• Title/Summary/Keyword: 얼음생성

Search Result 51, Processing Time 0.022 seconds

Pt(111)과 Ru(0001) 표면에 생성시킨 얼음 층의 연구

  • Kim, Su-Yeon;Gang, Heon
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2010.02a
    • /
    • pp.395-395
    • /
    • 2010
  • RIS(Reactive Ion Scattering)은 저 에너지 이온 빔을 쏘아 표면을 분석하는 방법이다. 분자 동력학 계산(MD simulation) 결과에 따르면 $Cs^+$이온은 두꺼운 얼음 표면에서 산란이 거의 일어나지 않는다. 본 연구에서는 이와 달리 Pt(111)과 Ru(0001) 표면에 생성시킨 두꺼운 얼음 표면에서 $Cs^+$이온 산란 실험이 가능함을 보였다. 한편, RIS signal은 얼음 층이 쌓인 구조나 두께에 따라 영향을 받는데, Ru(0001)과 Pt(111)의 표면에 생성시킨 crystalline water ice에서 시간과 water ice film의 두께가 RIS signal에 어떠한 영향을 미치는지도 조사하였다.

  • PDF

Development of the cooling effect skincare product using LPG as propellant (액화 석유가스를 이용한 냉각 화장품 개발)

  • Kim Hwayong;Park Chanik;Bae Won
    • Journal of the Korean Institute of Gas
    • /
    • v.7 no.4 s.21
    • /
    • pp.1-6
    • /
    • 2003
  • Freon gas has been replaced with LPG in the cosmetic industry because of its bad effects on environment. In this paper, skincare product with a cooling effect was developed using LPG as propellant. A cooling effect is obtained by the ice which is formed through spraying. Ice formation is affected by the composition of LPG and most of all, the high content of propane gas in the LPG results in the irregular surface of ice formed because of its high vapor pressure. Also the ratio of LPG to skincare solution affects the formation of ice.

  • PDF

SPHEREx Galactic Science: Ice Evolution from Molecular Clouds to Protoplanetary Disks

  • Lee, Jeong-Eun
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.43 no.1
    • /
    • pp.48.1-48.1
    • /
    • 2018
  • SPHEREx의 중요 임무 중 하나는 $0.75{\mu}m$$5{\mu}m$ 사이에서 $H_2O$, CO, $CO_2$, XCN, OCS, 그리고 $CH_3OH$와 같은 얼음 분자의 전천 탐사 스펙트럼을 제공하는 것이다. 이러한 얼음 분자는 성간분자운의 먼지 티끌 표면에서 생성되어 별 탄생의 필연적 산물이며, 행성이 형성되는 원시행성계원반에서 다양한 변화를 겪게 되고, 복잡한 유기분자를 합성하게 된다. 하지만 충분하지 않은 관측 자료로 인해, 얼음 분자의 진화에 대한 이해가 미약한 상태이다. 현재까지는 근적외선에서 충분히 밝은 100 여개의 배경별이나 원시성에 대해서만 얼음 스펙트럼을 관측할 수 있었다. SPHEREx를 이용한 고감도 전천 탐사 미션은 약 20,000 여개의 배경별과 원시성에 대해 얼음 분자 스펙트럼을 제공할 것이다. 이렇게 100 배 이상 늘어난 샘플 스펙트럼 수로 인해, 얼음 분자의 진화에 대해서 통계적으로 의미있는 연구가 가능해 질 것이다. 본 발표에서는 SPHEREx의 Ice Program을 소개하고, 기대되어지는 결과에 대해서 논의하고자 한다.

  • PDF

Development of a curling pad performance test system to support Korea curling team (국가대표 컬링 대표팀 지원을 위한 컬링 패드 성능 시험 시스템 개발)

  • Kim, Taewhan;Lee, Sangcheol;Kil, Sekee
    • Journal of the Korea Convergence Society
    • /
    • v.11 no.10
    • /
    • pp.25-30
    • /
    • 2020
  • In this study, a test system which can test performance of curling pad was developed to support Korea curling team. The developed system consists of a water tank, a mechanical pad driving system that can perform sweeping movement using a curling pad on surface of ice made by the water tank, and temperature sensors monitoring ice and air temperatures. To control the temperature of ice and humidity/temperature of air around the ice, all system are installed in a chamber that can isolate the developed system from external environment. Eight kinds of curling pads were tested using the developed system. Test result showed that each curling pad revealed different rate of ice temperature increasing. The pad with the highest rate of ice temperature rising was found to be the same as the most preferred pad by the athletes. Therefore, it was confirmed that the method of measuring change of ice temperature by the sweeping performed in this study is an effective method to test the performance of the pad.

Experiments on the Characteristic of Storage Tank in In-Water Harvest-Type Ice Storage System (수중 하베스트형 빙축열시스템의 축열조 특성 실험)

  • 최인수;김재돌;윤정인
    • Journal of Energy Engineering
    • /
    • v.9 no.4
    • /
    • pp.366-371
    • /
    • 2000
  • 본 연구는 동적형 빙축열시스템에 있어서 증발판이 축열조 상부에 설치되어 생성된 얼음을 주기적으로 분리, 이탈시켜 하부에 설치된 축열조에 저장하는 기존의 하베스트형 빙축열시스템과는 반대로 축열조 내에 증발판을 설치하여 수중에서 얼음을 생성시키고 분리시켜 부럭에 의해 얼음을 띄워 저장하는 새로운 방식의 수중 하베스트형 빙축열시스템 개발에 관한 연구이다. 본 방식은 축열조 내에 증발판이 설치되어 제빙과 탈빙이 이루어짐으로서 기존 시스템에 설치되는 순환펌프나 순환수 분배기 및 배관 등의 설비가 불필요하고, 또한 조내 물과 증발판이 직접접촉에 의해 열교환이 이루어지므로 기존 공기 중에서의 열교환 방식보다 전열효율이 우수한 장점을 가지고 있다. 따라서 본 연구에서는 상기의 수중 빙제조 방식에있어 빙 제조시와 방냉시 축열조의 열특성을 실험적으로 밝혀 시스템 최적화 및 성능 향상에 대한 기초 자료를 제공하고자 하였다.

  • PDF

Development of Icing Simulation Device for Gas Turbine Icing Test (가스터빈 결빙시험용 결빙모사장치 개발)

  • Lee, Gyeong-Jae;Lee, Jin-Geun;Go, Seong-Hui;Jeon, Yong-Min;Yang, Su-Seok;Lee, Dae-Seong
    • Aerospace Engineering and Technology
    • /
    • v.5 no.2
    • /
    • pp.37-46
    • /
    • 2006
  • The outside environment is very severe while aircraft is cruising. Especially small particle of icing in cold air condition can have negative influence on aircraft performance. If ice particle is attached to leading edge of wing, it can change wing configuration and decrease flight quality. If icing particle is attached to inlet of engine, it can damage compressor blade and have negative influence to aircraft safety. We make icing simulation device with liquid air system for analyzing about variation of engine performance due to incoming of icing to engine.

  • PDF

Baekdu Volcano Lake "Chun-ji" Ice Dynamic Monitoring Using TerraSAR-X Satellite Imagery (TerraSAR-X 위성영상을 활용한 백두산 천지 얼음 면적 변화 모니터링)

  • Park, Sung-Jae;Lee, Seulki;Lee, Chang-Wook
    • Korean Journal of Remote Sensing
    • /
    • v.35 no.2
    • /
    • pp.327-336
    • /
    • 2019
  • The caldera lake "Chun-ji" is located at the summit of Baekdu volcano, which is in the border of China and North Korea. Chun-ji Lake has altitude 2,189 m above sea level. The Chun-ji is freezing in the winter when the water temperature goes down to zero for a year, and it melts in the season when the water temperature goes up again. However,since it is located at a high altitude, there are many cloudy days, and it is difficult to observe with optical images. For this reason, radar images, which are less influenced by weather than optical images, are more effective for observing the ice of heaven and earth. In this study, 75 TerraSAR-X images from chun-ji area were used for analysis from 2015 to 2017, and the calculated ice area and temperature changes were analyzed. As a result, the ice of the caldera lake formed was formed in early December and slowly melted until mid-April. During this period, temperatures in the Samjiyeon area were about $-10^{\circ}C$ when ice was produced, and the temperature was about $0^{\circ}C$ in mid-April when it was thawing. Correlation coefficients between ice surface area and temperature in winter 2015 and 2016, where global ice is produced,show a high correlation of -0.82 and -0.75. In addition to the results of this study, it can be used as an indicator to monitor the volcanic activity by comparing the result of the recent volcanic activity with the result of the increase in water temperature using various imagery.

A Computational Treatment of Word Order and Case Assignment in Korean (한국어의 어순과 격 할당에 대한 전산적 처리)

  • Lee, Ki-Yong
    • Annual Conference on Human and Language Technology
    • /
    • 2001.10d
    • /
    • pp.431-438
    • /
    • 2001
  • 일반적으로 한국어 문장에서 명사는 용언의 항가(valency)에 의해 격이 할당된다. 그러한 이유로, 한국어는 용언이 문장 끝에 온다는 일반적인 제약 이외에는 그 어순이 비교적 자유롭다. 그러나 격 할당과 자유 어순에 대한 여러 가지 비규칙적인 현상들 때문에 문장 분석이나 생성에 문제가 일어난다. 예를 들면, "나 머리 아프다"에서처럼 명사에 격조사가 표시되지 않고 문장이 생성될 수도 있고, "은/는"이나 "도"와 같은 특수조사와 결합할 때는 그 격이 드러나지도 않는다. 어순의 경우, "물이 얼음이 되었다"=/= "얼음이 물이 되었다" 에서처럼 주격이 이중으로 나타나면 어순이 자유롭지 않는 반면, 용언의 어미가 문장 종결형일 때에는 "어서 가자 백두산으로"에서처럼 용언이 문미에 오지 않을 수도 있다. 이 논문은 한국어의 어순과 격 할당에 관한 이러한 문제를 어떻게 처리할 것인가를 보이는 것이 그 목적이다. 문제를 가급적 명시적으로 해결하기 위하여, 본 논문은 문장 분석과 생성에 대한 규칙과 제약 조건들을 형식화하고 문장 처리 과정에서 일어나는 격 할당과 어구 결합 및 배열 과정을 malaga라는 프로그래밍 언어로 구현하여 실험할 것이다.

  • PDF

Ice Formation on the Outer Surface of a Vertical Tube with Inside Refrigerant Boiling (관 내부 냉매비등이 있는 수직관 외부 얼음 형성 연구)

  • Nguyen, Minh Phu;Lee, Geun-Sik
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.35 no.2
    • /
    • pp.129-135
    • /
    • 2011
  • An ice-making model has been developed and analyzed in this study. The effects of the following on the ice formation on the outer surface of a tube in which a refrigerant flows and boils are numerically investigated: thermal resistance of the refrigerant and thermal resistance of the ice formed on the outer surface of the tube. The ice thickness and related variables are analyzed in the case of the refrigerants R22 and R134a by using the expressions for phase-change heat transfer and boiling heat transfer coefficient. Vapor qualities of the refrigerants range from 0 to 0.8. As a result, up to the first 30 min, the internal convection resistance is higher than the thermal resistance of the ice on the external surface of the tube. However, after about 30 min, the thermal resistance of the ice increases remarkably due to the increase in the ice thickness. Thus, the heat flux to the refrigerant decreases, and further, the refrigerant quality and the boiling heat transfer coefficient also decrease. As the heat transfer coefficient of R22 is higher than that of R134a, the mass of the ice formed when R22 is used is higher than that formed when R134a is used.

Efficient Opaque Ice Sphere Formation Using a Lightweight Geometric Approach

  • Jong-Hyun Kim
    • Journal of the Korea Society of Computer and Information
    • /
    • v.29 no.3
    • /
    • pp.91-98
    • /
    • 2024
  • In this paper, we present a particle-grid blending framework based on a geometric approach to efficiently represent opaque ice spheres with air bubbles. The water temperature is diffused through the grid and the air bubbles represented inside the ice through the particles. To solve the problem of previous methods that generate noisy dissolved air fields, we use levelsets to lighten the algorithm, i.e., the number of active particles and the initial amount of dissolved oxygen can be used to efficiently control the termination conditions of heat diffusion. We also extend the previous dissolved air field method, which only computes near air bubbles, to transparent regions to represent realistic ice spheres, and introduce a levelset-based approach to accurately compute the orientation of particles. As a result, the method presented in this paper is about three times faster than the existing methods and shows visually improved visualization of opaque ice spheres, which can be used in the field of representing physical virtual ice forms.