• Journal of the Korean Chemical Society
• /
• v.40 no.12
• /
• pp.724-732
• /
• 1996

The organic precipitate flotation using Cu(II)-pyrrolidinedithiocarbamate complex as a coprecipitant was studied for the preconcentration and determination of trace Cd, Pb, Bi and Co in several water samples. Experimental conditions such as pH of solution, amounts of Cu(II) and ammonium pyrrolidinedithiocarbamate(APDC), stirring time, the type and amount of surfactant, etc. were optimized for the effective flotation of analytes. After 3.0 mL of 1,000 ${\mu}g/mL$ Cu(II) solution was added to 1.00 L water sample, the pH of the solution was adjusted to 2.5 with HNO3 solution. Trace amounts of analytes were coprecipitated by adding 2.0% APDC solution. And the precipitates were flotated onto the surface of solution with the aid of nitrogen gas and sodium lauryl sulfate. The floats were collected from mother liquor, and filtered through the micropore glass filter by suction. The precipitates were dissolved with 4 mL conc. HNO3, and then diluted to 25.00 mL with deionized water. The analytes were determined by graphite furnace atomic absorption spectrophotometry. This flotation technique was applied to the analysis of some water samples, and the 90 to 120% of recoveries were obtained from the spiked samples, this procedure could be concluded to be simple and applicable for the trace element analysis in various kinds of water.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.2
• /
• pp.105-116
• /
• 2019

Oil adsorption during hair or body washing is responsible for the hair conditioning. In this study, we established a method to extract oil from a substrate, and to determine amount of adsorbed oil upon substrate using a conventional absorption spectroscopy. We controlled the mole fraction of a surfactant in a mixture of anionic and amphoteric surfactants because that it induces the coacervate that regulates amount of adsorbed oil through the alteration of oil viscosity. Based on this, we established the optimized condition for adsorption and extraction for oil. UV absorbance were employed to estimate the amount of adsorbed oil using optical absorbance after extraction via adsorption. The estimation was confirmed by comparing with a mass analysis in HPLC and an adhesive energy in AFM. It has been proved that this method can be applied to all cases of oil adsorption from the results with various cationic polymers and a complex system of the polymers which regulate the oil adsorption.

• Polymer(Korea)
• /
• v.28 no.1
• /
• pp.18-23
• /
• 2004

Superabsorbent poly(potassium acrylate-co-acrylamide)s were synthesized in particle form using inverse suspension polymerization technique. Mean diameter of the prepared polymer particles decreased from 300 to 50 $\mu\textrm{m}$ with increasing surfactant concentration. The dynamic and equilibrium swelling behaviors during water absorption and drying process were investigated by weight measurement. The swelling ratio of polymer particles in water changed according to not only polymer crosslinking density, but particle size, saline concentration of aqueous medium, and copolymer compositions. Water sorption amount was increased with decreasing particle size, crosslinking agent concentration, and ion concentration in bulk solution. Being different from the water sorption process, the drying process was not significantly affected by particle size, polymer composition, or crosslinking amount.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.999-1005
• /
• 1996

Pt catalyst on carbon black was prepared by colloidal method, ion exchanging method and methanol reducing method. The colloidal method has been used generally. At ion exchanging method, $H^+$ of functional group on carbon surface made by oxidation treatment was exchanged with Pt ion. At methanol reducing method, Pt was impregnated on carbon to reduce by methanol contained with surfactants. With TEM and XRD, Pt particle size impregnated on carbon by various methods was $30{\sim}50{\AA}$. Loading yield was about 100%, loading yield of ion exchanging method was 99.92% by DCP analysis and 99.87% by combustion method. Within 60 hour, current density of oxygen reduction was $460mA/cm^2$ at 0.7V(vs. RHE) at colloidal method. It was the better performance than catalyst prepared by ion exchanging, methanol reducing method. But, it was shown some decrease of performance for long operation time(after 100hour), catalyst prepared by methanol reducing method was shown stable performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.3
• /
• pp.257-259
• /
• 2003

본 논문은 다이오드 레이저와 광 다이오드를 사용한 이중 빗살형 다이오드 레이저 비색 분광기를 개발하여 항균 성분의 양이온 계면 활성제로 널리 사용되고 있는 cetylpyridinium chloride(CPC)의 농도를 측정하였다 분광기의 안정도는 광원의 세기, 감도, 재현성을 측정한 예비 실험을 통하여 검증이 되었다 또한 상용화된 UV/VIS분광기와의 비교 결과를 나타내었다. 다이오드 비색 분광기는 3×10/sup -5/M에서 1.1×10/sup -4/M의 CPC 농도 범위에서 0.9635의 상관계수를 나타내었다. 이러한 결과는 CPC의 농도 분석을 위한 간편한 다이오드 레이저 비색 분광기 개발의 가능성을 나타내었다.

• Journal of the Korean Chemical Society
• /
• v.56 no.2
• /
• pp.188-194
• /
• 2012

The interaction of 4-alkylbenzoic acid isomers with the micellar system of TTAB (tetradecyltrimethylammonium bromide) was studied by the UV/Vis spectrophotometric method. The solubilization constants ($K_s$) of 4-alkylbenzoic acid isomers into the TTAB micellar system and the critical micelle concentration (CMC) of TTAB have been measured with the change of temperature. Various thermodynamic parameters have been calculated and analyzed from those measurements. The results show that the values of ${\Delta}G^o{_s}$ for the solubilization of all the isomers are negative and the values of ${\Delta}H^o{_s}$ and ${\Delta}S^o{_s}$ are all positive within the measured temperature range. The effects of additives (n-butanol and NaCl) on the solubilization of 4-alkylbenzoic acid isomers have been also measured. There was a great change on the values of $K_s$ and CMC simultaneously with these additives. From these changes we can postulate that the solubilization sites of 4-alkylbenzoic acids are the core or deep palisade region of the TTAB micelle.

• Applied Chemistry for Engineering
• /
• v.22 no.5
• /
• pp.473-478
• /
• 2011

The interaction of para-halogenated benzoic acid isomers with the micellar system of tetradecyltrimethylammonium bromide was studied by the UV/Vis spectrophotometric method. The solubilization constants ($K_s$) of benzoic acid isomers into the micellar system of TTAB and the critical micelle concentration (CMC) of TTAB have been measured with the change of temperature. Various thermodynamic parameters have been calculated and analyzed from those measurement. The results show that the values of ${\Delta}G^{\circ}{_s}$ for the solubilization of all isomers are negative and the values of ${\Delta}H^{\circ}{_s}$ and ${\Delta}S^{\circ}{_s}$ are all positive within the measured temperature range. The effects of additives (n-butanol and NaCl) on the solubilization of benzoic acid isomers have been also measured. There was a great decrease on the values of $K_s$ and CMC simultaneously with these additives. From these changes we can postulate that the solubilization sites of each isomers in the TTAB micellar system are the surface or the palisade region of the micelle.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.1
• /
• pp.43-47
• /
• 1998

This study was performed to remove the dissolved benzene in water by using TMA-Zeolite complex which was formed by the adsorption of TMA(Tetramethyl ammonium), a kind of ration surfactant on a natural zeolite produced in Korea. The dorminant clay minerals of the natural zeolite was identified by X-ray diffractometry and Infrared spectrophotometry to be mordenite and clinoptilolite. The CEC of the zeolite used was 95.9 cmol/kg. TMA was adsorbed on natural zeolite very quickly, and the amount of TMA adsorption on zeolite was known to be equivalent to about 8% of the CEC of natrual zeolite. The amount of benzene adsorption on TMA-zeolite complex was much more than natural zeolite, indicating that the dissolved benzene in water could be removed effectively by TMA-zeolite comple.

• The Korean Journal of Mycology
• /
• v.20 no.1
• /
• pp.72-76
• /
• 1992

The extraction and separation methods of protein-bound polysaccharides from the mycelium and culture broth of Coriolus versicolor (Fr) Quel were investigated. The use of 2% solution of surface active agent Triton X-100, was effective for extraction of the protein-bound polysaccharides from the mycelium. For the separation and partial purification of the protein-bound polysaccharides, the column chromatography using DEAE-Cellulose and DEAE-Sephadex proved to be effective.

• The Journal of the Korea Contents Association
• /
• v.16 no.5
• /
• pp.660-667
• /
• 2016

Conventional decontamination methods utilize water-based systems, which generate high amounts of secondary wastes. Herein, we describe an environmentally benign decontamination method using liquid and supercritical $CO_2$. The use of $CO_2$ as a solvent affords effective waste reduction by its ability to be recycled, thereby leaving be hind only the contaminants upon its evaporation. In this study, a $CO_2$ solution process was assessed using t-salen(t-butylsalen), DC18C6 (dicyclohexano-18Crown6), 8-HQN(8-hydroxyquinoline), NEt4PFOSA(perfluoro-1-octanesulfonic acid tetra-ethyl ammonium salt), and NEt4PFOA(pentadecafluorooctanoic acid ammonium salt) to extract spiked radioactive contaminants(Nb,Zr,Co,Sr) from an inert sample matrix, namely filter paper. With the static extraction method, Sr was extracted with a maximum extraction rate of 97%, and Nb was extracted with a maximum extraction rate of 75%. Additionally, we were also able to extract Co and Zr with maximum extract ion ratesof 73% and 64%, respectively.