• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.354-354
• /
• 2011

ZnO 나노와이어는 밴드 갭이 3.37 ev로 큰 밴드 갭을 갖는 물질이며 엑시톤 결합에너지가 60 meV로 GaN(25 meV)같은 다른 반도체보다 매우 크다. 또한 밴드갭 에너지가 큰 GaN, SiC와 같은 반도체에 비해서 화학적, 열적 안정성이 크며 낮은 온도에서 성장이 가능하다는 장점이 있다. 본 연구에서는 pre-heating process를 이용하여 1차원 구조인 ZnO nanowire를 수열합성법으로 합성하였다. 실험방법으로는 E2K glass 기판위에 AZO40 nm를 증착후, 시드층으로 이용하여 ZnO nanowire를 성장하였다. precusor 전구체에는 ZN(NO3)2 ${\cdot}$ 6H2O와 Capping agent으로의 역할을 위해 PEI와 OH-source 공급을 위한 Ammonium chloride를 첨가하여 합성하였고, 그에 따른 ZnO nanowire의 morphology 및 aspect ratio를 조절하고자 하였다. 마지막으로 ZnO 나노와이어의 구조적, 광학적 특성 평가를 하기위해 XRD, FE-SEM, PL 등을 이용하여 측정 하였고, 향후 나노발전기, 태양전지 등 여러 광학기기 등에 전극재료로서 응용 가능성에 대해 알아보고자 하였다.

• Journal of Energy Engineering
• /
• v.28 no.4
• /
• pp.19-28
• /
• 2019

A study has been done on the three dimensional turbulent flow characteristic near the porous wall. The porous holes are considered by penetrating the wall in regular arrangement, and porosity is controlled by diameter of holes. Flow characteristics near the three dimensional porous wall are compared with field test results and self-generated experimental results. FLUENT is employed for computational analysis on the effect of three dimensional porosity with flow and pressure characteristics. As a result, drag coefficient is defined and compared for three dimensional effect. The drag coefficient is mostly a function of porosity, whereas the effect of Reynolds number is minimal, and its correlation is presented in terms of three dimensional porosity.

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.399-408
• /
• 2014

신약을 개발하거나 단백질 구조를 예측하는데 Molecular Mechanics (MM)의 방법을 사용한다. 하지만, MM 만으로는 자연현상에서 일어나는 결과를 정확하게 기술하기 어렵다. 본 연구는 기존의 MM 방법으로는 정확히 예측이 불가능한 비 공유결합 중 하나인 ${\pi}-{\pi}$ interaction을 양자역학 계산을 통해 정확한 예측이 가능한지 알아보았다. ${\pi}-{\pi}$ interaction이란 생채 내, 의약 화합물에서 발견되는 결합이기 때문에, 단백질과 결합하는 구조의 예측에 중요하다고 할 수 있다. 본 실험은 ${\pi}-{\pi}$ interaction을 갖는 Sandwich, T shape, 그리고 Parallel displaced 세 가지 모형과 각각의 모형 아래에 분자를 하나 더 쌓은 모형을 추가하여 양자역학 재산을 수행하였다. 양자역학 계산은 DFT의 세가지 함수 M06_2X, M05_2X, B3LYP를 이용하였다. 실험결과에서 세 가지 함수가 각기 다른 결과를 보였는데, 상대적으로 B3LYP의 경우에는 세가지 모델에서 모두 제대로 된 에너지 변화를 계산하지 못하였으며, M06_2X와 M05_2X의 결과에서는 거리에 따른 ${\pi}-{\pi}$ interaction 에너지의 변화를 정확하게 계산하였다. 이러한 결과를 바탕으로, 양자역학의 방법을 통해 MM에서는 예측이 불가능한 ${\pi}-{\pi}$ interaction을 계산 할 수 있고 이 부분을 고려하여 화합물 간의 결합구조를 예측을 향상시킬 수 있다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.5
• /
• pp.125-133
• /
• 2011

The wear of rubber track being in contact with the road surface is an important subject because it decreases the traction performance and the operating efficiency of tracked vehicle. For the above reasons, many attempts have been made to quantitatively calculate the rubber track. However, it depends on the experimental methods which are highly time- and cost-consuming. Therefore, the numerical simulation approach is highly desirable, but it needs to model the complex geometry and the material behavior in details as well as the interaction with the road surface. In this study, the rubber track and its material behavior are elaborately modeled since these factors are very important in the prediction of the wear rate of the rubber track. Accordingly to the studies on the rubber wear by previous investigations, it has been found that the wear is greatly influenced by the frictional energy. The frictional energy of rubber track is computed by utilizing the 3D finite element analysis of the rubber track, and the wear rate is evaluated making use of the frictional energy and a wear model.

• Journal of Hydrogen and New Energy
• /
• v.15 no.4
• /
• pp.266-273
• /
• 2004

The objective of this study is an understanding of stress corrosion cracking of metals that is recognized to mostly limit the lifetime of the structural materials by comparing the features of delayed hydride cracking of zirconium alloys with those of stress corrosion cracking (SCC) of Ni-based alloys and hydrogen cracking of stainless steels. To this end, we investigated a dependence of delayed hydride cracking (DHC) velocity on the applied stress intensity factor and yield strength, and correlated a temperature dependence of the striation spacing and the DHC velocity. We reviewed a similarity of the features between the DHC of zirconium alloys, the SCC of Ni-based alloys and turbine rotor steels, and the hydrogen cracking of stainless steels and discussed the SCC phenomenon in metals with our DHC mode.

• Journal of Hydrogen and New Energy
• /
• v.18 no.1
• /
• pp.67-74
• /
• 2007

고효율의 실현이 가능한 흡기관 분사식 수소기관의 역화 억제 가능성을 파악하고자 밸브 오버랩 기간의 변화에 따른 제반 기관성능과 역화가 발생되는 역화한계 당량비를 실험적으로 해석하였다. 실험에는 기계식 연속 가변밸브 타이밍 시스템이 부착된 연구용 수소기관을 사용하였다. 밸브 오버랩기간은 배기밸브 개폐시기를 고정하고 흡기밸브 캠의 위상각을 조절하여 변화시켰다. 해석결과 밸브 오버랩 기간의 감소에 따른 제반기관성능은 통상의 기관과 유사하지만 역화한계 당량비가 확장되어 초기 단계이지만 수소기관의 역화발생에 밸브오버랩 기간이 관여하는 것이 보였다. 기관 회전수 1600 rpm, WOT의 실험 조건에서 밸브 오버랩 기간을 $20^{\circ}CA$에서 $0^{\circ}CA$로 감소시킨 경우 역화한계당량비는 약 45% 정도 확장되고 정미 토크는 16% 감소했다.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.5
• /
• pp.11-22
• /
• 2014

It is usual to determine silver-town location by people's experienced knowledge or intuition considering many different type of thematic variables simultaneously. This paper is primarily intended to locate sunny silver-town according to catchment-wide solar radiation as single key variable. GIS based solar simulation realistically identified catchment-wide solar radiation in the study area using large scale spatial precision. More than 90% over the worst catchment were identified shadow surfaces while the optimal catchment was heavily covered by sunny radiation surfaces. It is confirmed that standard GIS technology can offers the viable method of measuring and comparing the catchment-wide solar radiation. Guidelines for a replicable methodology are presented to provide a strong theoretical basis for the standardization of factors involved in locating the sunny silver-town; delineation of catchment boundary, solar simulation, catchment-wide comparison etc. They could be used as an evidence to determine sunny catchment in comparison with other catchment, based solar simulation. It is anticipated that this research output could be used as a valuable reference to confirm the potential of introducing the new concept of "catchment specific solar radiation" to support more scientific and objective decision-making in the process of locating silver town.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.1
• /
• pp.15-20
• /
• 2017

The summer climate is very hot and humid in Korea. The humidity is an important factor in determining thermal comfort. Recently, the research for dehumidification device development has been attempted to save energy that is required for the operation of the current dehumidifiers on the market. Existing dehumidification systems have disadvantages such as wasting energy to drive a compressor. Meanwhile, dehumidification systems with membranes can dehumidify humid air without increasing the dry bulb temperature so it doesn't have to consume cooling energy. In this paper, the cooling energy savings was studied when a dehumidification system was applied in a model building instead of a chiller. The sensible heat load was almost the same result, but the latent heat load was decreased by 38.9% and the total heat load was decreased by 8.5%. As a result, electric energy used to drive the compressor in a chiller was saved by applying a membrane air-conditioning system instead.

• Nuclear Engineering and Technology
• /
• v.6 no.1
• /
• pp.9-13
• /
• 1974

The exciton emission spectra of CdS single crystals excited by electrons were measured at 80$^{\circ}$K as a function o: the wave length. The measured dissociation energy of exciton bound to neutral donor was 2.0 meV, compared to the corresponding theoretical value of 2.4 to 3.2 meV. An exciton bound to neutral donor and a longitudinal optical (LO) phonon may not interact, but a free exciton dissociated from a neutral donor and a LO phonon is expected to interact each other. Therefore the origin of the spectra consisting of interaction term was located at the spectrum consisting of a free exciton dissociated from a neutral donor (I$_2$d). From the analysis of the spectra the LO phonon energy of CdS was found to be 40.5 meV.

• Journal of the Korean Solar Energy Society
• /
• v.21 no.3
• /
• pp.33-41
• /
• 2001

This paper showed the a numerical analysis of the thermal and fluid flow in solar concentration absorber with tilt angle, and the purpose of this study is to obtain the optimum tilt angle of the absorber. The boundary conditions of a numerical model were assumed as flows : (1) The heat source is located at the center of absorber (3) The bottom wall is opened and adiabatic. (3) The top, right and left walls are cooled wall. The parameters for the numerical analysis are tilt angles and Rayleigh numbers i.e., tilt angle $\theta=0^{\circ},\;15^{\circ},\;30^{\circ},\;45^{\circ},\;60^{\circ},\;75^{\circ},\;90^{\circ}$ and 101 $\leq$ Ra $\leq$ 103. The velocity vectors and isotherms were dense at wall side and the heat source. The mean Nusselt number had a maximum value at $\theta=0^{\circ}$ and showed a low value as the tilt angles were increased. Finally, the decrease rate of mean Nusselt number was appeared small with tilt angle when Rayleigh numbers were increased.