• KSBB Journal
• /
• v.10 no.3
• /
• pp.335-342
• /
• 1995

Solid and liquid phase peroxidases were extracted from Chinese cabbage roots by using commercial juicer in order to use peroxidases from agricultural waste for industrial applications. Since peroxidases are distributed into 66% in liquid (juice) and 34% in solid phase (pulp), enzymes from both phases were applied to investigate the enzymatic removal of phenol from waste water. After contacting 150 ppm Phenol solution with liquid phase enzyme (1,800 unit/$\ell$) for 3 hours in a batch stirred reactor, 96% of phenol could be removed through polymerization and precipitation. Also, phenol could be removed from initial 120ppm to 5ppm by applying solid phase enzyme in an air lift reactor ($600 unit/\ell$). Almost equivalent efficiencies of phenol removal were observed between two systems, even though only one third of the enzymes in batch stirred reactor was applied in airlift reactor. The possible reason for this phenomenon is because peroxidases exist as immobilized forms in solid phase.

• Korean Journal of Environmental Agriculture
• /
• v.15 no.1
• /
• pp.116-127
• /
• 1996

Recent development in Japan on jumbo formulation of pesticides for paddy application by hand throw was reviewed. In addition, the diffusion of liquid formulations in water was examined to establish the research strategy for the jumbo formulation. Research on jumbo formulation in Japan has been focused on gas-generating formulations and self-emulsifiable formulations. Although continuous efforts to minimize the problem of pesticide deposit on the treated site have been made for the gas-generating formulations, much work is still needed to establish a generally acceptable formulation method and to commercialize a herbicide formulation. The self-emulsifiable jumbo formulations have recently been investigated. These formulations could simply be processed and showed relatively high biological efficacy. The emulsifiable concentrate was more diffusible than the suspension concentrate in water. The diffusion of the emulsifiable concentrate was not greatly disturbed by floating obstacles. And the diffusion rate was high when the specific grabity was lower than one.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.31-38
• /
• 2014

Seismic of the Korean Peninsula is terrible about 1,900 times. Lately, because of a world-occurring seismic, investment of seismic design about ground & structures come to the force as means to protect national life and property. This study evaluated having seismic performance above design criteria among the existing port structures not applied seismic design. Based on the results, classified apprehensive area of liquefaction from seismic performance evaluation and made hazards according to liquefaction risk & structural performance using the analysis of seismic performance and GIS method. After Establishing quantitative & detailed input database through liquefaction evaluation and seismic performance, analysed all seismic data are used directly valuation data on repair reinforcement for apprehensive area of earthquakes.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.7
• /
• pp.29-38
• /
• 2018

Three-dimensional continuum modeling of dynamic soil-pile-structure interaction embedded in a liquefiable sand was carried out. Finn model which can model liquefaction behavior using effective stress method was adopted to simulate development of pore water pressure according to shear deformation of soil directly in real time. Finn model was incorporated into Non-linear elastic, Mohr-Coulomb plastic model. Calibration of proposed modeling method was performed by comparing the results with those of the centrifuge tests performed by Wilson (1998). Excess pore pressure ratio, pile bending moment, pile head displacement-time history according to depth calculated by numerical analysis agreed reasonably well with the test results. Validation of the proposed modeling method was later performed using another test case, and good agreement between the computed and measured values was observed.

• 연구논문집
• /
• s.30
• /
• pp.111-119
• /
• 2000

Sintering of alumina powder was studied in the presence of Y-Si oxide and oxynitride additives. The main crystalline phase of the sintering aids pre-reacted at $1400^{\circ}C$ was $\alpha$ - $Y_2$$SiO_2$>$O_7$. Y-N apatite was co-existed in the Si-40N sintering aid because of its high content of N. During the sintering process, liquid phases were formed by the reaction between additives and alumina, and these liquid phases promote the densification of alumina. SEM micrographs showed that uniform grain growth occurred in the system with oxide additive(Si-0N). In the case of oxynitride additive system(Si-20N and Si-40N), bimodal microstructure was observed due to the exaggerated grain growth, As the nitrogen content in the additive system increased the exaggerated grain growth occurred extensively. Bloating, which seemed to be originated by the liberation of $N_2$ gas, occurred un the Si-40N oxynitride additive system.

• Membrane Journal
• /
• v.8 no.4
• /
• pp.228-234
• /
• 1998

Among various water contaminents, organic compounds like phenol are difficult to be removed or destroyed by conventional methods under the unusual discharge conditions. The separation of phenol from aqueous solution has been carried out by several methods recently: absorption by an activated carbon, solvent extraction and liquid membrane technology. The liquid membrane based on water-oil emulsification has been tested as an alternative technology of the conventional technology. In this work, tri-n-butyl phosphate(TBP) and liquid polymers were examined as a liquid membrane in the supported liquid membrane(SLM). The feed concentration of phenol was varied and various types of liquid membranes were used to examine their effects on separation of phenol. It was found that TBP, polypropylene glycol 4000(PPG 4000) and polybutytene glycol 500(PBG 500) were proper carriers because mass transfer rates through them were much higher than or similar to that through methyl isobutyl ketone(MIBK) which was used as a conventional solvent in a solvent extraction process.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.15-17
• /
• 2012

파, 해저지반 및 해안 해양구조물과의 관계는 해안공학뿐만 아니라 지반공학 분야에서도 중요한 이슈중의 하나이며, 파랑에 의한 해저지반 내부의 압력 및 응력의 파악은 다양한 해안 해양 구조물의 기초 설계 및 해저 연안 지반의 불안정성 검토에 있어서 중요한 과제이다. 해저 지반의 불안정에 대한 문제 중, 파랑에 의한 해저지반의 액상화는 기존의 연구를 통하여, 두개의 메커니즘이 존재한다는 것이 밝혀졌으며, 이는 각각 파랑에 의해 해저지반 내부에 발생하는 과잉간극수압의 변동 특성 및 잔류 특성에 따른 것이다. 이 연구에서는 중복파에 의해 해저지반 내부에 에 발생하는 과잉간극수압에 대하여 수치해석을 하였으며, 발생하는 과잉간극 수압 중 잔류 과잉간극수압의 발생 특성과 실험 결과를 비교 분석하였다.

• 발명특허
• /
• v.27 no.5 s.311
• /
• pp.68-74
• /
• 2002

본 발명은 키토산으로 이루어진 무수히 많은 갯수의 박막필름이 시트 평면에 수직, 수평 또는 경사 방향으로 일정간격의 공간을 유지하면서 적충되어서 라멜라구조를 형성하고 이 박막필름들이 일정한 간격으로 가지런히 나열되어 형성된 키토산 마이크로 플레이크로 이루어진 층상 격막시트에 관한 것이다. 두께 $1\mu{m}$내지 $50\mu{m}$로 라멜라구조를 이루는 키토산 박막필름이 $1\mu{m}$내지 $10000\mu{m}$의 공기간격을 두고 누적층을 형성하고 시트평면과$0^{\circ}C$내지$180^{\circ}C$사이의 일정 각도로 균일하게 배열되어 있어 수직, 수평 또는 경사방향으로 키토산 박막필름이 가지런히 배열되어 있는 키토산으로 조성된 수용성 층상 격막시트에 관한 것이다. 본 발명은 키토산을 약산성 액상에서 용해, 숙성 시켜 추출 고화 시키는 과정에서 수직, 수평 및 경사방향으로 키토산 마이크로 플레이크가 층상 라멜라구조를 이루는 키토산 격막시트를 형성시켜 줌으로 임상의학적 적용시 각각의 키토산 박막필름 사이의 균일한 공간으로 다양한 약물의 적용이 가능하며 특히 액상의 약재를 적용시 모세관의 원리에 따라서 약물이 원활하게 공급되는 약전성이 매우 우수하고 약물의 포집성이 획기적으로 부과된 재료로 사용될 수 있으며 키토산을 용해시켜 이용하는 산업에서 물에 신속하고 완전한 용해특성을 나타내는 키토산 원료물질로 사용될 수 있는 것이다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.4
• /
• pp.272-277
• /
• 2009

The liquid phase LPG injection (LPLi) system (the 3rd generation technology) has been considered as one of the most promising fuel supply systems for LPG vehicles. To investigate the reaction characteristics of LPG with rubber parts in LPLi system, various rubbers were tested. The results showed that the amount of residue from the cover rubber of a fuel pump was increased about 10 times after testing. Furthermore, the amount of sulfur and nitrogen species which are considered as main sources of deposit formation in LPLi fuel injectors were also found to be higher than those in original LPG fuel. In addition, these residues made the core parts of LPLi injector such as needle and nozzle, partially worn, which eventually causes leakage in LPLi injectors.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.77.1-77.1
• /
• 2011

슬러리 기포탑 반응기는 열 및 물질 전달의 용이성, 낮은 운전비용 및 장치의 간단성의 장점을 가지고 있어서 Fischer-Tropsch 반응, bio-reaction 등에 많이 응용되고 있다. 특히, 반응물은 기체 상태로 반응기에 투입이 되는데, 이 기포입자의 상승하는 힘을 바탕으로 기상/액상/고상이 균일하게 혼합되게 된다. 많은 연구자들이 이러한 기포탑 반응기의 성능을 개선하고자, 다양한 반응기 디자인에 대하여 보고하고 있다. 특히 반응기 내부에 tray를 설치함으로써, 기포 포집율을 증진시기고 액상의 역류를 최소화시키는 연구가 활발히 진행되고 있다. 본 연구에서는, 다양한 기공크기를 갖는 tray를 활용함으로써 높이에 따른 기포 포집율의 변화 및 반응기 내에 기포 입자의 거동 특성에 대하여 살펴보았다.