• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1991.04a
• /
• pp.75-79
• /
• 1991

고도로 산업화가 진행됨에 따라 회전기계는 더욱 중요시되고 있으며 이의 성능 향상에 부단한 노력이 경주되고 있다. 특히 우주 시대의 개막과 더불어 우주선 및 인공위성에 사용하기 위해 초소형이며 초고속의 고성능회전모타 를 개발하기에 이르렀다. 한 예로서 미국립항공우주국(NASA)의 스페이스셔 틀에 사용되는 주엔진 터보펌프를 들 수 있는데 이 터보펌프는 접시만한 크 기로써 71000마력을 생성해 낸다. 이러한 가공할 만한 에너지 밀도와 유량을 감당해 내려면 종래의 회전기계보다는 훨씬 더 높은 회전속도를 가져야 한 다. 이러한 회전체는 큰 관성부하와 진 동 및 동안정성의 문제등을 내포하고 있다. 고성능 회전기계의 또다른 예로서 초정밀 가공용 공작기계를 들 수 있 다. 선반 혹은 밀링머신으로 초정밀가공을 행하기 위해서는 회전축의 진동이 극히 작아야 한다. 이와 같이 오늘날 갈수록 초고성능 초정밀도를 추구함에 있어서 회전축의 진동을 현장에서 모니터링하고 이 진동데이터를 분석하여 회전축을 제어하는 것이 강력히 요구되어진다. 따라서 in-situ 측정이 중요성 을 띠게 되었는데 이는 제어기술의 바탕이 되는 자료를 현장에서 제공할 수 있기 때문이다. 회전축 진동측정의 대상이 되는 것들은 모타, 발전기, 엔진 및 터빈등을 대표적으로 들 수가 있다. 여기서 소형회전기계의 축표면과 같 이 비교적 곡면을 이루고 있는 부분의 진동변위 측정에 신중한 고려가 요구 되어 진다. 이는 축의 곡면도에 따라 감도가 변화하기 때문이다. 따라서 평 판에 대한 calibration 챠트를 회전기계축진동 변위환상에 이용하면 곡률에 따라서 오차가 생기게 된다. 본 연구에서는 비접촉 축진동측정시 발생되는 오차에 대하여 검토하고자 한다. from the studies, the origin of ${\alpha}$$_1$peak was attributed to the detrapping process form trap with 2.88[eV] deep of injected space charge from the chathode in the crystaline regions. The origin of ${\alpha}$$_2$ peak was regarded as the detrapping process of ions trapped with 0.9[eV] deep originated from impurity-ion remained in the specimen during production process of the material, in the crystalline regions. The origin of ${\beta}$ peak was concluded to be due to the depolarization process of "C=0"dipole with the activation energy of 0.75[eV] in the amorphous regions. The origin of ${\gamma}$ peak was responsible to the process combined with the depolarization of "CH$_3$", chain segment, with the activation energy of carriers from the shallow trap with 0.

• Korean Security Journal
• /
• no.10
• /
• pp.387-407
• /
• 2005

Thanks to the developments of IT technologies, such critical infrastructures as fundamental structures of energies, material circulations, monetary circulations, and living necessaries are intertwined as well as mutually dependent. In this respect, the fact that national infrastructures are closely related to IT infrastructures implies not only expected benefits to provide diverse information-based services, but also anticipated costs to bring about new dangers. However, in spite of these threats, traditional researchers have not put enough interests in these indirect danger, which yield the damages in broad areas through paralyzing risk management systems, although they have investigated such direct threats as nuclear accidents, conflagrations, traffic troubles, and gasoline accidents. Considering that the tendency to depend on electricity, so-called electrification, which is caused by automation and informationalization, is intensified in all parts of society, the breakout problem as a factor to inhibit securities in information-oriented society is significant. Thus, the problems of large-scale power blackout should be treated as national crises. Also, preparation systems for large-scale power blackout have to be provided quickly. In this paper, with analyzing various cases of large-scale power blackout and investigation the causes of them, researches on the blackout management systems of Korea are to be present, on the basis of national crisis management states which are comprised of protection (mitigating and preparing), responding, and recovering(rewarding).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.66-71
• /
• 2006

최근에 하도계획의 주된 과제는 하천환경의 보전과 창조를 위한 비용의 최소화이며, 침식과 세굴에 대한 하천관리 시설의 안정성을 확보하기 위한 질적 안전도의 최대화에 있다. 이를 위해 하도의 변화를 전제로 이동상 현상을 고려하고 저수로의 특성을 파악하여 하도계획에 반영하는 것이 필요하다. 이러한 하도계획과 관리를 위한 주요한 도구로서 하도특성조사가 제시되고 있다. 우리나라에서는 수변 생태환경의 기능회복으로의 하천환경에 관심을 기울이기 시작한 단계에 머물러 있다. 국내에서도 일본 등 선진 외국과 같이 홍수시 재해를 크게 경감하고, 자연환경을 실질적이고 체계적으로 배려하면서 경제적 하도계획 및 관리에 역점을 두어야 할 시점에 이르렀다. 이를 위해서는 우선적으로 하천이 갖고 있는 고유 특성인 하도특성에 대한 조사가 선행되어야 한다. 본 연구에서는 대상하천을 선정하고 측량, 하상재료 채취 및 분석, 유사량 채취 등의 기초조사를 수행하였으며, 이에 따른 하도특성량을 분석하였다. 대상하천은 금강유역의 지천 하류부의 약 2km 구간을 선정하였으며, 2003년${\sim}$2004년에 3회에 걸쳐 측량을 실시하고, 구간내 구룡수위표에서 유량 몇 유사량을 측정하였다. 또한 대상구간내 14개 지점에서 하상토를 채취하여 입도분석을 실시하였으며, 구룡수위표 자료를 이용하여 수문자료를 구축하였다. 수집된 기초자료를 이용하여 대상구간의 강턱유량, 특정재현기간유량, 유효유량을 산정하여 지배유량을 결정하였다. 산정된 지배유량을 이용하여 하상경사, 대표입경, 저수로내 평균수심, 에너지 경사, 마찰속도, 무차원소류력, 하폭-수심비, 수심-입경비 등의 하도특성량을 산출하여 하천환경정비를 위한 기초자료로서 활용 될 수 있도록 하였다.구에 맞는 작물 생산 및 농촌관광단지 조성을 통해 부가가치증대 및 소득증대를 꾀함으로 농촌문제 해결에 도움이 될 것으로 기대된다. 본 연구를 통해 GIS 와 RS의 기술이 농촌분야에 더 효율적으로 적용될 것으로 기대되며, 농업기술센터를 통한 정보제공을 함으로써 대농민 서비스 및 농업기관의 위상이 제고 될 것으로 기대된다.여 전자파의 공간적인 가시화를 수행할 수 있었다. 본 전자파 시뮬레이션 기법이 실무에 이용될 경우, 일반인이 전자파의 분포에 대한 전문지식을 습득할 필요 없이, 검색하고자 하는 지역과 송전선, 전철 등 각종 전자파의 발생 공간 객체를 선택하여 실생활과 관련된 전자파 정보에 예측할 수 있어, 대민 환경정보 서비스 질의 개선측면에서 획기적인 계기를 마련할 것으로 사료된다.acid$(C_{18:3})$가 대부분을 차지하였다. 야생 돌복숭아 과육 중의 지방산 조성은 포화지방산이 16.74%, 단불포화지방산 17.51% 및 다불포화지방산이 65.73%의 함유 비율을 보였는데, 이 중 다불포화지방산인 n-6계 linoleic acid$(C_{18:2})$와 n-3계 linolenic acid$(C_{18:3})$가 지질 구성 총 지방산의 대부분을 차지하는 함유 비율을 나타내었다.했다. 하강하는 약 4일간의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.는 초과수익률이 상승하지만, 이후로는 감소하므로, 반전거래전략을 활용하는 경우 주식투자기간은 24개월이하의 중단기가 적합함을 발견하였다. 이상의 행

• Membrane Journal
• /
• v.20 no.1
• /
• pp.29-39
• /
• 2010

This study focuses on the modeling of DMFC to predict the characteristics and to improve its performance. This modeling requires deep understanding of the design and operating parameters that influence on the cell potential. Furthermore, the knowledge with reference to electrochemistry, transport phenomena and fluid dynamics should be employed for the duration of mathematical description of the given process. Considering the fact that MEA is the nucleus of DMFC, special attention was made to the development of mathematical model of MEA. Multiscale modeling is comprised of process modeling as well as a computational fluid dynamics (CFD) modeling. The CFD packages and process simulation tools are used in simulating the steady-state process. The process simulation tool calculates theelectrochemical kinetics as well as the change of fractions, and at the same time, CFD calculates various balance equations. The integrated simulation with multiscal modeling explains experimental observations of transparent DMFC.

• Korean Journal of Microbiology
• /
• v.41 no.3
• /
• pp.201-207
• /
• 2005

A phenanthrene-degrading bacterium HS362, which is capable of using phenanthrene as a sole carbon and energy source, was isolated from oil contaminated soil. This strain is a gram negative, rod shaped organism that is most closely related to Sphingomonas paucimobilis based on biochemical tests, and belongs to the genus Sphingomonas based on fatty acids analysis. It exhibited more than $99.2{\%}$ nucleotide sequence similarity of 16S rDNA to that of Sphingomonas CF06. Thus, we named this strain as Sphingomonas sp. HS362. It degraded $98{\%}$ of phenanthrene after 10 days of incubation when phenanthrene was added at 500 ppm and $30{\%}$ even when phenanthrene was added at 3000 ppm. Sphingomonas sp. HS362 could also degrade low molecular weight PAHs(Polycyclic aromatic hydrocarbons) such as indole and naphthalene, but was unable to degrade high molecular weight PAHs such as pyrene and fluoranthene. The optimum temperature and pH for phenanthrene degradation were $30^{\circ}C$ and $4{\~}8$, respectively. Sphingomonas sp. HS362 could degrade phenanthrene effectively in the concentration range of NaCl of up to $1{\%}$. Its phenanhrene degrading ability was enhanced by preculture, suggesting the possibility of induction of phenanthrene degrading enzymes. Starch and surfactants such as SDS, Tween 85, and Triton X-100 were also able to enhance phenanthrene degradation by Sphingomonas sp. HS362. It carries five plasmids and one of them, plasmid p4, is considered to be involved in the degradation of phenanthrene according to the plasmid curing experiment by growing at $42^{\circ}C$.

• Journal of the Korean Vacuum Society
• /
• v.16 no.2
• /
• pp.79-90
• /
• 2007

Prototype of $800{\ell}$ vacuum web coater (Vic Mama) consisting of ion source with low energy less than 250 eV for high speed surface modification and 4 magnetron sputter cathodes was designed and constructed. Its performance was evaluated through fabricating the adhesiveless flexible copper clad laminate (FCCL). Pumping speed was monitored in both upper noncoating zone pumped down by 2 turbo pumps with 2000 l/sec pumping speed and lower surface modification and sputter zone vacuumed by turbo pumps with 450 1/sec and 1300 1/sec pumping speed respectively. Ion current density, plasma density, and uniformity of ion beam current were measured using Faraday cup and the distribution of magnetic field and erosion efficiency of sputter target were also investigated. With the irradiation of ion beams on polyimide (Kapton-E, $38{\mu}m$) at different fluences, the change of wetting angle of the deionized water to polyimide surface and those of surface chemical bonding were analyzed by wetting anglometer and x-ray photoelectron spectroscopy. After investigating the deposition rate of Ni-Cr tie layer and Cu layer was investigated with the variations of roll speed and input power to sputter cathode. FCCL fabricated by sputter and electrodeposition method and characterized in terms of the peel strength, thermal and chemical stability.

• Journal of the Korea Concrete Institute
• /
• v.17 no.1 s.85
• /
• pp.19-25
• /
• 2005

Recycling of waste materials in the construction Industry is a useful method that can cope with an environment restriction of every country. In this study, synthetic lightweight aggregates are manufactured with recycled plastic and fly ash with 12 percent carbon. Nominal maximum-size aggregates of 9.5 mm were produced with fly ash contents of 0, 35, and $80\%$ by the total mass of the aggregate. An expanded clay lightweight aggregate and a normal-weight aggregate were used as comparison. Gradation, density, and absorption capacity are reported for the aggregates. Five batches of concrete were made with the different coarse aggregate types. Mechanical properties of the concrete were determined including density, compressive strength, elastic modulus, splitting tensile strength, fracture toughness, and fracture energy. Salt-scaling resistance, a concrete durability property, was also examined. Compressive and tensile strengths were lower for the synthetic aggregates; however, comparable fracture properties were obtained. Relatively low compressive modulus of elasticity was found for concretes with the synthetic lightweight aggregate, although high ductility was also obtained. As nv ash content of the synthetic lightweight aggregate increased, all properties of the concrete were improved. Excellent salt-scaling resistance was obtained with the synthetic lightweight aggregate containing 80 percent fly ash.

• Journal of the Korean Ceramic Society
• /
• v.42 no.4
• /
• pp.292-297
• /
• 2005

$LiMO_{2}(M=Co,Ni)$ samples were synthesized with $Li_{2}CO_{3},\;Co_{3}O_{4}$, and NiO by the solid-state reaction method. In the case of $LiCoO_{2}$, at low temperature$(T=400^{\circ}C)$ spinel structure was synthesized and the obtained spinel phase was transformed to layered phase at high temperature$(T\ge600^{\circ}C)$. The phase transition behaviors of $LiCoO_{2}$ were investigated with various heating temperature and time. The rate of transition was directly proportional to the concentrations of reactant, and activation energy of reaction was around 6.76 kcal/mol. When CoO(rock salt structure) was used as a starting material instead of $Co_{3}O_{4}$(spinel structure), layered structure of $LiCoO_{2}$ was obtained at low temperature. In the case of $LiNiO_{2}$ the transition from layered structure to rock salt structure occurred easily by disordering/ordering reaction, but did not occur in $LiCoO_{2}$. The difference in metal ion radii in $LiCoO_{2}$ and $LiNiO_{2}$ results in different behaviors of phase transitions.

• Journal of Navigation and Port Research
• /
• v.28 no.6
• /
• pp.481-489
• /
• 2004

Ship collisions and grounding continue to occur regardless of continuous efforts to prevent such accidents. With the increasing demand for safety at sea and for protection of the environment, it is of crucial importance to be able to reduce the probability of accidents, assess their consequences and ultimately minimize or prevent potential damages to the ships and the marine environment. Numerical simulations for actual collision problem are conducted with a special attention with respect to finite element size, fracture criteria and material properties, which require a careful consideration to improve the accuracy. A parametric analysis varying colliding speed, angle, design loading condition is conducted using nonlinear finite element analysis method for 46,00 dwt Product/chemical carrier. The relationship between the absorbed energy and indentation are derived quantitatively using the insights observed from this study, and a novel design concept for assessing the anti-collision performance are proposed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.141-142
• /
• 2007

In recent years, the rate of mean sea level rise is increasing rapidly from the phenomena of global warming, together with the increasing trend of the storm scale. The issue of sea level rise is multifaceted and produces a range of environmental problems. Especially, high tides and the tidal currents become higher, and wave base increases, so the energy received at the coastal boundary may increase. This brings that many coastal environments go into disequilibrium, such as damages to the structures, erosion, and deposition Similarly it was known that the problems of nearshore processes and damage of berth and counter facilities during storm period had appeared at the small fishery port. Here we try to analyze the impact of the rearrangement of counter facilities and berth layout adopted for tranquility of its'inner harbor. Because this harbor is being connected to channel and open sea, the rearrangement of the structures might affect to the current speed and direction and wave height, so do to the sea bottom undulation. Therefore, we made model test for the several layouts of the berth and breakwater in this area.