• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.4
• /
• pp.604-610
• /
• 1989

This paper is concerned with the machinability of fine ceramics(Al$_{2}$O$_{3}$) by using sintered diamond tools. For this purpose, ceramics cutting experiments under various cutting conditions such as cutting speed, feed rate, and others were carried out. The main results are follows : (1) During the cutting of fine ceramics, the used tools were found to be slightly chattering at cutting speed of 70m/min, and at cutting speed of higher than this I found the fine ceramics difficult to be cut. (2) When I used a tool with large nose radius, there occured a small amount of wear on the flank of the tool. However, at the early stage of fine ceramics cutting, the tools with smaller nose radii were required mainly to prevent the chipping of the ceramics. (3) When the materials were dry-cut, the appropriate cutting speel was found to be lower than 40m/min, and when the materials were dry-cut, I could cut them without any difficulty even at the speed of 70m/min, the surface roughness of ceramics cut at the speed of 70m/min was considerly fine. (4) It is generally believed that the principal cutting force is the largest in the case of steels cutting, but I found the thrust cutting force to be larger than any other cutting forces in the case of ceramics cutting.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.9
• /
• pp.1119-1129
• /
• 2011

Shot-peening effects on the fatigue behavior of bearing steel were investigated under the high cyclic loading. Hourglass shape specimens were made of bearing steel(JIS-SUJ2) for rotary bending fatigue tests. Two kinds of treatments were performed : a heat treatment and a shot-peened surface treatment after the heat treatment. The fracture surfaces of specimens were classified into two types of fracture mode : the surface fracture mode induced by a surface defect and the internal fracture mode induced by a nonmetallic inclusion. Inclusion depth and shape affected considerably the fatigue life. Shot-peening treatment improved much the fatigue life of the bearing steel under low and high levels of cyclic loads. Probabilistic-stress-life (P-S-N) curves were suggested for the reliable fatigue life estimation of the improved bearing steel.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.52 no.3
• /
• pp.247-255
• /
• 2019

This study was conducted to investigate the effects of extrusion pressure and particle size of feed ingredients on the growth performance and plasma hormone activity in juvenile olive flounder Paralichthys olivaceus. Experimental diets were prepared with extrusion pressure manipulated by screw speed [low pressure (LP), 885 rpm/min; high pressure (HP), 708 rpm/min] and different dietary particle sizes [specific surface area: small (SS), $169.9m^2/kg$; large (LS), $67.4m^2/kg$] in a two-level factorial design. Four experimental diets (LP+SS, LP+LS, HP+SS, and HP+LS) were randomly assigned to 12 tanks (3 replicates) stocked with 20 fish (initial weight, 57 g) per tank. After a 4-week feeding trial, the observable trends of the main effects of extrusion pressure and particle size on growth performance showed that LP and SS enhanced fish weight gain. The plasma insulin-like growth factor-I level was significantly higher in fish fed the LP+SS diet than in fish fed the HP+SS diet. These results indicate that manipulation of the physical qualities of feed through adjustment of extrusion pressure and feed ingredient particle size may influence the growth performance of juvenile olive flounder, which should be considered in feed manufacture.

• Korean Journal of Heritage: History & Science
• /
• v.49 no.3
• /
• pp.4-11
• /
• 2016

This study compares eight bronze spoons in the Goryeo Dynasty and analyzes their components and lead isotopes in order to confirm the relationship between their production sites and excavation sites. Most of the excavated spoons have elliptical heads, and their handles are categorized into two types. Bronze spoons are made of binary Cu-Sn alloys, but Pb is not added. The same artifacts can have different trace elements depending on location, and the spoons had high Ag content. According to an analysis of their lead isotopic ratio, they were made with raw materials produced in Zone 3 of the South Korean galena map. If the data of the trace elements in the raw ores of the bronze is accumulated, it can be used to indicate the provenance of the artifacts.

• Journal of Marine Life Science
• /
• v.7 no.1
• /
• pp.37-44
• /
• 2022

This study was performed to obtain information on the sex ratio, size at sexual group maturity, and main spawning period of Glyptocephalus stelleri. The sex ratio (female: male) was 1:0.54 (n=189:103, 64.7% female), and the frequency of females in the population tended to increase with total length. The oocyte development pattern was group synchronous development, in which oocyte groups at different stages were identified within the same ovary. The total length at 50% sexual group maturity was analyzed using a logistic regression model, and was determined to be 28.51 (female) and 30.49 cm (male). The gonadosomatic index (GSI) displayed the highest values in April (female) and March (male), and the main spawning period being in April to May.

• Tunnel and Underground Space
• /
• v.32 no.2
• /
• pp.93-106
• /
• 2022

This study developed applications that allows truck drivers to record ore production data using smart devices at mine sites and to create a daily work report (operation report) in a PC environment. For this, four operating mines in Korea were selected as study areas, and daily work reports used there were investigated. The information elements included in the daily work report of each mine were analyzed. Because the information to be collected for writing ore production data and format of report are different for each mine, four types of applications were developed for the study areas. Ore production data could be recorded by receiving a signal from a Bluetooth beacon and by operating the application directly by the truck driver. The collected data files are uploaded to the cloud server, and the uploaded data files can be converted into a daily work report using the developed applications in a PC environment.

• Journal of Marine Life Science
• /
• v.7 no.1
• /
• pp.55-59
• /
• 2022

This study was conducted to provide basic information on the sexual mature and reproductive biology of Trichiurus lepturus. During the oogenesis, size of oocyte and nucleus showed the increase tendency but size ratio of nucleolus to nucleus was decreased. In the result of H-E stain, the stainability of the cytoplasm was changed from basophilic to eosinophilic. The egg diameter of initial vitellogenic oocyte was about 63.2 (±12.7) ㎛. In the cytoplasmic cortex, eosinophilic yolk nucleus was observed. The size of mature oocyte was 216.6 (±24.7) ㎛ and GVBD (germinal vesicle breakdown) was observed. The size of ripe oocyte was 317.9 (±80.9) ㎛ and the thickness of zona radiata was 4.2 (±1.7) ㎛. The oocyte developmental type is considered to belong to the group synchronous type. The accumulation of yolk in the oocyte, like most teleost, is thought to be of two types: exogenous and endogenous accumulation.

• Journal of Practical Engineering Education
• /
• v.14 no.2
• /
• pp.361-366
• /
• 2022

Recently, with the development of virtual and augmented reality technology, metaverse is emerging as a new paradigm that will lead the next-generation internet era, and social and economic activities are spreading around the game, entertainment, music, and content industries. Moreover, as non-face-to-face conversion accelerated after the outbreak of COVID-19, lifestyles and industrial sites are becoming untact and further rapidly becoming a metaverse. In particular, the application of metaverse to the education field is attracting attention because realistic classes using real-time voice conversations using avatars, 3D objects, and 360-degree images can increase immersion and overcome the limitations of distance education. This study examines the concept of metaverse and examines that education using metaverse can be an alternative that can increase the efficiency of education in the non-face-to-face era. In particular, it shows that it is effective in language education and suggests an actual metaverse-based Korea language education program.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.5
• /
• pp.35-43
• /
• 2023

Along with the increase in Multi-unit housing defect disputes, the importance of defect management is also increased. However, previous studies have mostly focused on the Multi-unit housing's 'common part'. In addition, there is a lack of research on the system for the 'management office', which is a part of the subject of defect management. These resulted in the lack of defect management capability of the management office and the deterioration of management quality. Therefore, this paper proposes a machine learning-based defect data management system for management offices. The goal is to solve the inconvenience of management by using Optical Character Recognition (OCR) and Natural Language Processing (NLP) modules. This system converts handwritten defect information into online text via OCR. By using the language model, the defect information is regenerated along with the form specified by the user. Eventually, the generated text is stored in a database and statistical analysis is performed. Through this chain of system, management office is expected to improve its defect management capabilities and support decision-making.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.12 no.1
• /
• pp.29-38
• /
• 2010

This research was conducted to improve a hill seeding technology under puddled wet soil condition for direct seeded rice. There were severe constrains in hill sowing method under puddled wet soil such as a bird damages, dryness of seeds sown due to strong sunlight in May and buoyancy of seeds and young seedlings after raining and irrigation particular under strong wind. Thus, we have adopted a sandy type(<2mm) silicate covering method in Bokto drill seeding technology for a hill seeding method as well. The average silicate amount in order to cover seeds sown was of 840kg/ha which was evaluated to a proper volume for those problem solution and farmer's handling during sowing operation. In this experiment there was an additional problem like a precious hill drop of rice seeds, covering of silicate over hill seeded rice and seed broken during roller operation.