• Journal of Distribution Science
• /
• v.5 no.2
• /
• pp.55-78
• /
• 2007

Northeast Asia is one of the regions which have been developing so rapidly. Yellow sea, located between Korea and China, became a very important logistical zone because of its huge volume of cargo and big passenger traffic. These two countries continuously are enlarging their port facilities such as berths, container yards, storage capacity and their information system in this the Pan Yellow sea area. Two countries also introduce many new liner routes and car-ferry shipping services. Therefore there must be a severe competitions and conflicts among the countries and their companies and ports as well. Some experts worry about the over capacity of port and logistics facilities. This paper investigated the current conditions of Korea-China shipping route, container and car-ferry route, and found out the problems and tasks, with the support of many experts. There are so many alternatives and strategies to solve and rationalize the shipping route and the problems of ports of two countries. This paper suggest many strategies connecting with marketing 4Ps. As port service is also a kind of service product, we can categorize the strategies into 4Ps suggested by McCarthy. And this paper classify all these alternatives into 3 dimensions. There are competitive strategies, cooperative strategies and coopetition strategies. This paper propose some directions and ideas for adopting the strategy in the port and logistical topics between Korea and China, suggesting 3 dimensions of strategies. After this paper, many diagnoses and practical investigations should be executed to introduce optimal solutions and minimize the additional cost.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.2
• /
• pp.177-185
• /
• 2007

Even though there were no clear definitions of the short game and short game distance, short game capability is crucial for a good golf score. Generally, chip shot and pitch shot are regarded as two principal components of the short game. Chip shot is a short, low trajectory shot played to the green or from trouble back into play. Pitch shot is a high trajectory shot of short length. Biomechanical studies were conducted usually to analyze full swing and putting motions. The purpose of the study was to reveal the kinematical differences between professional golfers' 30 yard $53^{\circ}wedge$ chip shot and $56^{\circ}wedge$ pitch shot motions. Fifteen male professional golfers were recruited for the study. Kinematical data were collected by the 60 Hz three-dimensional motion analysis system. Statistical comparisons were made by paired t-test, ANOVA, and Duncan of the SPSS 12.0K with the $\alpha$ value of .05. Results show that both the left hand and the ball were placed left of the center of the left and right foot at address. The left hand position of the chip shot was significantly left side of that of the pitch shot. But the ball position of the pitch shot was significantly right side of that of the chip shot. All body segments aligned to the left of the target line, open, at address. Except shoulder, there were no significant pelvis, knee, and feet alignment differences between chip shot and pitch shot. These differences at address seem for the ball height control. Pitch shot swing motions(the shoulder and pelvis rotation and the club head travel distance) were significantly bigger than those of the chip shot. Club head velocity of the pitch shot was significantly faster than that of the chip shot at the moment of impact. This was for the same shot length control with different lofted clubs. Swing motion differences seem mainly caused by the same shot length control with different ball height control.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2002.11a
• /
• pp.63-70
• /
• 2002

The main subject to become a hub pen is automation The automated container terminal has already operated in advanced pons and it bas been planned for the basic planning and operation design in domestic case. The key of automated container terminal is effective operation of both ATC(automated transfer crane) and AGV(automated guided vehicle) which is automated handling equipments. This is essential to productivity of automated container terminal. This study suggests the moat optimal method of equipment operation in order to minimize loading time using each three types of effective AT operation methods and AGV dispatching rules in automated container terminals. As the automated equipment operation causes unexpected deadlocks or interferences, it should be proceeded on event-based real tine. Therefore we propose the most effective ATC operation methods and AGV dispatching rules in this paper. The various states occurred in real automated container terminals are simulated to evaluate these methods. This experiment will show the most robust automated equipment operation method on various parameters(the degree of yard re-marshaling, the number of containers and the number of AGVs).

• Journal of Korea Port Economic Association
• /
• v.27 no.4
• /
• pp.187-205
• /
• 2011

In considering the size of container logistic flow of Korea, one-port as a hub port is desirable in Busan Port, but as development of Busan Port and Gwangyang Port began as two-ports, they are good as mega hub ports. In case when ports of other regions such as Incheon Port are additionally developed, it is very likely that they become feeder ports rather than mega hub ports. As capital area uses Incheon Port and Pyeongtaek Port for transportation, fierce competition arises due to excessive facilities of terminal companies and it is not easy to be profitable. Therefore, it is more profitable to develop regional hub ports centering on near-sea routes of Korea China Japan rather than local ports such as Incheon Port and Pyeongtaek Port for intensive trade and transportation in the capital area. To mitigate excessive competition between container terminal companies, we need administrative guidance to maintain adequacy through comparing tariffs between ports of Japan and China which are in competitive relations with Korean ports. This study analysed efficiency of container terminal companies in Gwangyang Port, Busan Port and Incheon Port using data for five years from 2006 to 2010. As analytical variables, length of quay, floor area of yard, the number of cranes and employees were analytical variables and a total freight volume was a productive factor.

• Journal of Korea Port Economic Association
• /
• v.29 no.3
• /
• pp.159-174
• /
• 2013

This paper mainly deals with the appropriation of ship voyage allocation, using a heuristic regression model, in order to reduce total costs incurred in port, yard and at sea under the specific port condition. Because of different behavior of costs incurred in port, yard and at sea, an effort to minimize these costs by adjusting the number of voyages for three ship classes(50,000, 100,000, and 150,000-ton) should be made. For instance, if the port managers attempt to reduce the sea transport cost by increasing the annual allocated number of ship voyages classed 150,000-ton for economies of scale, they have no choice but to suffer a significant increase in queueing cost due to port congestion. To put it differently, there are trade-off relationships among the costs incurred in port, yard, and at sea. We utilized a computer simulation result to perform a couple of regression analyses in order to figure out the appropriate range of allocated number of voyages of each ship class using a heuristic approach. The detailed analytical results will be shown at the main paper. We also suggested a net present value(NPV) model to make a proper investment decision for an additional berth of 200,000-ton class that alleviates port congestion and reduces transport cost incurred both in port and at sea.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.3
• /
• pp.161-168
• /
• 2023

Converter slag is a by-product generated by refining the pig iron produced into molten steel in the blast furnace, occupying about 15 % of the weight of steel production. It has a high free-CaO content that can generate expansion cracks when used for concrete aggregate. This is the main reason to make it difficult to recycle. To solve this problem, government guideline requires that converter slag has to be aged in an open yard for 90 days. However, aging can not be perfectly performed because it entails time and cost. In this study, we tried to investigate the applicability of converter slag as a cementitious material rather than an aggregate by mixing converter slag with mortar formulations. According to the EDS results of the converter slag in the experiment, we found that screening in the aggregate phase was more effective than that in the powder phase. When the particles separated by a magnet in the aggregate state were pulverized and used for concrete up to a 15 % replacement ratio, various engineering characteristics, such as flow, length change, and compressive strength, showed engineering characteristics similar to those of the control mix.

• Journal of Korea Port Economic Association
• /
• v.40 no.2
• /
• pp.39-52
• /
• 2024

As the 'Eco-friendly conversion project for Port's CHE(Cargo handling Equipment) ' which has started in 2014 ends in 2024, in addition to the existing 'Low pollution' paradigm to respond to fine dust problems, a full-fledged 'Zero-emission' conversion is to be required to implement 2050 carbon neutrality at the port level. Accordingly, this study calculated the future replacement demand for container handling equipments at the four major domestic ports(Busan, Incheon, Yeosu Gwangyang, and Ulsan), and assumed a scenario where every CHE supposed to eb replaced is electrified inturn every year. And then the resulting future emission reduction effect accordingly was calculated and analyzed. In particular, compared and analyzed the emission outlook applying the life-cycle concept(LCA), which is being adopted as a new emission calculation standard in most industrial fields, and the existing emission calculation concept that only considers direct emissions within the port, to provide more effective implications for the promotion of follow-up conversion projects. According to the analysis results, if the CHE is replaced according to the proposed schedule, it is expected that the existing emissions can be reduced by 79% compared to BAU in 2025 and 97.4% in 2030. However, if the LCA is applied, it is expected to be reduced by only 27.6% by 2030. This suggests that port's CHE must be converted to zero emissions and at the same time establish an Ports' self-sufficient energy grid based on renewable energy.