• Journal of the Korea Concrete Institute
• /
• v.13 no.2
• /
• pp.146-152
• /
• 2001

The fractal geometry is a non-Euclidean geometry which discribes the naturally irregular or fragmented shaps, so that it can be applied to fracture behavior of materials to investigate the fracture process. Fractal curves have a characteristic that represents a self-similarity as an invariant based on the fractal dimension. This fractal geometry was applied to the crack growth of cementitious composites in order to correlate the fracture behavior to microstructures of cemposite composites. The purpose of this study was to find relationships between fractal dimensions and fracture energy. Fracture test was carried out in order to investigate the fracture behavior of plain and fiber reinforced cement composites. The load-CMOD curve and fracture energy of the beams were observed under the three point loading system. The crack profiles were obtained by the image processing system. Box counting method was used to determine the fractal dimension, D$_{f}$. It was known that the linear correlation exists between fractal dimension and fracture energy of the cement composites. The implications of the fractal nature for the crack growth behavior on the fracture energy, G$_{f}$ is appearent.ent.

• Journal of Radiation Protection and Research
• /
• v.38 no.3
• /
• pp.143-148
• /
• 2013

Operational nuclear facilities such as nuclear power plants and particle accelerators show various neutron spectra according to the type of facilities and specific position. Necessities of neutron dose management and neutron monitoring for radiation protection of radiation workers in such a kind of facilities have continuously increased in recent years. Bonner sphere spectrometers are widely used for measurement of neutron spectra. Data on response function of neutron detector, default neutron spectra and count rates of Bonner sphere spectrometer are required to obtain unfolded neutron spectra in specific workplaces. In this study, we carried out measurement of neutron spectra produced in MC50 cyclotron using Bonner sphere spectrometer with LiI scintillation detector. Additionally, we estimated quantitative data on neutron flux, mean neutron energy and ambient dose equivalent rate according to the incident proton energies and positions in MC50 cyclotron.

• Journal of the Korea Concrete Institute
• /
• v.14 no.5
• /
• pp.718-725
• /
• 2002

A wall type friction damper is newly Proposed in this paper to improve the performance of R/C framed structures under earthquake loads. Although traditional dampers are usually placed as bracing members, the application ot bracing-type dampers into R/C structures is not as simple as those of steel structures due to the connection between R/C members and dampers and the stress concentration in connection region. Proposed damper is consisted of Teflon-sheet slider and R/C shear wall. The damper can also avoid stress concentration and reduce P-Δ effect. To evaluate the performance of proposed damper, nonlinear dynamic analyses are carried on 10 story and 3 bay R/C structures with numerical model for the damper. It is shown that the damper reduces the inter-story drifts and the time-historic responses; especially the damper prevents from forming plastic hinges on the lower columns.

• Journal of the Korean Society for Railway
• /
• v.17 no.3
• /
• pp.178-185
• /
• 2014

This study investigates the characteristics of environmental impact from the construction phase of a high-speed railway through a Life Cycle Assessment method based on the materials used and the energy consumption of the equipment used according to the design statement. The results reveal that the contributions to environmental impact in the construction sector of a high-speed railway were 89% for civil engineering, 7% for the track system, 2% for stations and 2% for the energy and telecommunication system. In particular, the highest contribution to the impact in the civil engineering category were 54% for Global Warming, 25% for Abiotic Resource Depletion and 8% for Photochemical Oxidant Creation. The main influence factors were the use of remicon and cement. In future, the application of Life Cycle Assessment for the construction sector of railway construction will introduce efficient reduction methods according to the quantitative calculation of environmental impact.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.432-432
• /
• 2013

현대에 이르러 직접방식 엑스선 검출기에서는 기존의 a-Se을 주로 이용하였지만, 고전압 인가에 따른 회로 손상과 짧은 수명, 그리고 누설전류에 따른 안전의 문제 등으로 낮은 에너지 밴드갭과 높은 흡수효율, 비저항 등에 의거한 다양한 대체 물질에 대한 연구가 활발하게 이루어져가고 있다. 본 논문에서는 직접방식 엑스선 검출물질로 전기이동도와 흡수효율이 뛰어나고, 밴드갭이 낮아 태양전지분야 뿐만 아니라 최근 엑스선 검출물질로 각광받고 있는 CdTe를 선정하였다. 연구의 목적은 PVD (Physical Vapor Deposition)방식의 CdTe 검출 물질의 제작과정에서 CdTe가 기화되어 하부전극 기판에 증착될 시, 하부전극 기판 온도에 따른 CdTe의 박막형성과 전기적 측정을 실시하여 그에 따른 최적의 증착조건을 선정하는 것이다. 하부전극 기판으로는 Au/glass를 사용하였으며 증착 시, $200^{\circ}C$, $300^{\circ}C$, $400^{\circ}C$로 나누어 특성을 평가하였다. 시료는 파우더형태의 다결정CdTe를 120 g를 사용하여 증착완료 시, 약 $100{\mu}m$의 박막두께를 구현하였다. PVD증착의 조건으로는 Mo재질의 보트를 사용하였으며, 증착 시 진공도는 $5{\times}10^{-6}$ Torr, 보트온도는 약 $350^{\circ}C$ 소요시간은 5시간이었다. 증착이 완료된 CdTe의 표면구조와 전기적 특성평가를 위해 SEM촬영을 실시하였고, 전기적 특성 평가를 위해 CdTe표면에 Au를 PVD방식으로 증착하였다. 실험 결과 SEM촬영을 이용한 표면특성에서는 하부전극 기판의 온도가 높아질수록 표면 결정입자가 증가하는 것을 확인할 수 있었으며, 전기적 특성에서도 하부전극 기판의 온도가 증가할수록 RQA-5 조건의 70 kVp, 100 mA, 0.03 sec 엑스선에 대한 우수한 민감도와 암전류 값을 확인하였다. 이러한 결과는 증착과정에서 온도에 따른 다결정 CdTe의 표면결정 크기 증가는 동일한 면적에서 표면결정 수의 감소를 뜻한다. 이는 결정간의 경계에서 트랩 되어지는 전자가 감소하고, 전자의 이동도 또한 높은 효율을 나타냄을 확인할 수 있었다. 따라서 본 연구를 통하여 CdTe기반의 직접방식 엑스선 검출기 제작과정에서 증착 시 하부전극기판 온도가 증가할수록 결정의 크기가 증가하여 최적의 전기적 특성을 나타냄을 검증할 수 있었다.

• Composites Research
• /
• v.24 no.6
• /
• pp.12-17
• /
• 2011

Interfacial durability and electrical properties of CNT or ITO coated PVDF nanocomposites were investigated for self-sensor and micro actuator applications. Electrical resistivity of nanocomposites for the durability on interfacial adhesion was measured using four points method via fatigue test under cyclic loading. CNT/PVDF nanocomposite exhibited lower electrical resistivity and good self-sensing performance due to inherent electrical property. Durability on the interfacial adhesion was good for both CNT and ITO/PVDF nanocomposites. With static contact angle measurement, surface energy, work of adhesion, and spreading coefficient between either CNT or ITO and PVDF were obtained to verify the correlation with interfacial adhesion durability. The optimum actuation performance of CNT or ITO coated PVDF specimen was measured by the displacement change using laser displacement sensor with changing frequency and voltage. The displacement of actuated nanocomposites decreased with increasing frequency, whereas the displacement increased with voltage increment. Due to nanostructure and inherent electrical properties, CNT/PVDF nanocomposite exhibited better performance as self-sensor and micro actuator than ITO/PVDF case.

• Journal of the Korean Solar Energy Society
• /
• v.38 no.4
• /
• pp.1-9
• /
• 2018

PVT modules commonly can be defined as a combination of PV modules and thermal collectors. After absorbing sun light, electricity and hot water can be actually provided to users simultaneously, which dual outputs (electricity and hot water) have drawn academic interest and industrial activities. Additionally, heat exchange between solar cell and flowing water can enhance solar cell efficiency. Because of PVT modules effectiveness, new international markets and commercial products have made. Especially European, facilities and measurement methods are established to evaluate PVT module performance. However, there are no currently appropriate internationally and domestic standards and facilities to test PVT module performance Herein, to test PVT module performance, indoor thermal simulators and fundamental standard study are considered.

• Tunnel and Underground Space
• /
• v.33 no.1
• /
• pp.10-28
• /
• 2023

Long-term shear behavior of the rock discontinuities should be analyzed and its stability should be evaluated to ensure the long-term stability of a high-level radioactive waste disposal repository. The long-term shear behavior of the discontinuities can be modeled with creep and RSF models. The shear creep test, velocity step test, and slide-hold-slide test can be performed to determine their model parameters or analyze the shear behavior by experiments under various conditions. Testing apparatuses for direct shear, triaxial compression, and biaxial shear were mainly used and improved to reproduce the thermo-hydro-mechanical conditions of local bedrock, and it was confirmed that the shear behavior could vary. In order to design a high-level radioactive waste disposal site in Korea, the long-term behavior of rock discontinuities should be investigated in consideration of rock types, thermo-hydro-mechanical conditions, metamorphism, and restoration of shear resistance.

• Transactions of the Korean hydrogen and new energy society
• /
• v.34 no.4
• /
• pp.381-387
• /
• 2023

The risk assessment (safety assessment) must be performed to verify the risks during operation and installation of the hydrogen system and to ensure safe design and operation. Among them, hazard and operability study (HAZOP), a qualitative risk assessment, is most often used to discover risk factors and secure safety. However, in HAZOP performance, there is a difference in the level of evaluation results depending on the level and experience of the evaluator, and there is a high possibility that subjective results will be derived. This study aims to develop a risk factor library that can list and provide information on potential risk factors in order to solve these problems when performing HAZOP, reduce risk factors that are omitted or overlooked.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.155-155
• /
• 2011

신재생에너지 수요가 확대됨에 따라 신재생에너지 관련 제품에 소요되는 물질에 대한 관심이 확대되고 있다. 이들 물질은 공급리스크가 존재하는 희유금속이 주를 이루고 있다. 본 연구에서는 신재생에너지 등의 high tech 기술 확대로 인한 희유금속의 수요 및 공급을 전망하고 있는 미국의 critical raw material 관리 전략을 살펴보고자 한다. 미국은 2010년 12월 미국 에너지성(DOE : Department of Energy)에서 위기 물질 전략(Critical Materials Strategy)에 관한 리포트를 공표하였다. 클린 에너지 기술 4개 분야(영구자석, 선진 전지, 태양전지 박막, 형광 물질)에서 핵심이 되는 물질(희유금속 등)의 수급 불균형이 일어날 가능성에 대해 조사를 실시하여 리스크 평가하여 단기, 중단기로 구분하여 위기물질을 선정하였다. 클린 에너지 기술 4개 분야에서 핵심이 되는 물질(네오디움, 디스프로슘, 코발트, 리튬, 랜턴, 세륨, 테룰, 인듐, 갈륨, 유로피움, 테르비움, 이트륨)의 12광종 수급을 2025년까지 전망한 결과 전체적으로 단기(2010년~2015년)보다 중기(2015년~2025년)에 공급 부족이 확대한다고 예측되었다. 단기적으로는 인듐이 약간 부족하는 것 외에 디스프로슘과 이트륨에 관해서도 공급 부족할 것으로 예측되었다. 중기적으로는 코발트(전지 기술에 사용)와 유로피움(고효율 조명용의 형광 물질에 사용) 외 대상이 된 다른 모든 물질은 공급 부족이 발생할 것으로 전망되었다. 이를 종합하여 단기적으로는 디스프리슘, 유로피움, 인듐, 테르븀, 네오디움, 이트륨 등이, 중기적으로는 디스프리슘, 유로피움, 테르븀, 네오디움, 이트륨 등이 위기물질(Critical Material)로 분석되었다. 에너지성은 위기물질을 공급원다각화, 대체물질개발, 리유즈, 리사이클링 등을 국제적 파트너와 함께 추진하여 리스크를 관리할 것이며, 2011년까지 최신정보를 구축하여 위기물질 전략을 재설정할 예정이다. 체계적인 위기물질 선정 및 관리전략 등을 참조하고, 신재생에너지기술 변화에 따른 원재료의 중요성 및 리스크 관리현황을 기초로 우리나라에 적합한 위기관리 물질 선정 및 관리가 필요할 것이다.