• Journal of Korean Society of Transportation
• /
• v.17 no.5
• /
• pp.137-149
• /
• 1999

For decades, many traffic flow studies on the analysis and determination of level of service (LOS) for the weaving sections have been made to Provide several regression equations. Weaving and non-weaving speeds were dependent variables for the equations, with independent variables being weaving length, number of lanes, and weaving ratios. One of the difficulties in developing the equations was that the weaving areas were rare in Korea, so the statistical analyses for calibrating the equation parameter could not be performed in a desirable manner. In this regard, a new and stochastic methodology for predicting the weaving and non-weaving speeds within the weaving sections was required. In this study the following design variables were developed; influence area of the weaving section. headway distribution within the weaving section, maximum weaving volume of the weaving section, length of the ideal weaving section, and speed estimations for the weaving and non-weaving flows. The evaluation of the new model was made comparing the delay in the weaving section with the one in the freeway basic section.

• Proceedings of the KOR-KST Conference
• /
• 1999.10a
• /
• pp.303-308
• /
• 1999

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.1
• /
• pp.42-60
• /
• 2024

This study analyzed the characteristics of mixed traffic flows with autonomous vehicles on highway weaving sections and assessed the safety of vehicle-following pairs based on surrogate safety indicators. The intelligent driver model (IDM) was utilized to emulate the driving behavior of autonomous vehicles, and the weaving sections were divided into lengths of 300 and 600 meters for analysis within a micro-traffic simulation (VISSIM). Although significant differences were found in the average speed, density, and headway between the two sections through t-test results, no significant differences were observed when comparing the number of conflicts per indicator and the vehicle-following pair. Four safety indicators were selected for the mixed traffic evaluation based on their ability to represent risk levels similar to those perceived by drivers. The safety analysis, based on the selected four indicators, determined that autonomous vehicles following other autonomous vehicles were the safest pairing. Future research should focus on integrating these indicators into a single comprehensive index for analysis.

• Journal of Korean Society of Transportation
• /
• v.13 no.3
• /
• pp.99-120
• /
• 1995

가속차선이 교통류의 운영상태와 안전에 기여하는 바는 벌써부터 인식되어 왔으나 이 변속차선이 유입형 연결로 접속부 전체의 운영에 미치는 영향을 수치화하거나 체계적으로 평가하기 위해 현장 자료를 바탕으로 한 실험적 연구는 진행되어 오지 못하엿다. 현재 널리 참고되고 있는 1985년 USHCM의 접속부 운영상태 분석 방법론은 단지 차선 1의 교통량을 예측하는 데 주안점을 두고 있는데 가속 차선의 길고 짧음에 따라 접속부 바로 전 차선 1의 교통량 분포가 크게 변화한다는 사실(많은 현장 관측을 통해 확인)은 고려하지 못하고 있다. 이는 접속부 운영 상태가 같은 교통량 조건하에서도 크게 차이가 나나다는 것을 뜻하며 가속차선의 존재를 무시한채 운영과 관련한 MOE를 도출하는 것이 서비스수준 산정 방법으로 충분한 것인가 하는 의문을 자연히 낳게 한다. 본 논문은 가속차선이 고속도로 연결로 접속부의 운영에 미치는 영향을 주로 다루고 있다. 가속차선의 독립적인 역할과 영향을 체계적으로 관찰하기 위해 미국내 여러 지역에서 8개의 고속도로 연결로접속부를 선택하고 각 지점에 접속부의 상하류 지역을 포함하는 2,000ft 구간내에 다섯대의 카메라를 설치, 지점별로 약 3시간 동안 자료를 수집하였다. 총 193개 자료수의 분석을 통해서 다중 회귀 모형을 구성하는 독립변수로 가속차선의 길이를 사용하는 것이 타당하다고 결론지었으며, 접속부 운영의 질, 특히 속도를 추정하기 위한 모형을 수립하였다. 본 연구를 통해 얻어진 관점과 방법론은 1994USHCM 고속도로 연결로 분석 방법론 설정에 일부분 반영되고 잇으며 특히 교통운영과 흐름의 방식에서 유사한 엇갈림 구간의 분석 방법과 일관성 있는 분석 체계 마련을 위해서 서비스수준 산정 절차 정립에 엇갈림 알고리즘을 활용하는 방안을 제시하였다.

• Journal of Korean Society of Transportation
• /
• v.20 no.4
• /
• pp.73-82
• /
• 2002

The influence of bus stops near signalized intersections is one of the important factors which cannot be negligible in the analysis of the capacity of signalized intersections. Absence of consideration of bus bay can reduce capacity and increase the time that the stop of buses block other traveling vehicles. This influence is reflected by the bus blockage adjustment factor in KHCM, but the factor does not consider the course of each bus passing the intersection. Particularly, left turn buses have more influence on the capacity than the other buses and require the minimum length of the road for lane changes. All the existing criteria can apply only to arterial roads on which mostly traffic flows are continuous. And the criteria. which can determine the optimum location and the minimum distance between a signalized intersection and a bus bay, is not prepared and the related study is insufficient. Therefore, a theoretical formula is derived in this study being based on the theories which are avaliable to apply to the situation of signalized intersections.

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.4
• /
• pp.109-118
• /
• 2018

Two-row overlap pile wall, currently under development for use in deep excavations, is a novel retaining structure designed to perform itself as a cutoff wall as well as a high-stiffness wall by constructing four overlapping piles arranged in zigzag manner at a time using a tetra-axis auger. This wall has a relatively complex cross-section, compared with other types of pile wall, which would make it difficult to determine design parameters related to cross-section. In this study, a flexural rigidity equation has been derived by analyzing both theoretically and statistically various wall cross-sections with different pile diameters and overlap lengths. The flexural rigidity equation was found to show the maximum error rate of 3%.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.2
• /
• pp.573-582
• /
• 2014

Since there is no clear installation criteria on minimum spacing between signalized intersection and minor road, many problems have occurred in terms of traffic operation and safety. Even though many studies about entrance/exit intersection have been done in operational aspects, there is no specific and detailed research between the signalized intersection and minor road by now. Thus, this research suggests the optimal spacing between signalized intersection and minor road considering traffic operation and safety. Also, survey on vehicle behavior was conducted in this research. In conclusion, by suggesting the required minimum spacing between signalized intersection and minor road, it can be contribute in establishing and operating the installation criteria between signalized intersection and minor road.

• Journal of Energy Engineering
• /
• v.22 no.2
• /
• pp.120-127
• /
• 2013

This study investigated the characteristics of heat transfer and pressure drop for cross-flow heat exchanger of premixed combustion system. The premixed burner was in front of a heat exchanger, and the number of heat exchanger modules was changed to investigate the characteristics of NOx and CO emissions with various equivalence ratios. In addition, the effectiveness, entropy generation and pressure drop were calculated by various number of heat exchanger modules and the performance of heat exchanger was analyzed by the exergy loss.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4D
• /
• pp.527-538
• /
• 2011

Currently, the only established criteria is on the location of bus stops on principal roads where uninterrupted flow mainly occurs. There are no clear guidelines on any method to locating bus stops considering the characteristics of bus operation and pedestrians. If the location or exterior of a bus stop is inappropriate, road users including bus drivers and pedestrians will be caused serious dangerous and inconvenience. In this study, the research below was performed in order to propose rational criteria for the location of bus stops integrated with or separated from speed-change lanes at signalized intersections considering smooth traffic flow and the characteristics of bus operation and pedestrians as well as traffic safety : First, the appropriate length of each of the near-side and far-side bus stops was calculated by categorizing bus stops to be constructed into those integrated with speed-change lanes and those separated from speed-change lanes. Secondly, the appropriate length of each of the bus stops divided into near-side bus stops and far-side bus stops and integrated with or separated from speed-change lanes was selected by considering the characteristics of pedestrians. Thirdly, whether the construction locations of bus stops were appropriate or not was determined based on the appropriate length of bus stops integrated with or separated from speed-change lanes, which was calculated and selected by considering traffic flow and the characteristics of pedestrians and considering traffic safety. The method for locating bus stops considering traffic flow, the characteristics of pedestrians, and traffic safety will be able to help suggestion criteria of bus stop and the location of safe and pleasant bus stops.