• Journal of the Korea Convergence Society
• /
• v.10 no.8
• /
• pp.159-164
• /
• 2019

The front bumper of bobsleigh is mounted to alleviate the impact, but the air resistance to the bobsleigh depends on the body shape positioned in front. This study was conducted the flow analyses about three kinds of bobsleigh configurations. Models B and C with the sharp type of the front can reduce the air resistance than model A with the round type of the front. And the type that the back of the bumper narrows can generate a flow smoother than the one widening. It is thought that the results of this study can be devoted at ensuring the body design to reduce the flow resistance most at bobsleigh. As the design data with the durability of bobsleigh obtained on the basis of this study result are utilized, the esthetic sense can be shown by being grafted onto the machine or structure at real life.

• The Science & Technology
• /
• v.29 no.10 s.329
• /
• pp.100-101
• /
• 1996

무독성으로 대기 수질오염이 없고 화재의 위험도 없는 수성 폴리우레탄을 개발한 부산대 고분자공학과 김병규교수. 자동차 범퍼에 이용되는 고분자합금 개발 등의 연구를 계속하고 있는 김교수는 앞으로 통신ㆍ환경분야 관련 고분자소재 개발에도 참여할 계획이다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.6
• /
• pp.125-132
• /
• 2002

Bumpers are structural components to reduce physical damage to the front and rear ends of a passenger motor vehicle from low speed collisions. Damage assessment and the protectiveness are the commonly used designing criteria but in this study, relative displacements of the bumper are examined. To absorb the crash energy without significant damage to the bumper itself, foam material is installed between fascia and beam. However, it is not easy to predict the exact displacements generated in bumper structures through FEM because the compressive stress-strain curve of a foam material depends on strain rates that deviates significantly on each trial. Under this uncertain condition, a range of displacements is calculated and the optimum design is performed using the design of experiments. The result will be used to find the design that minimizes the weight within displacement constraints. The orthogonal array of L9 is introduced to find the optimum of the design variables that considers the thickness of inner beam, outer beam and stay, This study will suggest the design procedure of a front bumper using the uncertain stress-strain curve of a foam material.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.85-95
• /
• 2017

This study aims to identify the throw distance in terms of truck weight, bumper height, and speed in a truck and pedestrian collision, and to propose a model for throw distance estimates. For this purpose, a simulation analysis is performed using the PC-crash program with the following experiment conditions: Truck weight of 5t, 15t, and 25t, Bumper height from 0.3m to 0.6m by 0.1m, and speed from 10km/h to 100km/h by 10 km/h. Experimental results show that the truck speed and bumper height are found to be significant factors for pedestrian throw distance, but truck weight is not a significant factor. Also, a regression model is developed for pedestrian throw distance estimate from the multiple regression analysis. The adjusted $R^2$ value of the model is 93.3%, which is very good explanatory power.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.672-675
• /
• 2000

본 논문에서는 차량의 뒷바퀴 윤곽을 이용하여 근거리 전방차량을 인식하는 방법에 대해 설명한다. 차량 앞범퍼 중앙에 장착된 흑백 CCD 카메라에서 입력되는 영상을 분석하면 전방차량의 뒷바퀴 바깥쪽 윤곽이 수직성분을 띄며 도로면과 명확하게 구분됨을 알 수 있다. 이 특징을 이용하여 일정거리 이내에 존재하는 전방차량을 탐지할 수 있다 또한 탐지된 차량까지의 대략적인 거리를 계산할 수 있고, 브레이크등의 점등 여부를 판단할 수 있다. 이 방법은 차량간 간격이 좁고 저속으로 주행하는 도심지 도로에서 가다서다를 반복하는 Stop-and-Go 차량을 구현하는데 적용될 수 있을 것이다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10b
• /
• pp.562-564
• /
• 2003

지능형 교통 시스템(intelligent traffic system)의 필요성은 컴퓨터비전기술의 발전에 따라 성장해오고 있다. 지능형 교통 시스템의 바람직한 방법들 중 하나는 비전처리를 통하여 자동차의 수를 계수하는 것이다. 차량이 포함된 도로 이미지들은 디지털 카메라에 의하여 촬영된다. 우선적으로 이미지에서 도로의 중앙선 오른쪽부분은 제외한다. 단순히 개개의 차량을 분리해 나는 것은 겹치는 문제, 그림자, 조명과 같은 많은 문제점을 가지고 있다. 차량계수를 목적으로 이미지를 세밀히 조사하다가 보니 낮에는 차량의 앞 범퍼 끝의 그림자로 밤에는 헤드라이트 불빛으로 차량을 식별할 수 있다는 것을 알 수 있었다. 이 논문에서는 그림자분석을 통한 차량계수를 다루었다. 이 특징을 사용하여 차량을 계수하여 만족할만한 정확성을 성취하는 것이 이 논문의 목표이다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.4
• /
• pp.673-679
• /
• 2013

This study investigates the strength durability of an automotive front bumper subjected to vibrations during driving. Through structural analyses,the maximum equivalent stresses of models 1 and 2 were found to be 187.09 and 278.4 MPa, respectively. The maximum deformations of models 1 and 2 were 1.3772 and 2.675 mm, respectively. As model 1 shows less deformation than model 2, itis stronger than model 2. Models 1and 2 show natural frequencies within 230 Hz as the range of the maximum harmonic response frequency. Models 1 and 2 have maximum amplitude displacements of 0.105 and 0.154 mm at critical frequencies of 159 and 110 Hz, respectively. As model 1 has a higher critical frequency than model 2, it has more strength durability than model 2. This study result can be effectively utilized for the design of a front bumper by investigating prevention against damage and its strength durability.