• Clean Technology
• /
• v.29 no.2
• /
• pp.126-134
• /
• 2023

Direct catalytic decomposition is a promising method for controlling the emission of nitrous oxide (N₂O) from the semiconductor and display industries. In this study, a γ-Al₂O₃ catalyst was developed to reduce N₂O emissions by a catalytic decomposition reaction. The γ-Al₂O₃ catalyst was prepared by an extrusion method using boehmite powder, and a N₂O decomposition test was performed using a catalyst reactor that was approximately 25.4 mm (1 in) in diameter packed with approximately 5 mm of catalysts. The N₂O decomposition tests were carried out with approximately 1% N₂O at 550 to 750 ℃, an ambient pressure, and a GHSV=1800-2000 h^-1. To confirm the N₂O decomposition properties and the effect of O₂ and steam on the N₂O decomposition, nitrogen, air, and air and steam were used as atmospheric gases. The catalytic decomposition tests showed that the 1% N₂O had almost completely disappeared at 700 ℃ in an N₂ atmosphere. However, air and steam decreased the conversion rate drastically. The long term stability test carried out under an N₂ atmosphere at 700 ℃ for 350 h showed that the N₂O conversion rate remained very stable, confirming no catalytic activity changes. From the results of the N₂O decomposition tests and long-term stability test, it is expected that the prepared γ-Al₂O₃ catalyst can be used to reduce N₂O emissions from several industries including the semiconductor, display, and nitric acid manufacturing industry.

• Polymer(Korea)
• /
• v.33 no.5
• /
• pp.435-440
• /
• 2009

Thermal degradation behavior of CR (chloroprene) -modified NR (natural rubber) compounds, having different sulfur/accelerator compositions, was studied by non-isothermal TGA method. Data were analyzed using both Kissinger and Flynn-Wall-Ozawa analysis to assess the activation energies. Activation energy obtained from Kissinger analysis was $147.0{\pm}2.0$ kJ/mol for all samples, showing little effect of sulfur/accelerator composition changes in the samples. On the other hand, activation energy from Flynn-Wall-Ozawa analysis exhibited much variations with conversion, showing average value of $211.6{\pm}19.0$ kJ/mol. From the results, it was considered that whole thermal degradation processes of the samples were composed of complex multiple step processes, of which reaction mechanisms were different from each other.

• Clean Technology
• /
• v.20 no.1
• /
• pp.80-87
• /
• 2014

Numerical study was investigated to obtain the database for developing a fast pyrolysis power boiler by waste fuel. The studies with various conditions were performed using ANSYS FLUENT. Also, the fuel properties was experimentally analyzed to utilize the input parameters for numerical analysis, that were proximate and ultimate analysis, reaction kinetics included pyrolysis and combustion. The results showed that temperature, combustion and exhausted gases was changed with heating value of fuel and feeding rate. Finally, the stable operating condition by analyzing results was proposed.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1999.06a
• /
• pp.217-222
• /
• 1999

비열플라스마를 형성하는 방법은 전자 beam조사식과 전기방전법이 있다. 이 두방법의 공통점은 고에너지의 전자를 생성하여 플라스마를 발생시켜 가스분자의 전자충돌과 이온화에 의해 free radical반응에 의하여 가스분자를 분해시키는 것이다. (중략)

• Journal of the Korean Institute of Gas
• /
• v.1 no.1
• /
• pp.120-126
• /
• 1997

The thermal decomposition of low density polyethylene(LDPE) and $25\%{\~}48\%$ chlorinated polyethylene(CPE) were studied using a dynamic thermogravimetry in the stream of nitrogen gas with 20ml/min. The mathematic method, differential (Friedman) and Integral (Ozawa) method were used to obtain value of activation energy of decomposition energy on the reaction. The activation energies evaluated by the above methods agree with each other very well. The maximum average activation energy calculated was 71.71kcal/mol. The thermal decomposition of LDPE and CPE were considered to be carried out by main chain scission and the thermogravimetric trace curve agree with the theoretical equation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.143-143
• /
• 2000

MEIS를 이용하여 Cu3Au(100)에서 단원자층 분해능을 얻기 위한 연구를 하였다. 우선 수소이온을 이용한 첫째층과 셋째 Au층의 분리 시도는 extremely glancing exit angle 등 극한의 산란조건에서도 성공하지 못하였다. 깊이 분해능을 정해주는 electronic 에너지 손실을 극대화기 위해 수소이온 대신 질소 이온을 사용하여 에너지 스펙트럼을 측정해 본 결과, 표면 Au 층과 표면 셋째 Au 층을 구분할 수 있었다, <110>으로 정렬된 조건에서는 셋째 층의 Au 원자들이 완전히 shadow cone 내부에 존재하여 관측되지 않지만 9.75$^{\circ}$tilt한 경우 셋째 층의 Au 원자들이 shadow cone 바깥으로 나오게 되어 첫째 층과 셋째 층이 확실히 분리되어 측정되었다. 이 연구에서 MEIS로 단원자층의 분해능을 얻는데 성공하였다. 이러한 단원자층 분해능으로 시료의 온도변화에 따른 표면 첫째 층의 Au 의 조성변화를 관찰하였고 이를 전산 모사 하였다. 이 결과 벌크 전이 온도인 39$0^{\circ}C$이하에서 표면 첫째 층 Au의 조성이 감소하는 것을 관찰하였고 이러한 감소는 45$0^{\circ}C$근처까지 계속되었으며, 다시 온도를 실온으로 낮추면 본래의 질서화된 상태로 되돌아감을 확인하였다. 그리고 이를 전산 모사 한 결과, 표면 첫째 층의 Au가 표면 둘째 층으로 이동해 감을 알 수 있었다.

• Fire Science and Engineering
• /
• v.30 no.6
• /
• pp.9-13
• /
• 2016

Anti-oxidation and flame resistant polyurethane nanofibers were prepared by electrospinning and aluminum hydroxide addition. Electrospinning was carried out under the following procedure conditions; applied voltage, 20 kV; polymer solution feeding rate, 1.2 ml/h; collector rolling speed, 120 rpm; and tip to collector distance, 15 cm. Aluminum hydroxide was added to the prepared polymer solution for electrospinning to enhance the oxidation and flame resistant properties. The thermal properties were investigated by thermogravimetric analysis to determine the polymer decomposition temperature, integral procedure decomposition temperature, final decomposition temperature, and remaining amount after thermal decomposition. The activated energy for polymer degradation was also investigated using the Horowitz-Metzger equation. The activation energy increased to more than 50%. The thermal properties of the polyurethane nanofibers were improved by a hydration reaction during the thermal decomposition of aluminum hydroxide around $300{\sim}500^{\circ}C$.

• Journal of Hydrogen and New Energy
• /
• v.19 no.3
• /
• pp.226-231
• /
• 2008

Cu/Fe/$Al_2O_3$ granules with various sizes have been prepared by a combination of sol-gel and oil drop method for the use in sulfur trioxide decomposition, a subcycle in thermochemical sulfur-iodine cycle to split water in the hydrogen and oxygen. The size of composite granules have been mainly changed by the flow-rate of the gel mixture before dropping in the synthesis. The structural properties of the samples were comparable with granule size. In the reaction, the catalytic activity was enhanced by decreasing size in the entire reaction temperature ranges.

• New & Renewable Energy
• /
• v.17 no.2
• /
• pp.40-49
• /
• 2021

This paper explains the development process of methane decomposition to hydrogen and carbon black using solar thermal energy. It also demonstrates the advantages and disadvantages of five different reactors for each development stage, including the reactor's experimental results. Starting with the initial direct heating type reactor, the indirect heating type reactor was developed through five modifications. The 40-kWth solar furnace installed at the Korea Institute of Energy Research was used for the experiment. In the experiment using the developed indirect heating reactor, an 89.0% methane to hydrogen conversion rate was achieved at a methane flow rate of 40 L/min, obtained at about twice the flow rate compared to previous advanced studies.

• The Science & Technology
• /
• v.8 no.8 s.75
• /
• pp.10-12
• /
• 1975

학술원주최 광복30주년을 기념하는 종합학술회의가 8월11일부터 8월20일까지 (10일간)무역회관(서울 중구 회현동)에서 개최되었다. 국내외 저명학자들이 참가한 이번 종합학술회의는 인문과학부와 자연과학부로 구분진행되었고 자연과학부는 5개분과로 분류하였다. 제1분과는 과학교육을 중심으로 토론하고 제2분과는 생물학 및 지리학을 제3분과는 자원에너지를 다루고 제4분과는 장기이식과 면역,제5분과는 미량원소에 관한 심포지움을 각각 갖었다. 8월11일 오후 5시 개회식에 이어 개최된 심포지움 연제와 연사는 다음과 같다.