified starch gave better performance in tensile strength, stiffness and compressive strength than surface sizing with oxidized starch in the laboratory. Advantages in strength improvement, however, were not obtained when it was applied in commercial papermaking process. This was attributed to the fact that the influence of starch types has been nullified by high pressure penetration that occurs in the commercial papermaking process. Drying energy consumption, however, decreased by 3.3% by substituting the low solids oxidized starch with a high solids starch ester.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.1
• /
• pp.8-13
• /
• 1990

The microscopic relaxation parameters for the single crystal were measured by using thermally stimulated depolarization (TSD). Initial rise method, various heating rate method and total glow peak method were used for the determination of the activation energy and Debye relaxation time from TSD glow curves. Activation energy, pre-exponential factor and relaxation time for impurity-vacancy dipole reorientation were 0.55eV, 1.97$\times$10 super(-12) sec and 12.19sec in average, respectively. Dielectric dissipation factor for the crystal was calculated from the measured TSD glow curve, its value being about 3$\times$10 super(-2).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.109-109
• /
• 2011

1T-1C로 구성되는 기존의 DRAM(Dynamic Random Access Memory)은 데이터를 저장하기 위한 적절한 capacitance를 확보해야 한다. 따라서 캐패시터 면적으로 인한 집적도에 한계에 직면해있다. 따라서 이를 대체하기 위한 새로운 DRAM인 1T (Transistor) DRAM이 각광받고 있다. 기존의 DRAM과 달리 SOI (Silicon On Insulator)기술을 이용한 1T-DRAM은 데이터 저장을 위한 캐패시터가 필요없다. Impact Ionization 또는 GIDL을 이용해 발생한 정공을 채널영역에 가둠으로 서 발생하는 포텐셜 변화를 이용한다. 이로서 드레인 전류가 변화하며, 이를 이용해 '0'과 '1'을 구분한다. 기존의 1T-DRAM은 단결정 실리콘을 이용하여 개발되었으나 좀더 광범위한 디바이스로의 적용을 위해서는 다결정 실리콘 박막의 형태로 제작이 필수적이다. 단결정 실리콘을 이용할 경우 3차원 집적이나 기판재료선택에 제한적이지만 다결정 실리콘을 이용할 경우, 기판결정이 자유로우며 실리콘 박막이나 매몰 산화층의 형성 및 두께 조절이 용이하다. 때문에 3차원 적층에 유리하여 다결정 실리콘 박막 형태의 1T-DRAM 제작이 요구되고 있다. 따라서 이번연구에서는 엑시머 레이저 어닐링 및 고상결정화 방법을 이용하여 결정화 시킨 다결정 실리콘을 이용하여 1T-DRAM을 제작하였으며 메모리 특성을 확인하였다. 기판은 상부실리콘 100 nm, buried oxide 200 nm로 구성된 SOI구조의 기판을 사용하였다. 엑시머 레이저 어닐링의 경우 400 mJ/cm2의 에너지를 가지는 KrF 248 nm 엑시머 레이저 이용하여 결정화시켰으며, 고상결정화 방법은 $400^{\circ}C$ 질소 분위기에서 24시간 열처리하여 결정화 시켰다. 두가지 결정화 방법을 사용하여 제작되어진 박막트랜지스터 1T-DRAM 모두 kink 현상을 확인할 수 있었으며 메모리 특성 역시 확인할 수 있었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.8
• /
• pp.581-588
• /
• 2020

The aging characteristics of exploding foil initiator (EFI) are studied. In order to observe the aging characteristics, the main components of the exploding foil initiator were classified and the failure mechanism was defined. The aging characteristics were defined in terms of power and sensitivity, and the accelerated aging test plan was established based on the activation energy calculated by HFC (Heat Flow Calorimetry) and Arrhenius theory. The performance variation was observed using the sensitivity test (Neyer test) and power test (Dent test) for the aged samples. The aging characteristic was observed on the mean exploding point of the sensitivity test, but long-enough life span was predicted considering the related specification.

• Applied Chemistry for Engineering
• /
• v.5 no.4
• /
• pp.637-645
• /
• 1994

The LDPE films were photolyzed for 100 hours in UV apparatus with 400-W medium pressure mercury lamp radiating wavelengths longer than 254nm. A simple kinetic model was introduced and was applied to interpret the FT-IR absorbance of carbonyl and hydroperoxide bonds as a function of UV exposure time. From these data, the reaction mechanism and the rate determining step of photodegradation were determined.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.04a
• /
• pp.393-398
• /
• 2008

The environment is the important resource to use as well as to conserve for the development. Since 1990s, it has accentuated the importance of the environment and tried to conserve the environment in many areas. Among many area, the building industry has played a role to destruct the environment for providing the living decent space and brought the environmental affect. Therefore, the building industry should endeavor to mitigate the environmental affect. In building life cycle, it consumes the energy and natural resources. But it is difficult to evaluate the environmental affect during the whole building life. It is impossible to calculate the environmental affect without the much time and effort. Therefore. it requires the easy and handing program to calculate the affect to environment in each building life cycle. Until now, many program for assessing the affect to the environment have been developed and limitedly used because of the assessment scope and contents. In this paper, it aimed at developing the assessment program of LCA, focused on the energy consumption and carbon-dioxide emission compared with the domestic and foreign concerned programs. The developed program is divided into 3 areas; construction, maintenance, demolition.