• 한국IT서비스학회:학술대회논문집
• /
• 2008.05a
• /
• pp.483-488
• /
• 2008

현대의 제 기술 시스템, 특히 IT 시스템의 서비스의 운용은 전기에너지와 불가분의 관계에 있다. 주요 IT 시스템 일수록 전기의 안정적인 공급을 위해 무정전전원 장치(UPS)를 두고 있다. 그러나 UPS는 상용전원(commercial power)에 문제가 생겼을 때 작동하지 않는 사례가 많이 보고되고 있으며 이로 인해 해당 기업 혹은 기관에서는 설비 및 데이터의 손상과 서비스의 중단으로 인해 기업브랜드 가치 손상과 많은 복구비용을 부담하게 된다. 본 논문에서는 UPS 및 정류기 등에 예비전력으로 사용되는 산업용 고정형 축전지설비에 대한 서비스의 배경, 축전지 관리, 도입 효과를 기술하고 이를 IT 서비스화 하는 것에 대해 기술한다. 또한 축전지설비 진단 기술 및 예비전력 관리시스템 설계 시 고려사항에 대해 기술하고 예비전력관리에 관한 시장, 사업모델, 향후 전망 그리고 시장활성화 방안에 대해서 제안한다.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.103-108
• /
• 2008

Automatic control makes the air-handling unit go into operation and determines the functions of high-efficient and energy-saving machines. Yamatake, an automatic control system manufacturer, have expanded fault detection and diagnosis, and data volumes so as to achieve higher technology in control by developing a sensor which makes field data visible, an actuator and Intelligent Conponent. This study, thus, focuses on applications for saving energy with Intelligent Conponent and goes in for easing global warming by creating future field data-based applications.

• Journal of the Society of Disaster Information
• /
• v.11 no.2
• /
• pp.263-267
• /
• 2015

This study shows the result of the security assessment of the nationwide key energy facilities and suggests the ways of improving the security level. According to the study, most of the energy facilities are adequately equipped with physical security factors such as security personnel, security systems, fences, and guard posts, but lack of awareness is pervasive among those concerned, so the security operation is inefficient. In other words, inefficient deployment of security personnel, lack of the fundamental knowledge of the security systems, excessive dependence on surveillance cameras' functions such as Pan/Tilt/Zoom, misplaced cameras, low efficiency of monitoring, and irrelevant security plans. To solve these problems, above all, the authority concerned need to develop professional training programs to secure certified security mangers, and need to standardize security process to ensure consistency and to harness the standardization as a source of self assessment to improve security level.

• 기계와재료
• /
• v.23 no.2
• /
• pp.48-53
• /
• 2011

나노 기술을 바이오 분야에 접목하면 기존의 샘플 재취 및 분석시간, 분석 환경 등의 한계를 극복하여 현장진단, 실시간 진단 등이 가능한 고기능 바이오센서 개발이 가능해진다. 나노와이어 기반 바이오센서는 합성과정에서 전자 특성을 쉽게 제어할 수 있고, 용액내에서 바이오 및 화학물질을 감지하는 성능이 탁월하여 빠른 응답시간, 고감도, 고선택성 등의 동작특성이 향상될 수 있고, 집적화된 센서소자구현이 가능하다. 나노 바이오센서는 의료 분야뿐만 아니라 환경, 시설유지, 에너지관리, 공업프로세스 등 다양한 응용분야를 가지고 있다, 본 논문에서는 여러 나노 구조체 중에서도 전기화학 증착방법을 이용한 나노와이어의 기술적 특징과 합성방법, 전기적 센싱 시스템에 대해서 알아보고, 앞으로 개선되어야 할 사항들에 대해서 살펴보았다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.535-537
• /
• 2021

Sensor node and remote terminal unit (RTU) for diagnosis of obsolete sunlight generation equipments is proposed in this research. Sensor node can surveil monitor ambient temperature, current and voltage of invertor, and can communicate with RTU through RS485 channel. RTU can gather sensing data from sensor nodes and can transmit these data to management server through LTE CAT. M1 channel.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.1
• /
• pp.127-134
• /
• 2008

For more districted seismic design and attemped multi-bridge continuity, the existing seismic design is difficulted to treat seismic activity. So, many company applied multi-fixed point and damper or isolator, which is effective for decreasing seismic energy, on period shift, decentralization and damping. But, there is hard to design special bridge with adjusted seismic system because of absence seismic device and insufficient design experience. Therefore, the study on behavior characteristics of designed bridge with various seismic device is performed to utilize the result of this for selection of adequate seismic device.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.3
• /
• pp.46-52
• /
• 2018

Detail development and performance tests were conducted for the purpose of developing a damper system capable of lateral displacement control of existing frame structures. The development details are 1) ALD designed to prevent deformation of beams between columns and 2) AWD designed to control inter-story displacement. The non-reinforced BF specimen was used as a comparative study. The evaluation variables are failure mode, load-displacement curve, envelope curve, maximum strength, stiffness degradation and energy dissipation capacity. As a result, the seismic strengthening effect of ALD and AWD was confirmed. Also, it was confirmed that the method of restraining the column with the aramid sheet is superior to the improvement of the seismic performance.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.1 no.2
• /
• pp.87-94
• /
• 1997

This research aims to develop an algorithm of optimal transducer placement using Kinetic Energy of the structural system. The structural vibration response-based health monitoring is considered one of the best for the system which requires a long-term, continuous monitoring. In its experimental modal testing, however, it is difficult to decide on the measurement locations and their number, especially for complex structures, which have a major influence on the quality of the results. In order to minimize the number of sensing operations and optimize the transducer location while maximizing the accuracy of results, this paper discusses about an optimum transducer placement criterion suitable for the identification of structural damage. As a criterion algorithm, it proposes the Kinetic Energy Optimization Technique (EOT), and then addresses the numerical issues which are subsequently applicable to actual experiment where a bridge model is used. By using the experimental data, it compares the EOT with the EIM (Effective Independence Method) which is generally used to optimize the transducer placement for the damage identification and control purposes. The comparison conclusively shows that the EOT algorithm proposed in this paper is preferable when a structure is to be instrumented with fewer sensors.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.5
• /
• pp.152-160
• /
• 2008

Since wall system apartment used the shear wall as main lateral resistance member, installation of openings which causing section loss of walls may cause significant problem to structure. Also, there are few studies for inducing coupling beam or slabs which are occurred by installing openings. Therefore, this study planned isolated 2-story shear walls which are reduced three half-scale specimen to find out walls behavior characteristic. The test results showed that strength reduction caused by loss of effective section of walls and different result of stiffness and energy dissipation regarding to the coupling beam and coupling slabs.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.1
• /
• pp.150-159
• /
• 2014

A simplified method for the calculation of buckling and vibrational characteristics of initially stressed rectangular plate and antisymmetric angle-ply laminated plates is presented in this paper using the natural frequencies under unloading state. The equation of motion of rectangular plate with two opposite edges simply supported is investigated on the basis of Rayleigh-Ritz method and Mindlin plate theory with effect of the curvature term. The relationships of the non-dimensional natural frequencies with initial stresses the coeffcients of critical buckling and the boundaries of the dynamic principal instability region can be characterized by the non-dimensional natureal frequencies under unloading state. Numerical examples are presented to verify the simplified equations and to illustrate potential applications of the analysis.