• 제목/요약/키워드: 에너지 교환

검색결과 749건 처리시간 0.025초

폐 인쇄회로기판의 유가금속 및 에너지자원 회수 (Recovery of the Metal and Energy Resources from the Wasted PCB)

  • 김유상
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2009년도 추계학술대회 초록집
    • /
    • pp.104-104
    • /
    • 2009
  • 금값 폭등과 에너지자원 고갈에 따라 폐 인쇄회로기판의 유가금속 및 에너지자원을 효과적으로 회수하고자, 최근 국내외 금 회수 및 폐백보드 활용방안을 제시하였다. 금을 회수하는 방법으로는 침적박리, 농축처리, 중화처리, 수용액환원처리, 이온교환수지, 전해채취 등의 방법이 있다. 금은 상온침적박리 회수하며 폐백보드는 이동식 건축내장재로 활용하고자 한다.

  • PDF

연료전지용 불소화 폴리벤즈이미다졸 양성자 교환 멤브레인 합성 및 특성평가 (Synthesis and Characterization of Fluorinated Polybenzimidazole Proton Exchange Membranes for Fuel Cell)

  • 김애란
    • 한국수소및신에너지학회논문집
    • /
    • 제28권1호
    • /
    • pp.24-29
    • /
    • 2017
  • A fluorinated polybenzimidazole (FPBI) was synthesized from 3,3-diaminobenzidine (DAB) of tetraamine, 2,2-bis(4-carboxyphenyl)hexafluoropropane of aromatic biscarboxylic acid, and 4,4-sulfonyldibenzoic acid of aromatic biscarboxylic acid in polyphosphoric acid (PPA). A FPBI was easily cast and made into clear films. The structure of condensation polymers and corresponding membranes were analyzed using GPC (gel permeation chromatography), $^1H$-NMR ($^1H$ nuclear magnetic resonance) and FT-IR (fourier transform infrared). TGA (thermogravimetric analysis) analysis showed that the prepared membranes were thermally stable, so that elevated temperature fuel cell operation would be possible. The proton conductivity of the FPBI membranes increased with increasing temperatures in the polymer. A FPBI membrane has a maximum ion conductivity of 45 mS/cm at $90^{\circ}C$ and 100% relative humidity.

수중 하베스트형 빙축열시스템의 축열조 특성 실험 (Experiments on the Characteristic of Storage Tank in In-Water Harvest-Type Ice Storage System)

  • 최인수;김재돌;윤정인
    • 에너지공학
    • /
    • 제9권4호
    • /
    • pp.366-371
    • /
    • 2000
  • 본 연구는 동적형 빙축열시스템에 있어서 증발판이 축열조 상부에 설치되어 생성된 얼음을 주기적으로 분리, 이탈시켜 하부에 설치된 축열조에 저장하는 기존의 하베스트형 빙축열시스템과는 반대로 축열조 내에 증발판을 설치하여 수중에서 얼음을 생성시키고 분리시켜 부럭에 의해 얼음을 띄워 저장하는 새로운 방식의 수중 하베스트형 빙축열시스템 개발에 관한 연구이다. 본 방식은 축열조 내에 증발판이 설치되어 제빙과 탈빙이 이루어짐으로서 기존 시스템에 설치되는 순환펌프나 순환수 분배기 및 배관 등의 설비가 불필요하고, 또한 조내 물과 증발판이 직접접촉에 의해 열교환이 이루어지므로 기존 공기 중에서의 열교환 방식보다 전열효율이 우수한 장점을 가지고 있다. 따라서 본 연구에서는 상기의 수중 빙제조 방식에있어 빙 제조시와 방냉시 축열조의 열특성을 실험적으로 밝혀 시스템 최적화 및 성능 향상에 대한 기초 자료를 제공하고자 하였다.

  • PDF

액정법을 이용한 주름형상 판형열교환기의 열전달 성능해석 (Investigation of Heat Transfer Performance in Corrugated Plate Heat Exchanger Utilizing Liquid Crystal Method)

  • 박성봉;이재용;김남진;김종보;서태범
    • 에너지공학
    • /
    • 제9권4호
    • /
    • pp.328-333
    • /
    • 2000
  • 이 연구의 목적은 액정법을 이용하여 주름형상 판형 열 교환기에서의 내부유동과 열 전달 성능의 특성을 파악하는데 있으며 공기를 작동유체로 사용하였다. 과거에는 실험이 주로 판형 열 교환기의 입·출구에서의 열 전달 성능에만 관심이 집중되었다. 그러나 이 실험에서는 액정법을 이용하여 판형열교환기 셀 표면 위에서의 국소 누셀트수의 분포를 연구하였다. 레이놀즈수가 증가할수록 열 전달 성능은 증가하였으나 마찰계수는 감소하였다. 주름각이 증가할수록 열 전달 성능과 마찰계수는 모두 증가하였다. 국소 누셀트수 분포로부터 열 전달이 잘 일어나는 부분은 주름을 타고 넘어 들어온 두 유동이 만나는 곳이며 또한, 셀의 가운데 부분은 셀의 수직단면적이 커서 셀 표면과 유동의 접촉이 약하므로 작은 누셀트수를 가지는 것을 알 수 있다.

  • PDF

암모니아-물 흡수식 열교환 사이클의 운전 특성 (Operating Characteristics of Ammonia-Water Absorber Heat Exchange Cycle)

  • 강인석;김남진;김종보
    • 에너지공학
    • /
    • 제10권4호
    • /
    • pp.357-362
    • /
    • 2001
  • 충진농도, 냉매 팽창밸브 개도, 그리고 약용액의 유량 변화에 따른 벤치타입 암모니아-물 흡수식 열교환 사이클에 대한 실험을 수행한 결과 시스템의 충진농도가 증가할수록 냉방능력이 증가하였으며, 최적의 충진농도가 존재함을 알았다. 그리고 냉매 팽창 밸브의 개도는 응축기 출구의 직접적인 영향을 주고 있으며 최적의 과냉도가 0~4$^{\circ}C$임을 알았다. 또한 약용액의 유량이 증가시킬수록 증발압력과 강용액의 농도가 즐어들었으며, 냉방능력과 COP가 최대가 되는 최적의 약용액 유량이 존재하였다.

  • PDF

실시간 삼중수소 검출을 위한 단위 양성자 교환 막 전기분해 기초연구 (Fundamental Study of Unit Proton Exchange Membrane Electrolysis for Realtime Detection of Tritium)

  • 채종민;유상석
    • 한국수소및신에너지학회논문집
    • /
    • 제29권2호
    • /
    • pp.226-234
    • /
    • 2018
  • Even though the nuclear power plants has many advantages, safety issues of nuclear power plants are crucial factors of reliable operation. A tritium detector is a useful sensor to analyze amount of exposed radiation from the nuclear power plants. Currently, concentration of underwater tritium is measured precisely but it takes very long time. Since electrolysis is extracted hydrogen from the coolant of nuclear power plant, it can motivate to develop new type of real-time sensor. In this study, Proton Exchange Membrane (PEM) electrolyzer is studied for candidate as preprocessor of real-time tritium detector. Characteristics of the unit PEM electrolyzer were experimentally investigated. A simulation model is developed to understand physical behavior of unit PEM electrolyzer under dynamic operation.

Economizer cycle control을 채용한 전열교환시스템의 에너지 절감효과 분석 -국내 공동주택을 대상으로- (Energy Saving Effect of ERV(Energy Recovery ventilator) with Economizer Control in Residential Building)

  • 박재형;김주욱;송두삼;윤호영;김성우
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2009년도 하계학술발표대회 논문집
    • /
    • pp.679-684
    • /
    • 2009
  • ERV system has installed in almost newly constructed residential building in Korea. Heat recovery features of ERV can be possible to decrease the heating and cooling load caused by ventilation. However, in case of the outdoor condition is favorable to control the indoor air, the heat recovery function of ERV does more harm than good in term of cooling load. In this study, the ERV with economizer cycle control for residential building is suggested and the performance of the suggested system will be analyzed using TRNSYS.

  • PDF

IEC 61968 기반 배전자동화 시스템 GIS 어플리케이션 (IEC 61968-based distribution management system GIS applications)

  • 이재형;김필석;박종호;신용학
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2015년도 제46회 하계학술대회
    • /
    • pp.314-315
    • /
    • 2015
  • 전력수요가 급증하면서 발전량 확보에 대한 요구에 따라 원자력 및 화력과 같은 기존 주요 발전설비로 인한 환경오염 문제에 대한 관심이 높아지고 있다. 일본 3.11 대지진과 후쿠시마 원전사고는 공급 위주의 전력에너지 정책 패러다임에 변화를 주었다. 원자력발전소 건설 규제 및 대책요구에 대한 여론이 높아짐에 따라 전력산업 전반적으로 수용가의 효율적인 에너지 사용을 포함하는 지능형 전력망(Smart Grid)과 수요반응(Demand Response) 기술이 화두가 되고 있다. 배전 시스템내의 어플리케이션 간의 정보 교환은 IEC TC-57 WG-14에 의해 IEC 61968 표준 규격으로 정의되고 Part 4인 "Records and Asset Management"에 기술된 규격에 대한 이해를 요구하고 한다. DMS와 GIS 시스템과 기존 연동하여 이러한 소규모의 마이크로그리드 시스템의 플랫폼으로 활용하도록 데이터교환 및 외부 GIS를 플랫폼으로 활용하는 통신 프로토콜을 소개하고자 한다.

  • PDF

연료 전지용 소수성/친수성 랜덤 멀티블럭 공중합체의 합성과 특성 (Synthesis and Property of Hydrophilic-Hydrophobic Random Multiblock Poly(ether sulfone)s as Polyelectrolytes for Fuel Cell Application)

  • 최규범;김상언;김영준;홍영택
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2009년도 추계학술대회 논문집
    • /
    • pp.197-198
    • /
    • 2009
  • 고분자 전해질막으로 사용할 수 있는 소수성/친수성 랜덤 멀티블럭 공중합체를 합성하였다. 공중합체는 수산화기를 각 말단에 가지고 있는 소수성 올리고머, 친수성 올리고머 및 반응성이 좋은 커플링 단량체로 친핵성 치환 반응을 활용하여 합성 하였다. 높은 반응성의 커플링 단량체의 존재로 비교적 낮은 온도에서 합성이 됨으로서 고온에서의 에테르-에테르 교환반응에 의한 랜덤화를 억제할 수 있었으며, 높은 중합도의 공중합체를 합성 할 수 있었다. 각 수산화기로 같은 말단으로 조정된 올리고머는 투입 비율의 조정으로 쉽게 이온교환용량을 조정할 수 있었다. 솔루션 캐스팅 방법으로 강도를 가지고 잘 휘어지며 투명한 전해질막을 제조할 수 있었다. 전해질막은 이온전도도, 물흡수율, 부피 변화율, 연료 투과성 등의 측정이 되었다.

  • PDF

고체 알칼리 연료전지용 음이온 교환 세공충진막의 제조 및 특성 (Preparation of pore-filling membranes for polymer electrolyte fuel cells and their cell performances)

  • 최영우;박구곤;임성대;이미순;양태현;김창수
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2009년도 추계학술대회 논문집
    • /
    • pp.150-153
    • /
    • 2009
  • Anion exchange polymer electrolyte pore-filling membranes consisting of the whole hydrocarbon materials were prepared by photo polymerization with various quaternary ammonium cationic monomers and characterized on the properties for applying to solid alkali fuel cell (SAFC). Hydrocarbon porous substrates such as polyethylene were used for the preparation of the pore-filling membranes. The hydroxyl ion conductivity of the polymer electrolyte membranes prepared in this research was dependent on the composition ratio of an electrolyte monomer and crosslinking agents used for polymerization. Furthermore, these pore-filling membranes have commonly excellent properties such as smaller dimensional affects when swollen in solvents, higher mechanical strength, lower fuel crossover through the membranes, and easier preparation process than those of traditional cast membranes.

  • PDF