• Korean Journal of Remote Sensing
• /
• v.33 no.5_3
• /
• pp.821-834
• /
• 2017

The increase in the rate of industrialization due to urbanization has caused the Urban Heat Island phenomenon where the temperature of the city is higher than the surrounding area, and its intensity is increasing with climate change. Among the cities where heat island phenomenon occurs, Seoul city has different degree of urbanization, green area ratio, energy consumption, and population density in each administrative district, and as a result, the strength of heat island is also different. So It is necessary to analyze the difference of Urban Heat Island Intensity by administrative district and the cause. In this study, the UHI intensity of the administrative gu and the administrative dong were extracted from the Seoul metropolitan area and the differences among the administrative districts were examined. and linear regression analysis were conducted with The variables included in the three categories(weather condition, anthropogenic heat generation, and land use characteristics) to investigate the cause of the difference in heat UHI intensity in each administrative district. As a result of analysis, UHI Intensity was found to be different according to the characteristics of administrative gu, administrative dong, and surrounding environment. The difference in administrative dong was larger than gu unit, and the UHI Intensity of gu and the UHI Intensity distribution of dongs belonging to the gu were also different. Linear regression analysis showed that there was a difference in heat island development intensity according to the average wind speed, development degree, Soil Adjusted Vegetation Index (SAVI), Normalized Difference Built-up Index (NDBI) value. Among them, the SAVI and NDBI showed a difference in value up to the dong unit and The creation of a wind route environment for the mitigation of the heat island phenomenon is necessary for the administrative dong unit level. Therefore, it is considered that projects for mitigating heat island phenomenon such as land cover improvement plan, wind route improvement plan, and green wall surface plan for development area need to consider administrative dongs belonging to the gu rather than just considering the difference of administrative gu units. The results of this study are expected to provide the directions for urban thermal environment design and policy development in the future by deriving the necessity of analysis unit and the factors to be considered for the administrative city unit to mitigate the urban heat island phenomenon.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.1
• /
• pp.29-33
• /
• 2011

Background and Purpose: Uniformity is the one of the important quality control features with respect to gamma cameras. To maintain adequate uniformity, we must acquire suitable flood table (=flood map) data because the flood table effects energy, and the type or dose of input radiation. Therefore, in this study we evaluated the difference in uniformity when uniformity does not match between the type of input radiation and the flood table data or collimator type. Subjects and Methods: For input radiation, we prepared 370 MBq of $^{57}Co$, $^{99m}Tc$, and $^{201}Tl$. Using SKYLight (Philips) and Infinia gamma cameras (GE), we acquired nine uniformity data that were corrected by technetium, cobalt flood table and did not corrected image for the three sources. Additionally, we acquired two uniformity images with a collimator that were corrected by intrinsic and extrinsic flood tables. Using this data, we evaluated and compared the uniformity values. Results: In the case of the SKYLight gamma camera, the uniformities of the images that matched between the input radiation and flood table with respect to $^{99m}Tc$ and $^{57}Co$ were better than the unmatched uniformity (3.96% vs. 5.69% ; 4.9% vs. 5.91%). However, because there was no thallium flood table, the uniformities of images at Tl were significantly incorrect (7.49%, 7.03%). The uniformities of the Infinia gamma camera had the same pattern as the SKYLight gamma camera (3.7% vs. 4.5%). Moreover, the uniformity of the $^{99m}Tc$ image acquired with a collimator and corrected by an extrinsic flood table was better than the intrinsic flood table (3.96% vs. 6.28%). Conclusion: Correcting an image by a suitable flood table can help achieve better uniformity for a gamma camera. Therefore, we have to acquire images with suitable uniformity correction, and update the flood table periodically. Whenever we acquire a nuclear medicine image, we always have to check the appropriate flood table according to the acquired condition.

• Journal of Animal Environmental Science
• /
• v.18 no.1
• /
• pp.1-8
• /
• 2012

The study was conducted to investigate the effects of climate on indoor environment of a swine house with natural. This study was tested in the beef swine stall at Young-in, Kyung-ki do. The test was experimented for the effect of interior environment by the outdoor environment and the interior-pan. The results are as follows. 1. In test 1 ($T_{out}$ : $25.7^{\circ}C$, without fan), an indoor air flow pattern was showed that entered from sidewall winch-curtain to went out of a indoor by the ridge winch-curtain. And the velocity of a section of the center was measured two times as large as the velocity of the floor. It is the acceleration of the velocity by thermal buoyancy. And, the entered air was rapidly dissipated by flow energy. So that in the swain livestock with sidewall winch-curtain is effected by thermal buoyancy. And the air temperature of the indoor was distributed more higher as compared with the outdoor temperature. This result is caused by the sensible heat from swine and the ventilation is restricted. 2. In test 2 (($T_{out}$ : $25.7^{\circ}C$, with fan), the velocity of a section of the center was measured more higher as compared with the test 1. And the variance of air velocity was distributed higher as compared with the test 1. This result is showed dead region of air flow with a fan operation. And, the variance of gas density was distributed lower as compared with the test 1.

• Food Science of Animal Resources
• /
• v.32 no.6
• /
• pp.828-834
• /
• 2012

The present study has been conducted to investigate the effects of feeding seleniferous whole crop barley (WCB) to finishing pigs on their growth performance, blood and carcass characteristics as well as on tissue selenium deposition. A total of 40 cross-bred barrows ((Landrace${\times}$Yorkshire)${\times}$Duroc) were allotted to five replicates of four treatments. Each replicate was arranged to 2 pigs per pen; the experimental period lasted for 6 weeks. The finishing pigs were fed diets containing 0.1 (non-seleniferous WCB as a control), 0.2, 0.4 and 0.6 ppm of selenium (Se) by supplementing the diets with seleniferous WCB. The isonitrogenous and isocaloric diets containing 5% non-seleniferous or seleniferous WCB were formulated. Feeding seleniferous WCB did not affect (p<0.05) the feed intake and BW gain. Total blood lipid concentration was significantly (p<0.05) decreased with increasing Se levels. Total blood cholesterol concentration for the control was significantly (p<0.05) higher than that for 0.4 and 0.6 ppm of Se treatments. Increasing the Se levels in WCB significantly (p<0.05) decreased blood triglyceride concentration; however, the levels increased immunoglobulin G and selenium concentrations. Feeding seleniferous WCB did not affect the carcass rate, backfat thickness and meat quality as well as yield grades. The Se concentration in the kidney, liver and loin were significantly (p<0.05) increased with increasing levels of seleniferous WCB. The results indicated that feeding seleniferous WCB may improve the blood characteristics related to lipid metabolism and thus, could produce selenium-fortified pork. Moreover, it is shown that the dietary optimal selenium level to depose selenium in porcine tissues by utilizing seleniferous WCB would be 0.4 mg of Se/kg of ration. Moreover, when 100 g of pork produced from pigs raised under such condition is served to consumers, it meets the minimum recommended daily requirements (40 ${\mu}g$) of dietary selenium proposed by the World Health Organization (1996).

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.9 no.1
• /
• pp.1-16
• /
• 2007

The use of information on natural resources is indispensable to most agricultural activities to avoid disasters, to improve input efficiency, and to increase lam income. Most information is prepared and managed at a spatial scale called the "Hydrologic Unit" (HU), which means watershed or small river basin, because virtually every environmental problem can be handled best within a single HU. South Korea consists of 840 such watersheds and, while other watershed-specific information is routinely managed by government organizations, there are none responsible for agricultural weather and climate. A joint research team of Kyung Hee University and the Agriculture, forestry and Fisheries Information Service has begun a 4-year project funded by the Ministry of Agriculture and forestry to establish a watershed-specific agricultural weather information service based on "high definition" digital climate maps (HD-DCMs) utilizing the state of the art geospatial climatological technology. For example, a daily minimum temperature model simulating the thermodynamic nature of cold air with the aid of raster GIS and microwave temperature profiling will quantify effects of cold air drainage on local temperature. By using these techniques and 30-year (1971-2000) synoptic observations, gridded climate data including temperature, solar irradiance, and precipitation will be prepared for each watershed at a 30m spacing. Together with the climatological normals, there will be 3-hourly near-real time meterological mapping using the Korea Meteorological Administration's digital forecasting products which are prepared at a 5 km by 5 km resolution. Resulting HD-DCM database and operational technology will be transferred to local governments, and they will be responsible for routine operations and applications in their region. This paper describes the project in detail and demonstrates some of the interim results.

• Korean Journal of Poultry Science
• /
• v.18 no.2
• /
• pp.67-84
• /
• 1991

The purpose of this study was to investigate the effects of dietary protein levels on laying hen performance. The level of methionine and lysine were 0.32% and 0.64%, respectively and the levels of protein were 12%, 13%, 14% or 15%. Total 384 laying pullets of 22weeks age were reared from January 28, 1989 to March 23, 1990 for 60 weeks. The results obtained were summarized as follows : 1 Egg productions was highest at 15% of protein in phase I, 14% in phase II, and 13% in phase III, and there was significantly different egg Production among treatments during phase I and phase II (P＜0.05). 2. Egg weight was heaviest in 14% of protein treatment in three phases and they showed significantly different egg weight among different levels of protein in phase I (P＜0.01), phase II and III (P＜0.05) , but there was not significantly different between 14% and 15% of protein. 3. Daily egg mass tends to increase followed by increasing of protein level and showed signifiant differences among treatments in phase I and phase II (P＜0.01). 4. The 14% of protein treatment showed the highest daily feed intake and it showed significant difference in phase I and phase II (P＜0.01) , but there was no significant difference between 14% and 15% of protein. 5. Feed efficiency was improved significantly followed by increasing of protein level in phase I (P＜0.01) and phase II (P＜0.05), but there was no significant difference among treatments in phase III. 6. Viability tends to increase as increasing of protein level, but there was no significant difference among treatments. 7. Utilizabilities of dry matter, crude protein and ether extract of experimental diets were not different among treatments, but the utilizability of carbohydrate tends to increase as increasing of protein level (P＜0.05). 8. Eviscerated yield and abdominal fat accumulation was not difference among treatments. 9. Egg shell quality and chemical composition of egg content were not different among treatments. 10. The feed cost per kg egg mass showed the cheapest in 13% of protein treatment in all phase, but there were no significant differences among treatments.

• Journal of Animal Science and Technology
• /
• v.46 no.4
• /
• pp.613-624
• /
• 2004

This study was aimed at investigating the effect of fat supplementation with divalent ions such as MgO and $CaCl_2$ on 1) in vitro ruminal fermentation characteristics and insoluble fatty acid formation, and on 2) animal performance in finishing Hanwoo bulls. In in vitro trial, five different types of diets based on supplementation sources of fat and divalent ions, i.e. T=basal diet+4% tallow, T-Ca=T+0.5% $CaCl_2$, T-Mg=TA+0.5% MgO, T-MgCa = T +0.5% $CaCl_2$+0.5% MgO, T-caS =4% Ca salt tallow, were tested. Higher pH values were observed at 6 hr incubation(P<0.01) while higher amount of VFA were produced in diets 4 and 5 at 12 hr incubation(P<0.05). Nutrients(DM, OM, Crude protein and NDF) degradation tended to increase in divalent ions or Ca-salts treated tallow treatments compared with tallow treatment after 12 h. The amount of insoluble fatty acid increased by adding MgO or $CaCl_2$ to tallow or Ca soap tallow during incubation(P<0.05). In in vivo trial, thirty finishing Hanwoo(average BW 460kg) were divided into three groups based on fat sources and divalent ions, i.e. Control(EE 2.40), T-MgCa = control + tallow + $CaCl_2$ + MgO, T-CaS = control + Ca soap tallow (EE 5.30%). After feeding each diet for 80 days, average daily weight gain showed 0.89, 1.02, 1.17kg in diets 1, 2 and 3, respectively. The highest feed efficiency was observed(0.12) in diet 2 group, followed by diet 3 (0.10) and 1 groups(0.08; P < 0.05). In conclusion, the present results could be sununarized that the performance of Hanwoo bulls was improved by tallow with divalent ions without any negative effect on rumen fermentation.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.12 no.4
• /
• pp.277-288
• /
• 2010

The multi-level $H_2O/CO_2$ profile system has been widely used to quantify the storage and advection effects on energy and mass fluxes measured by eddy covariance systems. In this study, we expanded the utility of the profile system by accommodating air sampling devices for isotope analyses of water vapor and $CO_2$. A pre-evacuated 2L glass flask was connected to the discharge of an Infrared Gas Analyzer (IRGA) of the profile system so that airs with known concentration of $H_2O$ and $CO_2$ can be sampled. To test the performance of this sampling system, we sampled airs from 8 levels (from 0.1 to 40 m) at the KoFlux tower of Gwangneung deciduous forest, Korea. Air samples in the 2L flask were separated into its component gases and pure $H_2O$ and $CO_2$ were extracted by using a vacuum extraction line. This novel technique successfully produced vertical profiles of ${\delta}D$ of $H_2O$ and ${\delta}^{13}C$ of $CO_2$ in a mature forest, and estimated ${\delta}D$ of evapotranspiration (${\delta}D_{ET}$) and ${\delta}^{13}C$ of $CO_2$ from ecosystem respiration (${\delta}^{13}C_{resp}$) by using Keeling plots. While technical improvement is still required in various aspects, our sampling system has two major advantages over other proposed techniques. First, it is cost effective since our system uses the existing structure of the profile system. Second, both $CO_2$ and $H_2O$ can be sampled simultaneously so that net ecosystem exchange of $H_2O$ and $CO_2$ can be partitioned at the same temporal resolution, which will improve our understanding of the coupling between water and carbon cycles in terrestrial ecosystems.

• Journal of Bio-Environment Control
• /
• v.29 no.2
• /
• pp.161-170
• /
• 2020

There is systematic spatial variations in environmental properties due to sensitive reaction to external conditions at plastic greenhouse occupied 99.2% of domestic agricultural facilities. In order to construct 3 dimensional distribution of temperature, relative humidity, CO₂ and illuminance, measurement matrix as 3 by 3 by 5 in direction of width, height and length, respectively, dividing indoor space of greenhouse was designed and tested at experimental site. Linear regression analysis was conducted to evaluate optimal estimation method in terms with horizontal and vertical variations. Even though sole measurement point for temperature and relative humidity could be feasible to assess indoor condition, multiple measurement matrix is inevitably required to improve spatial precision at certain time domain such as period of sunrise and sunset. In case with CO₂, multiple measurement matrix could not successfully improve the spatial predictability during a whole experimental period. In case with illuminance, prediction performance was getting smaller after a time period of sunrise due to systematic interference such as indoor structure. Thus, multiple sensing methodology was proposed in direction of length at higher height than growing bed, which could compensate estimation error in spatial domain. Appropriate measurement matrix could be constructed considering the transition of stability in indoor environmental properties due to external variations. As a result, optimal measurement matrix should be carefully designed considering flexibility of construction relevant with the type of property, indoor structure, the purpose of crop and the period of growth. For an instance, partial cooling and heating system to save a consumption of energy supplement could be successfully accomplished by the deployment of multiple measurement matrix.

• Journal of Sensor Science and Technology
• /
• v.2 no.1
• /
• pp.101-108
• /
• 1993

$TiO_{2}$/Se : Te heterojunction for color sensor has been fabricated by RF reactive sputtering and thermal evaporation methods onto glass substrate. The optimum deposition condition of $TiO_{2}$ films was such that RF power was 120 W, substrate temperature was $100^{\circ}C$, oxygen concentration was 50%, working pressure was 50 mTorr for the $TiO_{2}$ film thickness of $1000{\AA}$. In this case, the optical transmittance of $TiO_{2}$ film at 550 nm-wavelength was 85%, resistivity was $2{\times}10^9{\Omega}{\cdot}cm$, refractive index was 2.3, and optical bandgap was 3.58 eV. The composition ratio of 0 to Ti by AES analysis was 1.7. When $TiO_{2}$ films were annealed at $400^{\circ}C$ for 30 min. in $O_{2}$ ambient, the optical transmittance of $TiO_{2}$ films at the wavelength range of $300{\sim}580$ nm was improved from 0 to 25%. When Se : Te films were annealed at $190^{\circ}C$ for 1 min., photosensitivity under illumination of 1000 lux was 0.75. The optical bandgap of Se : Te films was 1.7 eV. The structures of Se : Te films were the hexagonal with (100) and (110) orientation. The spectral response of a-Se was improved by the addition of Te, especially in the long wavelength region. The $TiO_{2}$/Se : Te heterojunction showed wide spectral response, and more improved one than that of a-Si film in the blue light region.