• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.675-684
• /
• 2020

To prevent safety accidents caused by aging pipe infrastructure and to maintain water quality, construction projects for water and sewage pipes are actively conducted across Korea. This study analyzed the criteria situations, site survey details, and regulation revisions related to the calculation of construction cost standards for pipe laying and joining work. The analysis showed that the major causes for revision are the unclear construction scope, limitations in implementing some pipe materials due to installation facility types, workforce focused on ordinary labor, limitations of manual laying work, and the lack of tool hire cost and machine expense-calculation criteria. Field studies were conducted to categorize the pipes according to their features, in addition to identifying the use of lifting heavy equipment and light equipment. In addition, excavation and testing work conducted in connection to pipe laying, as well as the use of skilled labor, were investigated. The current study clarified the work scope through new common items, provides an organization based on the pipe material, adjusted the workforce ratio to focus more on skilled labor, and developed grounds for calculating machine expenses. These revisions were estimated to save approximately 1.28% of the construction costs in each project according to an analysis of the construction cost impact study. truction costs in each project, according to an analysis of construction cost impact study.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.05a
• /
• pp.121-128
• /
• 2006

The results of COD researched on August of 2004 were 6.8 ppm in North Mokpo inner Bay, 4.4 ppm in front of YongSang Bank and 4.6 ppm in front of ShinAn Beach Hotel which is over III level Marine-Environmental Standard. The other five stations sea water quality of Mokpo inner bay were reached II-III level. Concentration of total nitrogen range from 1.23 ppm to 3.56 ppm and total phosphorous was range from 0.07 ppm to 0.12 ppm which were II-III level. This results show that the Mokpo inner bay is unsuitable for aquaculture and growth of fish and for use of marine resort, it can be only available for industrial and harbour use. In results of estimated point source flow into Mokpo inner bay, the occupation ratio from YoungSang river in total inflow of TN and TP were up to 49-89 % respectively. It is indicate that in order to improve the water quality of MokPo inner bay have to control the discharge from YoungSang river first of all, then control the discharge from North Harbour domestic wastewater treatment, InAm river and NamHae domestic wastewater treatment.

• Korean Journal of Weed Science
• /
• v.14 no.4
• /
• pp.298-313
• /
• 1994

Residue of herbicide napropamide [N,N-dimethyl-2-(1-napthoxy)-propionamide] and change of micro-organism were investigated in upland soil under different environmental conditions. Half-lives of degradation were 28.3 days in the sterile soil and 14.6 days in the nonsterile soil, respectively. These results suggest that microorganism remarkably affected the decomposition of napropamide. Napropamide was rapidly degraded in order of 60% > 80% ${\geq}$ 40% soil moisture content of field water-holding capacity. Numbers of bacteria and total microbes in 60% moisture content was more than those in 40% moisture content. The more the napropamide degradation was rapid in lower soil pH. The total number of microorganism increased by lapse of time after treatment of napropamide at pH 5.5. The decomposition rate of napropamide was rapid in the order of $27^{\circ}C$ > $37^{\circ}C$ > $17^{\circ}C$. At $17^{\circ}C$ of soil temperature actinomycetes in napropamide treatment plot was more than these in nontreatment plot and also at $27^{\circ}C$ and $37^{\circ}C$ bacteria in napropamide treatment plot was more than those in nontreatment plot. Napropamide degradation was more rapid and number of microorganism was more abundant at the concentration of 10ppm than at that of 20ppm. The half-life of napropamide was longer in the clay loam soil than in the silty loam soil. The half times in laboratory test than in upland field. Numbers of microbes in the experiment under all the test environmental condition was not significantly different between treatment and nontreatment of napropamide.

• Korean Journal of Weed Science
• /
• v.14 no.4
• /
• pp.272-279
• /
• 1994

In order to compare the biological properties of benfuresate and cinosulfuron as herbicides for the chemical control of Eleocharis kuroguwai, some experiments were conducted at greenhouse and field conditions in 1993. Benfuresate and cinosufuron moved to 2cm and 6cm deep in paddy soil and inhibited the growth of E. kuroguwai. Benfuresate was absorbed into the roots of E. kuroguwai. whereas cinosulfuron was absorbed into not only the roots and shoots but also the mesocotyls. After the emergence was inhibited by the soil application of herbicides, the percentage of regrowing numbers was higher at cinosulfuron than at benfuresate, whereas the growth rate was higher at benfuresate on the contrary. Benfuresate brought about complete death of buds as a killing type, but cinosulfuron produced lots of abnormal shoots as an inhibiting type. Benfuresate was able to apply on soil surface from the preemergence to the early stage of 2cm high, but cinosulfuron was able to use from the preemergence to the stage of 15cm high. The foliar application of cinosulfuron showed a good control effect, but it induced a severe phytotoxicity to rice. A good control effect of Benfuresate/bensulfuron GR lowered at the late stage, but that of cinosulfuron/mefenacet/dymron GR at the early stage maintained until the late stage of 65 days after transplanting.

• Journal of Acupuncture Research
• /
• v.21 no.5
• /
• pp.13-25
• /
• 2004

Objective : Herniation of Nucleus Pulpous(HNP) of Lumbar is the most important reason that causes low back pain. The aim of this study is to investigate the effectiveness of Bee-venom acua-acupuncture therapy for protrusion disc patients. Methods : To evaluate the effectiveness of Bee-Venom Acupuncture Therapy, 20 patients were treated by bee-venom acua-acupuncture therapy. To estimate the efficacy of treatment, we used Quardruple Visual Analog Scale(QVAS). Results : 1. As a objectivity treatment record, they test treatment record good 60%, fair 25%, excellent 15%. 2. After bee-venom therapy, pain rate changed from 8.25 to 2.15. 3. By the results which puts out the statistics in sex, a pain rate of male changed from 8.75 to 2.50, a pain rate of female 7.92 to 1.92. Intentional difference is none as a therapy. By the results which puts out the statistics in age, after forties changed from 7.78 to 2.22 and before forties changed from 7.90 to 1.92. By the results which puts out the statistics in disc herniation, pain rate of central type changed from 8.29 to 2.29, pain rate of left type changed from 8.20 to 1.40, pain rate of Right type changed from 8.00 to 4.00.

• Journal of Acupuncture Research
• /
• v.25 no.1
• /
• pp.121-130
• /
• 2008

Objectives : Cupping therapy is a stimulation therapy similar to acupuncture and moxibustion with effects that differ depending on the degree of stimulus. To make the strength of the skin objective in cupping therapy for this study, we measured negative pressure in the cupping jar and calculated the expansion rate of the skin. Subjects and Methods : In this study, we experimented with cupping therapy jars made for sale and used in clinics. We studied the pressure in the jars and the changes on the skin surface by measuring properties. We used commercial jars of four different volumes and diameters and tried to discover the properties on the size of the jar. Results : The results of experiment with the cupping therapy are as follows: 1. The lowest pressure in a jar was measured at $-600{\sim}610mmHg$, and the number of operating of vacuum pump for reaching lowest pressure was increased recording where the volume of the jar would be big, but the lowest pressure was not increased recording where the size of that would be big. 2. As the vacuum pump continued to operate, the pressure gradient in the jar got smaller which shows that the expansion rate of the skin was not linear. The pressure gradient shows different operational numbers on the vacuum pump near 0mmHg/operation unrelated to jar volume. 3. When negative pressure worked on the jar, air in the jar decreased. The percentage of air gradually reduced as the negative pressure acted in the jar. For example, the percentage of skin was 37-66% when the negative pressure, reatched -500mmHg. According to out results, different test areas generate different percentages of air in the jar, presumably related to skin elasticity. This phenomenon was most pronounced with the smallest jars. 4. At -500mmHg, the expansion rate of the skin was 1.57-1.9 on the abdomen, and $1.52{\sim}1.68$ on the back. The expansion rate of the skin appeared greater when the jar was relatively small, and it appeared smaller when the jar volume was relatively large relatively.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.4
• /
• pp.394-402
• /
• 2017

Purpose: The purpose of this study is to evaluate the displacement of artificial tooth of monolithic complete denture manufactured by milling and 3D printing method in which the denture base and the artificial teeth are simultaneously made. Materials and methods: Twelve upper and lower complete dentures for each were made by milling and 3D printing method. Group Up and Group Lp are a group of upper and lower dentures made by printing, and Group Um and Group Lm are denture groups made by milling. Group Uc and Group Lc are is a group of finally designed upper and lower dentures respectively. Measurements were performed between both central incisors (AB, ab), both canines (CD, cd), both first molars (EF, ef), between an incisor and a first molar (AE, ae), and between incisor and lingual point (AG, ag) for each upper and lower denture. Results: AG and ag value between printed dentures and original ones as well as between milled dentures and original ones showed a statistically significant difference (One-way ANOVA, P<.05) in both lower and upper monolithic dentures. In the lower monolithic ones, ab, cd and ef value revealed a significant difference between Group Lp and Group Lm (One-way ANOVA, P<.05). Conclusion: Dentures made using milling or 3D printers revealed statistically significant difference compared with those of original data. However, it showed clinically very accurate reproducibility.

• Korean journal of applied entomology
• /
• v.18 no.1 s.38
• /
• pp.43-48
• /
• 1979

This study was conducted to detect lead which is exhausted with gas from running automobiles and is considered to accumulate in cropping lands. Soil samples were taken from uplands and paddy fields with different distance from highways. atonic absorption spectrophotometer was applied for analysis. Results obtained are summarized as follows: 1. In the areas of Seoul toll gate and Jookjeon, Gyeonggi province, soils of fields within $3\~5$ meters from highway appeared to contain $11\~110\;ppm$ of lead. On the other hand, soils outside of $3\~5$ meters showed only natural background level of lead. 2. The maximum concentration of lead in Hwoedeuk area (Choong-nam p개vince) was 16.3 ppm and those of Kimhae and Dongrae areas were about 12 ppm. Low concentration of $1\~4\;ppm$ was observed in the areas, south of Daejeon along the Honam and Namhae highways. 3. Lead seemed to accumulate in the soil surface within the range of 0 to 5 centimeters which anable to expect little translocation to deeper layer of the soil. 4. lost of arable lands locates at least 15 meters apart from highways so that lead concentrations were lower than expected. No damage could be speculated with the present concentration of lead analyzed. This does not deny the necessity to the long term dectect of the possible pollutant.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.5 no.2
• /
• pp.63-67
• /
• 1972

Preliminary creel-holding test of live anchovies which are to be used as bait for the skipjact fishery, was conducted on the fish caught by set net and lift net. They were held in the creels constructed with bamboo frame and minnow netting, during the period of Oct. 24-Nov. 28 in 1972. If was found that the survival rate of the creel-held anchovies varied by the size of fish, the towed distance and speed of fish-carrying creel in which the fish were accomodated after catchi. 1. The survival rate of the medium size anchovies, 7.8-9.6cm in length and 4.6-4.8 g in weight, was $70-92\%$ during the holding period of 20-35 days. Whereas, only $16\%$ of juvenile anchovies, 5.3cm in length and 1.0 g in weight, were survived for 19 hours after catch. 2. During the time of transport, the farther and faster the creel containing fish were towed, the less fish were survived in the subsequent holding period. 3. Though both the set net and lift net could be fairly used to catch live anchovy, no decision between these two gears could be made in this experiment to determine the superiorness for the subsequent survival rate.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.6
• /
• pp.33-42
• /
• 2013

In the early stage of P2P, the technology was limited to narrow usage of file sharing, but currently, P2P technology has become essential to maximize the efficiency between associated technologies without additional deployment of high costly infrastructure and also the burden of the server. Especially, P2P media streaming service is a highly attractive service to mobile users. which requires a higher quality in the mobile environment in accordance with the development of technology of wired network as well as better mobile terminals. However, P2P technology should consider the trade-off between 'peer selfishness' and QoE for providing fairness. The P2P system also try to maximize the resource utilization through an incentive mechanism for service differentiation and encourage peers to contribute continuously for improving the overall system performance. In this paper, we propose an point-based incentive mechanism based on peer's contribution level and energy availability for service differentiation. We also introduce that the proposed mechanism efficiently enhances the system performance as the peer with incentive using contribution and energy obtains more effective resource distribution.