• Journal of Energy Engineering
• /
• v.25 no.3
• /
• pp.51-58
• /
• 2016

MLCC is key parts of many electronic products and mixer is used to make MLCC. Currently, non-contact mixer is increasingly used due to its many merits. In case of large capacity non-contact mixer, function of driving gear is important. In this study, therefore, in order to reduce manufacturing cost through optimal design of driving gear of large capacity non-contact mixer, study on shape optimization of driving gear without excessive design modification was performed. As the results, because safety factors of modification model were decreased about 3.0 ~ 3.5 times compared with those of model with robust design, the possibility for saving manufacturing cost was confirmed.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.44.1-44.1
• /
• 2010

레이저 가공기술은 공정 적용이 용이하고 응용 분야가 넓어 산업 전반에 걸쳐 널리 사용되고 있다. 특히, 태양전지 제조공정에서는 cutting, grooving, doping, ablation등의 분야에 활발하게 적용되고 있으며 최근에는 다양한 종류의 레이저를 기술을 이용하여 효율 향상과 원가 절감을 위해 많은 기관에서 활발하게 연구를 진행하고 있다. 본 연구에서는 실리콘웨이퍼에 특정 파장의 레이저를 조사하여 실리콘웨이퍼 표면의 용융과 고상화를 통해 구조적, 전기적 특성 변화를 확인하였다. Si wafer의 표면은 레이저 조사 조건에 의해 다결정화 하며 레이저의 power와 frequency, scan speed등을 조절하여 다결정 실리콘 영역의 형성 깊이를 조절 할 수 있다. 다결정화 된 부분의 구조적 특성은 SED과 XRD를 이용하여 측정하였으며, 전기적 특성은 면저항 측정을 통하여 실시하였다. 또한 이러한 특성을 이용하여 태양전지 제조 공정의 적용가능성을 평가하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.310-312
• /
• 2009

일반적으로 초산을 제조하기 위해 사용되는 CO를 생산하기 위하여 납사(Naptha)를 가스화하는 부분산화공정을 이용하거나 촉매를 사용한 Steam reforming공정을 적용하고 있다. 가스화 및 Steam reforming의 원료가 되는 납사는 고가이므로 폐기물의 가스화를 통해 발생하는 합성가스 내의 CO를 활용하여 초산제조의 원료로 사용할 수 있다면 초산제조 공정에서의 CO 제조 비용 절감 및 폐기물 자원화의 효과를 동시에 달성할 수 있을 것으로 생각된다. 본 연구에서는 폐기물의 가스화를 통해 발생한 합성가스 내의 CO에 대한 초산제조의 원료로의 적용가능성을 검토하기 위하여 폐기물의 종류 및 성상에 따른 CO 발생량을 비교하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.4
• /
• pp.21-26
• /
• 1999

Using daylight in underground spoce may significantly reduce electric lighting load and give a visually comfortable environment. This reper describes a fundaIrentaI study on light duct system to predict inter illuminance ratio on underground periIreter occupied zone level. As a result, integral equation for inter-reflection program are developed and by using optimize light duct system can gives daylight on deep underground space. space.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.06a
• /
• pp.81-82
• /
• 2010

Emerging global economic growth and increasing demand for energy supply and demand imbalance and the excessive use of fossil fuels existing the rapidly increasing greenhouse gas emissions and resource depletion of global energy crisis is deepening. Accordingly, improvement of living conditions around and through the natural ecological preservation and the need for a comfortable life for the meeting the importance of energy management and consumption are emerging. Many in the field of architecture for energy-saving measures, and conducting research and verify green building energy ratings and low energy for the initial steps that can be verified from the Energy Performance of BIM(Building Information Model) technology development and commercialization of the building energy to predict the performance objectively, leverages technology in an existing building energy performance analysis and possibilities of BIM-based green building process presented. In this study, using BIM for existing building energy performance analysis of data collected through the objective and efficient management of the energy it consumes Mapping and Management Plan is to research on.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4047-4051
• /
• 2014

Modern apartment houses are constructed to be relatively airtight with a high heat insulation system to increase the energy efficiency. Such a system has a range of deleterious effects due to the insufficient ventilation. In this study, the ondol system, which is used as a heat source typical of winter in Korea, was set as the default system to evaluate the indoor heat environment according to the ventilation method, the factors of energy reduction by the ventilation system was analyzed. The experimental apparatus was used to simulate the ambient conditions for a certain constant temperature and humidity chamber. The experimental results showed that the supply water temperature higher air volume decreases with increasing supply air temperature in the following order: floor supply/exhaust > total heat exchange supply/exhaust > forced supply/exhaust. Through this study, the applicability of various ventilations could be examined.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.205.1-205.1
• /
• 2010

국내에서 발생하는 생활폐기물 발열량이 최근 3,000 kcal/kg 정도를 웃돌고 있고 사업장 폐기물의 경우는 4,000~7,000 kcal/kg 정도로 높아 이러한 가연성 폐기물 들은 자원화하여 에너지원으로 사용가능하다. 폐기물 자원화 기술의 하나인 가스화 기술을 적용하면 폐기물 내의 가연분은 CO, $H_2$가 주성분인 합성가스로 전환되어 화학원료 또는 발전원료로서 활용이 가능하다. 본 연구에서는 합성가스의 다양한 활용분야 중에서도 메탄올과 CO의 합성을 통해 얻어지는 초산제조 공정에서 폐기물의 가스화를 통해 발생되는 합성가스 내의 CO를 적용하여 기존 초산제조공정에서 필요한 CO를 생산하기 위해 소모되는 고가의 납사 원료를 절감하고자 하는 방안이 검토되고 있다. 초산은 CO와 메탄올($CH_3OH$)을 금속이온계 귀금속촉매 상에서 메탄올카본닐레이션(Methanol carbonylation)반응으로부터 합성되는 것으로, 초산에스테르, 염료, 안료, 의약품 등의 원료로 사용되는 화학원료이다. 일반적으로 초산을 제조하기 위해 사용되는 CO를 생산하기 위하여 납사(Naptha)를 가스화하는 부분산화공정을 이용하거나 촉매를 사용한 Steam reforming공정을 적용하고 있는데, 가스화 및 Steam reforming의 원료가 되는 납사가 고가이고, 원유가가 상승하면 납사의 가격도 상승할 수 있고, 결국 초산제조 비용의 상승을 초래할 수 있다. 폐기물의 가스화를 통해 발생하는 합성가스 내의 CO를 활용하여 초산제조의 원료로 사용할 수 있다면 초산제조 공정에서의 CO 제조 비용 절감 및 폐기물 자원화의 효과를 동시에 달성할 수 있을 것으로 생각된다. 본 연구에서는 초산제조의 원료로 폐기물의 가스화를 통해 발생한 합성가스 내의 CO를 적용가능성을 검토하기 위하여 사업장 폐기물 및 사업장폐기물과 폐유, 건조슬러지 등을 혼합한 복합폐기물의 가스화를 통해 CO의 발생 특성을 분석하였다.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.6
• /
• pp.27-37
• /
• 2014

Heat island is caused by changes of land coverage structure of cities and use of energy in buildings. As a result energy use in buildings get to increase further followed by rising of GHG emission and deteriorating climate change. Eco-friendly housing complex is a kind of plan that applies environmental control elements like water and green spaces to housing complex. With these methods, it can be expected to create thermal environment of indoor and outdoor. In this paper quantitative examination is studied on using CFD to find out the effects of river, water permeable, parks and planting on thermal environment. And by comparing field measurements with CFD results which are aimed to development phase housing complex, feasibility and usability of the CFD analysis results are confirmed. And also, analysis on the ventilation performance followed by natural ventilation system is analyzed by selecting one building in housing complex. Based on the results, the possibilities of energy reduction through making thermal environment and applying natural ventilation are studied. With these outcomes, creating thermal conditions and using natural ventilation would be contributed to GHG reduction.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.06a
• /
• pp.397-401
• /
• 2009

On the crisis of international economy, the government is making an effort to seek economic growing motivation with the method of overcoming economic crisis and 'low carbon green growth'. Furthermore, to promote maritime vessel traffic service related inefficient energy wastage was revealed and eco-friendly alternative energy was accepted because of high price of oil in the beginning of 2008. In this situation, I'm going to discuss the possibility of eco-friendly energy system in maritime vessel traffic service with the way of cutting the budget and expansion of solar power generation system which was promoted to meet governmental 'energy saving plan for high price of oil'.

• International Area Studies Review
• /
• v.22 no.1
• /
• pp.41-60
• /
• 2018

It is widely known that the increased productivity lead to a decrease in energy consumption. The policy for reducing energy consumption is also focusing on the improvement of firm's productivity. However, the issue of productivity dilemma phenomenon is recently raised in various fields. It is phenomenon that the increased productivity rather lead to a increased in energy consumption through a rise in output. This paper analyzed the presence of productivity dilemma in korean firm using Tang et al(2015)'s theoretical model. To closely analyze, I performed the analysis using 715 firms during 2011-2015 and estimated the model using system GMM to minimize the endogeneity. The results show that total effect of productivity had a significantly negative coefficient. It is implies that the increased productivity doesn't increase energy consumption. In other word, this paper could not identified productivity dilemma and so did in overseas investment firm and national firm cases.