• Geophysics and Geophysical Exploration
• /
• v.8 no.2
• /
• pp.156-162
• /
• 2005

Particularly in research related to seawater intrusion the change of fluid electrical conductivity is one of major concerns, and effective monitoring can help to optimize a water pumping performance in coastal areas. Special considerations should be given to the mounting of sensors at proper depth during the monitoring design since the vertical distribution of fluid electrical conductivity is sensitive to the characteristics of seawater intrusion zone. This tells us the multi-channel electrical conductivity monitoring is of paramount consequence. It, however, is a rare event when this approach becomes routinely available in that commonly used commercial stand-alone type sensors are very expensive and inadequate for a long term monitoring of electrical conductivity or water level due to their restricted storage and difficulty of real-time control. For this reason, we have developed a real-time monitoring system that could meet these requirements. This system is user friendly, cost-effective, and easy to control measurement parameters - sampling interval, acquisition range, and others. And this devised system has been utilized for the electrical conductivity monitoring in boreholes, Yeonggwang-gun, Korea. Monitoring has been consecutively executed for 24 hours, and the responses of electrical conductivity at some channels have been regularly increased or decreased while pumping up water. It, with well logging data implemented before/after pumping water, verifies that electrical conductivity changes in the specified depths originate from fluid movements through sand layer or permeable fractured rock. Eventually, the multi-channel electrical conductivity monitoring system makes an effective key to secure groundwater resources in coastal areas.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.1
• /
• pp.1-11
• /
• 2012

The equation of the step-drawdown test "$s_w=BQ+CQ^p$" written by Rorabaugh (1953) is suitable for drawdown increased non-linearly in the fractured rocks. It was found that value of root mean square error (RMSE) between observed and calculated drawdowns was very low. The calculated $C$ (well head loss coefficient) and $P$ (well head loss exponent) value of well head losses ($CQ^p$) ranged $3.689{\times}10^{-19}{\sim}5.825{\times}10^{-7}$ and 3.459~8.290, respectively. It appeared that the deeper depth in pumping well the larger drawdowns due to pumping rate increase. The well head loss in the fractured rocks, unlike that in porous media, is affected by properties of fractures (fractures of aperture, spacing, and connection) around pumping well. The $C$ and $P$ value in the well head loss is very important to interpret turbulence interval and properties of high or low permeability of fractured rock. As a result, regression analysis of $C$ and $P$ value in the well head losses identified the relationship of turbulence interval and hydraulic properties. The relationship between $C$ and $P$ value turned out very useful to interpret hydraulic properties of the fractured rocks.

• The Journal of Engineering Geology
• /
• v.15 no.4 s.42
• /
• pp.407-421
• /
• 2005

This study aims to investigate hydrogeological properties of the central area from Yangjeong-Dong to Sujeong-Dong in Busan Metropolitan City. For this study, pumping tests were carried out in the bedrock aquifer of Yangjeong-Dong and the unconsolidated aquifer near Busanjin railway station. The pumping test in the bedrock aquifer containing the Dongrae fault revealed specific hydraulic characteristics with respect to the fault. The pumping test in the unconsolidated aquifer revealed the hydrogeologic properties of both coastal landfill and fine sediments. It was found that the Moench's sphere-shaped dual-porosity model fits the bedrock aquifer, whereas the Neuman's uncofined aquifer model accords with the unconsolidated aquifer. The average transmissivity and storage coefficient of the bedrock aquifer are $2.75{\times}10^{-5}m^2/s\;and\;6.41{\times}10^{-5}$ and those of the unconsolidated aquifer are $8.24{\times}10^{-4}m^2/s\;and\;3.70{\times}10^{-3}$, respectively. On the other hand, slug tests gave average transmissivity and storage coefficient values of $9.84{\times}10^{-4}m^2/s\;and\;1.21{\times}10^{-2}$, respectively.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.6
• /
• pp.57-67
• /
• 2010

Specific yield is an essential parameter of the water table fluctuation method for recharge calculation. Specific yield is not easily estimated because of limited availability of aquifer test data and soil samples at National Groundwater Monitoring Stations in South Korea. The linear relationship between rainfall and water level rise was used to estimate the specific yields of aquifer for 34 shallow monitoring wells which were grouped into three clusters. In the case of Cluster-1 and Cluster-2, this method was not applicable because of low cross correlation between rainfall and water level rise and also a long lag time of water level rise to rainfall. However, the specific yields for 19 monitoring wells belonging to Cluster-3, which have relatively high cross correlation and short lag time, within 2 days after rainfall, range from 0.06 to 0.27 with mean value of 0.17. These values are within the general range for sand and gravel sediments and similar to those from aquifer test data. A detailed field survey is required to identify monitoring sites that are not greatly affected by pumping, stream flow, evapotranspiration, or delayed response of water levels to rainfall, because these factors may cause overestimation of specific yield estimates.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.339-342
• /
• 2002

지하수의 인공함양특성을 해석하기 위한 기초조사로서 대구 낙동강변의 강변여과수 개발지역인 충적층내에 부존하는 자연수의 지구화학적 특성을 살펴보았다. 특히 관측공 중 한 공에는 다중패커시스템 (Multi-packer system)을 설치하여 보다 체계적인 심도별 변화를 살펴보았다. 전체적으로 시추공 및 지표수에 대한 현장측정자료는 시기별로 큰 차이를 보이지 않지만 EC값의 경우 장기양수시험이 시작된 시기부터 급격히 낮아지는 경향을 보인다. 연구지역의 자연수는 Ca-HCO$_3$형에서부터 Ca-SO$_4$형에 속하며 특히 미량원소로서 Mn의 함량이 매우 높게 나타나고 있다. 인위적 오염의 지표인 NO$_3$함량은 현재 양수정에서 ~10mg/L 정도의 함량을 보이고 있으며 이밖에 다중패커가 설치된 관측공의 경우 최상부 (6m)에서 ~40mg/L의 높은 함량을 보여준다. 다중패커시스템에 의해 채취된 시료에 대해 심도에 따른 변화를 살려보면 Na, Ca, Mg, HCO$_3$의 함량이 심도에 따라 증가하고 있고, 음이온 중 Cl과 SO$_4$의 경우는 맨 하부구간일 18m에서 채취된 시료들이 시료채취시기와 관계없이 매우 낮은 값을 보인다. 미량원소의 경우 문제가 되는 Mn은 시료채취시기와 관계없이 중간구간인 13.5m구간에서 특히 많은 함량을 보이고 있다. 따라서 강변 여과수로 개발하기 위한 장기양수시험에 있어서 높은 Mn 및 NO$_3$함량에 대한 보다 체계적인 연구와 충적층을 구성하고 있는 모래층, 자갈층, 암반층에 대한 추가 연구가 필요한 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.290-290
• /
• 2020

연구지역인 충청남도 홍성군 갈산면 신곡마을은 상시 가뭄지역으로서 농번기 물부족을 겪고 있으며, 물 확보의 수단으로서 지하수 인공함양이 고려되고 있다. 본 연구에서는 수치모델을 이용하여 수직정 방식의 지하수 인공함양시 주입 효과를 예비 평가하였다. 모델 지역은 가로 세로 2,450 × 2,350 m로서 10 × 10 m 간격의 격자로 구성하였으며, 현장에서 실시된 지하수위 조사 및 9공의 시추조사, 1개공의 양수시험 결과로부터 수리전도도, 지층분포 등을 구성하였다. 정류모델결과, 실측 및 예측 지하수위의 표준오차(Standard error of the estimate)는 0.53 m, 표준화제곱근오차(Normalized RMS)는 6.79%, 상관계수는 0.99%로 나타났다. 수직정을 통한 주입 효과를 평가하기 위하여, 주입량을 5 ㎥/d, 10 ㎥/d, 15 ㎥/d, 20㎥/d, 주입기간을 1일, 3일, 7일, 우물의 개수를 1개, 3개, 5개일 때 등 다양한 조건하에서의 부정류 모델을 수행하였다. 이로부터 주입의 효과인 지하수위 상승량 및 상승 범위 등을 토대로 물 부족 기간의 인공함양 시나리오(주입정의 위치, 갯수, 심도, 기간 등)를 예비적으로 제시하였으며, 추후 정밀 모델 및 실제 현장 주입 시험 등을 토대로 인공함양 설계를 추진할 예정이다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.341-344
• /
• 2009

본 연구에서는 허브 대 팁의 비가 큰 원심형 압축기의 성능시험을 수행하였으며, 이를 수치해석 결과와 비교하였다. 압력비의 경우 작동 회전수에서 성능시험과 수치해석의 결과의 경향이 일치하는 것을 확인하였다. 성능시험에서 임펠러의 성능은 매우 높게 나타났으나, 1단 및 2단 디퓨져에서 손실이 발생하여 전체적인 압력비 및 효율이 떨어지는 것을 확인하였다. 수치해석을 통해 내부 유동장을 확인한 결과 1단 디퓨져 및 2단 디스월러에서 격렬한 2차 유동으로 인한 유로차폐효과가 주 손실원인임을 확인하였다.

• Aerospace Engineering and Technology
• /
• v.3 no.1
• /
• pp.65-78
• /
• 2004

This research was conducted for an acquisition of the ramjet engine test facility design technique which are concerned about freejet type test facility. In this research, we concentrated on the design technique and the construction technique of the vitiation air heater(VAH), test section, diffuser and ejector. Based on the operating modes of the basic test facility, ten operating modes in coordinates "Altitude-Mach number" was regenerated from Mach 2, Altitude 0km to Mach 5, Altitude 15km. In this operating modes, we calculated a design parameter of the supersonic nozzle, VAH, diffuser and ejector and acquired a technique for the ramjet test facility operating and repairing.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.6
• /
• pp.53-60
• /
• 2006

Single well injection withdrawal tracer tests with bromide were carried out at two wells developed in a horizontally heterogeneous fractured rock. The hydraulic conductivity of TW-1 well was 5 times larger than TW-2 well, and the average linear velocity of TW-2 well was 1.8 times faster than TW-1 well. The difference of hydrodynamic dispersions of two wells in the fractured rock was studied with the analysis of concentration breakthrough curves and cumulative mass recovery curves of bromide with withdrawal time, and the estimation of average travel distance, pore velocity, longitudinal dispersivity and longitudinal dispersion coefficient. The average travel distances of bromide were estimated to be 3.00 m in TW-1 well and 5.62 m in TW-2 well. The average pore velocities for the injection/withdrawal phase were estimated to be $4.31\;{\times}\;10^{-4}\;m/sec$ in TW-1 well and $8.08\;{\times}\;10^{-4}\;m/sec$ in TW-2 well. Average travel distance and pore velocity were higher in TW-2 well because of small effective porosity. Longitudinal dispersivities were estimated to be 28.73 cm in TW-1 well and 18.49 cm in TW-2 well, and bromide transport was 1.55 times faster in TW-1 well. Longitudinal dispersion coefficients were estimated to be $5.14\;{\times}\;10^{-6}\;m^2/sec$ in TW-1 well and $6.06\;{\times}\;10^{-6}\;m^2/sec$ in TW-2 well, and diffusion area was 1.18 times larger in TW-2 well.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.487-491
• /
• 2004

For tile hydrogeological data of the National Groundwater Monitoring Wells(NGMW), a statistical analysis is made to reveal aquifer characteristics of the country. Results of the pumping and recovery test are classified into 4～5 types by the pattern of drawdown and residual drawdown curves. The analysis of aquifer characteristics shows that the hydraulic conductivity of alluvial aquifers is greater than that of fractured-rock aquifers. The hydraulic conductivity of alluvial aquifers slightly increases as the distance to the discharge area decreases. 77.5% of the NGMWs, where the distance to the discharge area is more than 100m, shows the constant head boundary. This result suggests that the fractured and the alluvial aquifers are fairly interconnected, and water can be supplied from one aquifer to tile other where pumping tests are performed. It is analyzed that the wells showing the impermeable boundary are influenced by small scale of aquifers, poor aquifer transmissivities, and impermeable layers.