• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.590-593
• /
• 2007

물을 함유한 공극 크기 6, 30, 100 nm의 실리카겔에 이산화탄소 및 메탄을 반응시켜 온도$0{\sim}4$ $^{\circ}C$, 압력 $15{\sim}40$ bar 의 범위에서 가스 하이드레이트 생성속도를 측정하였다. 공극 크기가 작아짐에 따라 특정 온도에서의 평형압력이 높아지는 열역학적 특성을 감안하여 통일한 압력차 (평형압력과 실험압력의 차)를 얻을 수 있도록 조건을 설정하였다. 이산화탄소의 경우 통일 온도에서 하이드레이트 생성속도는 일반적으로 압력이 높아짐에 따라 가속되는 것을 알 수 있었다. 단위 물 당 포집되는 이산화탄소의 양은 최대 1.0을 넘지 못하였다. 또한 하이드레이트 생성을 위해 필요한 유도시간 (induction time)이 2내지 8시간 수준으로 매우 길었다. 공업적인 하이드레이트 이용을 위해서는 빠른 생성속도가 필요한 만큼 유도시간을 단축, 없애기 위해 계면활성제로 황산 도데실 나트륨 (sodium dodecyl sulphate)이 첨가된 수용액을 이용하였다. 계면활성제가 포함된 수용액에서의 하이드레이트 생성은 유도시간이 사라져 매우 빠르게 바뀌었고, 포집되는 이산화탄소도 15% 정도 증가되었다. 메탄의 경우에는 공극 크기가 작아질수록 하이드레이트 생성속도 및 가스 포집도가 저하되는 결과를 보였다. 이산화탄소의 경우와는 다르게 유도시간이 나타나지 않았으며 비교적 높은 가스 포집도를 얻기 위해서는 평형압력과 실험압력의 차이가 최소 2.0MPa 이상이어야 했다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.505-510
• /
• 2007

Greenhouses should be heated during nights and co Id days in order to fit growth conditions in greenhouses. Ground source heat pump(GSHP) or geothermal heat pump system(GHPs) is recognized to be outstanding heating and cooling system. Horizontal GSHP system is typically less expensive than vertical GSHP system but requires wide ground area to bury ground heat exchanger (GHE). In this study, a horizontal GSHP system with thermal storage tank was installed in greenhouse and investigated as performance characteristics. In the daytime, heating load of greenhouse is very small or needless because solar radiation increases inner air temperature. The results of study showed that the heating coefficient of performance of the heat pump($COP_h$) was 2.9 and the overall heating coefficient of performance of the system($COP_{sys}$) was 2.4. Heating energy cost was saved 76% using the horizontal GSHP system with thermal storage tank.

• Journal of Hydrogen and New Energy
• /
• v.23 no.2
• /
• pp.150-155
• /
• 2012

Polymer Electrolyte Membrane Fuel Cell (PEMFC) stack power output is needed to be approximately 100 kW to meet the requirements of automotive applications. In order to secure the electric safety for drivers, passengers and mechanics, it is very important to understand phenomena of an electric insulation in a fuel cell vehicle. In this study, we studied the electric insulation properties and the insulation resistance of stack, system and vehicle in the field of fuel cell was estimated at the applied voltage of 500 V, respectively. Also we discussed the insulation factors such as the conductivity of coolant, the element of vehicle design and the intrinsic resistance of the vehicle components.

• Journal of Hydrogen and New Energy
• /
• v.23 no.2
• /
• pp.111-116
• /
• 2012

Na promoted Pt/$CeO_2$ catalysts with various Na amounts (1, 2, and 3wt%) have been applied to water gas shift reaction (WGS) at a gas hourly space velocity (GHSV) of 45515 $h^{-1}$. 1wt%Pt-2wt%Na/$CeO_2$ catalyst exhibited the highest WGS activity at $240^{\circ}C$ among the catalysts prepared in this study. In addition, 1wt%Pt-2wt%Na/$CeO_2$ catalyst showed relatively stable activity with time on stream. The high activity/stability of 1wt%Pt-2wt%Na/$CeO_2$ catalyst was correlated to its easier reducibility and higher oxygen storage capacity (OSC). As a result, 2wt% Na promoted Pt/$CeO_2$ can be a promising candidate catalyst for the single stage WGS, which requires high intrinsic activity at very high GHSV.

• Journal of Hydrogen and New Energy
• /
• v.24 no.5
• /
• pp.353-358
• /
• 2013

To develop preferential CO oxidation reaction (PROX) catalyst for small scale hydrogen generation system, supported Pt catalysts have been applied for the target reaction. The supports were systematically changed to optimize supported Pt catalysts. $Pt/Al_2O_3$ catalyst showed the highest CO conversion among the catalysts tested in this study. This is due to easier reducibility, the highest dispersion, and smallest particle diameter of $Pt/Al_2O_3$. It has been found that the catalytic performance of supported Pt catalysts for PROX depends strongly on the reduction property and depends partly on the Pt dispersion of supported Pt catalysts. Thus, $Pt/Al_2O_3$ can be a promising catalyst for PROX for small scale hydrogen generation system.

• Journal of Hydrogen and New Energy
• /
• v.28 no.6
• /
• pp.627-634
• /
• 2017

In this study, Material life cycle evaluation was performed to analyze the environmental impact characteristics of TiN-ZrCo membrane manufacturting process. Gabi was used as software. The Eco-Indicator 99 methodology was used to evaluate the 11 impact categories and the 10 impact categories using the CML 2001 methodology. Precursor TiN was synthesized by sol-gel method and zirconium was coated by ball mill method. The metallurgical, physical and thermodynamic characteristics of the membranes were analyzed by using Scanning Electron Microscope (SEM), Energy Dispersive X-ray (EDS), X-ray Diffraction (XRD), Thermo Gravimetry/Differential Thermal Analysis (TG/DTA), Brunauer, Emmett, Teller (BET) and Gas Chromatograph System (GP). As a result of the characterization and normalization, the environmental impacts of each category of impacts were GWP 100 years with the highest environmental impact of 99.9%.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.230.2-230.2
• /
• 2014

스퍼터링 공정은 보통 수백 eV로 가속된 이온에 의한 고체 타겟으로부터 입자의 방출로서 정의할 수 있다. 스퍼터된 입자는 열에너지보다 운동에너지가 크며 박막성장은 저에너지의 입자충격, 불활성 가스이온, 타겟부터 산란된 입자에 의하여 지배된다. 본 연구는 직경 2인치의 원형 Cr 타겟을 셔터를 닫고 예비 스퍼터링 할 때 셔터(SUS 304 0.1t)가 전자기력을 받아서 기계적으로 진동하는 현상을 규명하고자 하였다. 셔터의 하단부를 챔버의 중심축에 고정시켜서 타겟과 평행하도록 수 cm 떨어뜨려서 위치한 뒤 직류 마그네트론 플라즈마를 발생시켰을 때 DC power에 따라서 각각 움직임을 동영상촬영을 진행하였고, 셔터의 중심을 실로 매달아서 자유롭게 움직일 수 있도록 한 뒤 플라즈마가 발생했을 때 기계적인 움직임을 중점적으로 관찰했다. 움직임의 차이를 비교하기 위해서 셔터의 크기를 줄여가며 일정한 DC power에서 실험을 진행했고, 자세한 관찰을 위해서 초고속카메라(210 fps)로 짧은 순간의 변화를 비교했다. 실험조건은 5, 10 mTorr, DC power 30, 40, 50, 70, 100 W, Ar 30 sccm, 셔터의 크기 10, 20, 30, 40, 50, 60 mm로 실시했다. 압력이 낮아질수록, 셔터의 크기가 작을수록, DC power가 커질수록 움직임변화가 커졌고, 진동수가 빨라지는 것을 확인했다. F=qE=ma를 통해서 실험에서 촬영한 동영상을 근거로 거리측정을 통해 실험에서 얼마의 전기장이 인가되어 있는지 예측하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.923-924
• /
• 2012

Nuclear power is one of energy sources which has the safety and economic feasibility in supply. However, due to the recent disaster in Fukushima, Japan, the safety issue of nuclear power is now come to the fore again. For example, Germany and Italy they cancel some projects on nuclear power launching. In South Korea also, a lot of safety concerns are discussed and small and big accidents occur. Thus, this study suggests the supply chain management system based on RFID to improve safety and efficiency at the same time.

• Korean Journal of Cognitive Science
• /
• v.8 no.4
• /
• pp.55-62
• /
• 1997

We proposed a method for locating of mouth using deformable templates, described by a parameterized template. An energy function is defined which links, edges, peaks, valleys in image intensity to corresponding properties of the template. The template deforms itself by altering its parameter values to minimize the energy function. The minimized energy function's parameter values can be used as descriptors for the feature. We propose a method for locating mouth fast, accurately by limiting a range of parameters' value and getting initial value of parameters' by preprocessing.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.3
• /
• pp.65-73
• /
• 1989

Continuum formulations for the expressions of dynamic energy release rates and computational methods for dynamic stress intensity factors are developed for the analysis of dynamic fracture problems subjected to stress wave loading. Explicit volume integral expressions for instantaneous dynamic energy release rates are derived by modeling virtual crack extensions with the dynamic Eulerian-Lagrangian kinematic description. In the finite element applications a finite region around a crack-tip is modeled by using quarter-point singular isoparametric elements, and the volume integrals are evaluated for each crack-tip element during virtual crack extensions while the singularity is maintained. It is shown that the use of the present method is more reliable and accurate for the dynamic fracture analysis than that of other path-independent integral methods when the effects of stress waves are significant.