• 에너지공학
• /
• 제9권2호
• /
• pp.89-94
• /
• 2000

양흡입 펌프 회전차 내부 유동특성을 수치적으로 고찰하였다. 수치계산은 설계점과 2개의 탈설계점에서 이루어졌으며, Patankar에 의해 제시된 SIMPLE 알고리즘을 이용하였다. 설계점에서는 양 회전차 채널 내부에서 대칭 형상을 갖는 이차유동 특성을 발견하였지만, 탈설계점에서는 비대칭 유동특성을 발견하였다. 수치해석 결과로는 유량감소에 따라 양흡입 펌프 회전차 채널내부의 이차유동 특성이 달라진다는 사실을 고찰하였다. 또한 양흡입 펌프 회전차 단면에는 모퉁이 와류가 존재함을 알 수 있었다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.144-147
• /
• 2008

Intake pump for waterworks is badly damaged by a small amount of cavitation because of variable water quality and severe operation conditions. In general, the required NPSH for reduced cavitation can be provided by inlet condition, supply air, change pump and inducer. But once the pump has been built and installed there is little that can be done to reduce cavitation damage. In this study, we analysed the cavitation of paldang intake pump and intended to avoid the same phenomena.

• 월간 기계설비
• /
• 통권294호
• /
• pp.128-130
• /
• 2015

한국의 제조, 공업, 건설시장의 성장에 따라 국내 펌프 수요도 날이 갈수록 늘고 있다. 이에 대한 수요에 대응하여 펌프전문기업인 한일펌프는 창립 50주년을 맞아 에너지 절감형 개별인버터 펌프 신제품인 쿨런트 펌프를 선보였으며, ALL스테인레스 환풍기 및 송풍기 외 양흡입 송풍기 인라인휀 포터블팬 등 다양한 풍력 제품들도 출시했다. 한일전기는 녹 발생이 없는 ALL스테인리스 펌프를 비롯해 현장 수요에 맞춰 필요 부품의 생산부터 조립 테스트 등 부스터 및 산업용 펌프 24시간 제품 출고 시스템을 구축하는 등 차별화된 서비스를 제공하고 있다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1999년도 유체기계 연구개발 발표회 논문집
• /
• pp.257-263
• /
• 1999

The flow characteristics of double suction pump are investigated by numerically Calculations are performed by using SIMPLE algorithm at the design and off-design points. Symmetric nature of flow fields in blade channels is discovered at design point, but asymmetirc effects are discovered at the off-design point. Numerical results show that the formation of secondary flow in volute of double suction pump shows different trends when compared with the case of single suction pump. Also results show that double vortices are formed in the volute cross section.

• 대한기계학회논문집B
• /
• 제40권6호
• /
• pp.409-415
• /
• 2016

본 연구에서는 유량 $70.7m^3/min$, 양정 87m의 양흡입 원심펌프의 수력 손실 절감을 위해 표면 마찰거칠기를 변화시킨 실험을 수행하였다. 초기 표면 거칠기를 $100{\sim}110{\mu}m$에서 $0{\sim}0.08{\mu}m$로 변경한 후 표면 거칠기 변화가 전체 펌프의 효율 증가 및 펌프 운전시 소요되는 전력 원단위 변화 측정을 수행하였다. 표면 마찰 거칠기 개선 부위는 물과 접하는 펌프 내부 임펠러와 케이싱 표면으로 하였고 코팅 방식을 적용하였다. 그 결과 펌프 효율은 약 0.8~1.79% 증가하였으며, 전력원단위는 4.38 ~ 6.04% 절감 효과를 가져 왔다. 이와 같은 결과는 임펠러 및 내부 케이싱의 표면 거칠기가 펌프의 성능에 작지 않은 영향을 미칠 뿐만 아니라 표면 거칠기 개선을 통해 마찰에 의한 수력 손실을 줄여서 펌프 성능 향상과 상당한 에너지의 절감 효과를 얻을 수 있음을 확인하였다.

• 한국유체기계학회 논문집
• /
• 제13권6호
• /
• pp.51-56
• /
• 2010

A numerical simulation is carried out to investigate the effect of flow rate variation and performance characteristics of double-suction centrifugal pump. Two types of pump which have different impeller inlet breadth and curvature of the shroud line consist of six blades impeller and shroud ring. Finite-volume method with structured mesh and $k-\omega$ Shear Stress Transport turbulence model was used to guaranty more accurate prediction of turbulent flow in the pump impeller. Total head, power and overall efficiency were calculated to obtain performance characteristics of two types of pump according to the variation of flow rate. From the results, impeller having smooth curve along the shroud line obtained good performance. The lower flow rate, the more circulation region, flow unsteadiness and complicate flow pattern are observed. Complicated internal flow phenomena through impellers such as flow separation, pressure loss, flow unsteadiness and performance are investigated and discussed.

• 소음진동
• /
• 제10권3호
• /
• pp.500-507
• /
• 2000

Dynamic forces due to mechanical and hydraulic related causes are always exerted on operating turbomachinery such as centrifugal pumps. To ensure the safety and the reliability of the pump. the magnitudes of the vibration must be kept within an acceptable limit. The focus of this paper is on the identification of the vibration behavior and the quantitative analysis of the hydraulic excitation forces. As the structure becomes more complex finite element analysis is essential to accurately predict the vibration characteristics and the excitation forces, This paper presents an experimental and analytical technique to find and solve to vibration problems in double volute double suction centrifugal pump. Measured vibration data due to the dynamic forces are presented and individual causes are identified, finally excitation forces of the pump are inversely estimated at each frequency on operating conditions.

• 대한기계학회논문집A
• /
• 제24권8호
• /
• pp.1931-1939
• /
• 2000

Operating excitation forces of the linear vibratory system are normally determined by direct measurement techniques using load cells, strain gauges, etc. But, hydraulic forces of the rotating turbomachinery such as centrifugal pumps are exerted on an impeller due to asymmety of the flow by the interaction between pump impeller and volute. So, investigations of wide range of hydraulic designs and geometric deviations are difficult by direct method. This paper presents a hybrid approach for fourier transformed operational excitation forces, which uses pseudo-inverse matrix of the transfer matrix for the system and the measured vibrational data with standard installed pump. The determination of the transfer function matrix is based on a linear rotor/stationary system and steady state harmonic response in finite element analysis. And, vibrational data is collected in both vertical and horizontal directions at inboard and outboard bearing housings. The results of the process may be enhanced by making acceleration measurements at many more locations than there are forces to be determined.