• 한국태양에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.400-403
• /
• 2009

Current wind turbine units that are used primarily 3Blade type devices or large-scale wind-term capacity of 2MW of 60m~90m Blade diameter is applied. This is not the best suitable design with the designing condition for the special quality of wind condition in the South-West Coastal Areas of Korea where the wind speed frequency of average wind speed and over 10m/s high wind velocity is fairly low. For this matter, in this dissertation, the expecting generation amount of electric power is measured excluding a mechanical moment, considering wind power energy traveling to the Blade when 60m~120m blade is applied, based on 2MW wind generator. Also, we would like to propose the Blade diameter which is fitted by wind condition of South-West Coastal Areas of Korea.

• Journal of Hydrogen and New Energy
• /
• v.26 no.5
• /
• pp.393-401
• /
• 2015

The characteristics of diesel and biodiesel are similar like as cetane number and auto-ignition temperature. High cetane number of diesel and BD could make possible to compression ignition. but BD showed different atomization from diesel due to component like density, viscosity and iodine value etc. Because of this, the biodiesel requires validation. This study using diesel and BD20 investigated effect to durability injector. Durability test were used common rail and bosch solenoid type 5-hole injector. Total test was 672hr but actual running time was 200hr. Spray experiments for spray characteristics were carried out using constant volume combustion chamber. Spray characteristics of diesel and BD showed different result up to durability test time. After 100hr, diesel showed spray shapes were stable but BD was not. After 200hr, difference of diesel and BD spray shapes were grow serious.

• Journal of Hydrogen and New Energy
• /
• v.27 no.2
• /
• pp.163-168
• /
• 2016

Korea has been developing nuclear fusion fuel storage and delivery system (SDS) technologies including a basic scientific study on hydrogen storage. To develop nuclear fusion technology, it is necessary to store and supply hydrogen isotopes needed for Tokamak operation. SDS is used for storing hydrogen isotopes as a metal hydride form. The rapid hydriding of tritium is very important not only for safety reasons but also for the economic design and operation of the SDS. In this study, we designed and fabricated a medium-scale getter bed of depleted uranium (DU). The hydriding of DU has been measured by varying the initial temperature ($100-300^{\circ}C$) of the DU getter bed to investigate the influence of the cooling temperature. Furthermore, we analyzed the effect of a helium blanket on the hydriding performance with 0 - 12% helium content in hydrogen.

• Journal of Hydrogen and New Energy
• /
• v.30 no.6
• /
• pp.479-484
• /
• 2019

Environmental problems were related to human life from second industrial revolution. Recently, peoples are interested in solving global warming problem and improving air quality. Therefore, we request for eco-friendly vehicles such as fuel cell electric vehicles using eco-friendly hydrogen energy. In order to reduce particulate matter in Korea, we have established a plan to promote the deployment of eco-friendly vehicles. In this paper, we analyzed the average monthly charging status and hydrogen consumption by introducing fuel cell bus.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.57-60
• /
• 2005

자연채광은 실내공간의 쾌적성을 향상시키며, 재실자의 건강을 증진시킬 뿐만 아니라 에너지 절약적인 측면에서 시너지 효과를 발휘하고 있다. 이에 반사거울형 태양광채광시스템은 도시가 과밀하고 고층화됨에 따라 자연채광의 도입이 어려운 실내공간에 태양광을 도입할 수 있는 자연에너지 활용장치라 할 수 있다. 본 연구는 태양광채광시스템을 이용하여 주거건물 옥상에 1차반사거울을 설치하고, 반지하의 상부에 2차반사거울을 설치하여 거실공간에 태양광을 유입하였다. 시스템 미설치시와 설치시에 대한 거실의 바닥면조도와 외부조도를 동시에 측정하여 외부조도에 대한 내부조도의 비율인 주광조도비를 분석하고, 증감율을 구하여 반사거울형 태양광채광시스템의 성능을 평가하였다. 채광성능평가 결과 채광시스템의 설치로 인한 실내 주광조도비는 평균 $80{\sim}1,400%$정도 증가하는 것으로 나타났으며, 또한 창면부에 비해 실의 후면부가 2배 이상 증가한 것으로 나타나 채광성능이 매우 큰 것으로 나타났다. 따라서 본 연구에서 실험한 반사거울형 태양광 채광시스템은 주거건물에서의 적용이 용이하고 높은 채광성능을 제공할 수 있어 실내 빛환경 향상에 크게 기여할 수 있을 것으로 기대된다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.5 no.1
• /
• pp.11-18
• /
• 2002

Directional breaking waves are generated by the component wave focusing both in direction and frequency based on constant wave steepness and constant wave amplitude spectrum models. The generated breaking waves are classified in the incipient, single and multi breaking waves. The characteristics of directional breaking waves are investigated in terms of surface profile parameters of wave crest steepness and asymmetry. The evolution of breaking wave characteristics is analyzed in a view of focusing efficiency. It shows that the front steepness and vertical asymmetry play an important role in breaking process, while the crest rear steepness and horizontal asymmetry are nearly constant during the process. The superposition of directional components greatly enhances the focusing efficiency and it suggests that characteristics of directional breaking waves may significantly different from uni-directional ones.

• Journal of Energy Engineering
• /
• v.8 no.4
• /
• pp.576-582
• /
• 1999

this paper presents the results of experiments on subsooling degree characteristics which was analyzed in accordance with various test conditions. The test water was cooled below freezing point temperature, was measured. The results showed that using city water as the test water in pyrex tube indicated small standard deviation (SD) compared to using distilled water, and minimum subcooling degree was 6.9$^{\circ}C$ and 6.2$^{\circ}C$, respectively. In addition, a critical subcooling degree in a pyrex tube was larger than that in a stainless steel tube about 0.7$^{\circ}C$ for the same test water. It was also observed that the standard deviation of data for the distilled water showed decreasing tendency aw the increasing with cooling velocity. Then metaldehyde showed a considerable effect on the subcooling degree of distilled water as the ice nucleating substance with increase of test number.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.471-478
• /
• 2002

초음파를 사과의 비파괴 품질판정에 이용하기 위한 기초연구로서 계측된 저장기간에 따른 사과의 초음파 특성과 본 연구에서 계측된 사과의 기계적 특성을 이용하여 초음파에 의한 사과의 탄성계수 및 생물체항복강도 예측모델을 개발하고자 하였으며, 결론은 다음과 같다. 1. UTM을 이용하여 사과의 기계적 특성치를 분석하여 생물체항복점, 생물체항복변형량, 생물체항복강도, 파괴점, 극한변형량, 극한강도 및 탄성계수 등을 구하였다. 2. 사과의 기본 물성, 초음파 특성과 기계적 특성값 들을 분석한 결과 사과의 질량, 체적, 시간영역의 진폭(PTP), 제3영역 에너지 스펙트럼 밀도함수가 기계적 특성 중 생물체항복강도, 탄성계수와 높은 상관성이 있는 것으로 나타났다. 3. 사과의 저장 기간, 질량, 체적, Peak-to-peak, 제3영역의 에너지값 등 5개의 독립변수를 가지는 다중선형회귀모형으로 사과의 탄성계수 및 생물체 항복강도 예측모형을 개발하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.2
• /
• pp.148-153
• /
• 2018

In this study, the nonlinear time history analysis of seismic retrofitted structures with TS damper for seven ground motion records was conducted for the purpose of verifying the seismic strengthening effect of TS seismic retrofitting method. Through comparison of the interstory drift ratio and the energy dissipation amount of the non - reinforced structure obtained and those of retrofitted structures with TS damper from the nonlinear time history analysis, the interstory drift ratio was reduced by about 30% and the amount of energy dissipation through the structure was halved. As a result, it was confirmed that the damping performance of the TS seismic retrofitting method is excellent.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.26 no.1
• /
• pp.63-71
• /
• 2020

Purpose : The purpose of this study is to analyze the elements that affect the energy consumption of general hospitals in Korea. Methods : Factors affecting energy consumption in general hospitals include facility elements and operating elements. The effects of these elements on energy consumption of general hospitals were analyzed by statistical methods such as t-test, anova, correlation analysis, and regression analysis. Results : Total floor area, number of operating rooms, number of MRI, number of staffs, and number of outpatients can be said as useful variables that can explain energy consumption in general hospitals. Implication : It is possible to save energy consumption in general hospitals by adjusting major variables that affect the energy consumption of general hospitals.