Journal of the Korean Society for Aeronautical & Space Sciences
/
v.32
no.7
/
pp.19-28
/
2004
This study is concerned with the method of equilibrium-pressure prediction from transient data. Pressure measurement system consisted of pressure sensor and pressure tube. The surface orifice where pressure is measured is connected to a pressure sensor by a tube. In case of high orifice pressure, the pressure sensor responds rapidly to the orifice pressure. But when the orifice pressure is low the pressure sensor does not respond rapidly to the orifice pressure and time lag occurs seriously. Various test conditions are applied to investigate the time lag and to assess the methods of equilibrium-pressure prediction. The test time of the low-pressure measurement can be reduced by the method of equilibrium-pressure prediction of the present study.
Journal of the Korean Society of Propulsion Engineers
/
v.12
no.1
/
pp.7-15
/
2008
Pressure Sensitive Paint(PSP) means a reacting paint in pressure. The calibration of PSP and the wind tunnel test of PSP painted model are required to measure pressure by using PSP. Therefore, the post processing from these results shows the information and image of the pressure distribution. PSP can show the information of total pressure from the wind tunnel test and the calibration. In this study, equipments of PSP are composed, and experiment is accomplished by using PSP. The surface pressure distribution around the wall of nozzle is measured by PSP. The measured pressure has similar results to those of the CFD and pressure tap measurement.
본 연구에서는 사출 성형에서 Cavity내의 압력을 측정하여 사출 성형기에서의 설정한 변수 즉, 사출 압력에 따라 Cavity내의 압력이 사출 공정동안 어떠한 추이를 나타내는지 관찰하였다. 이를 CAE 해석과 비교 분석하여 결과에 따른 점도 함수와의 관계를 알아보았다. 우선 Cavity의 압력을 측정하기 위하여 Cavity 내에 압력센서를 설치하고, 이를 시간에 따른 압력측정 결과를 보기 위하여 압력센서 시스템을 제작 하였다. 실제 사출성형하면서 Cavity 내 압력을 측정하고 CAE 해석 결과의 압력 변화와 비교한다. 이때 일반적으로 CAE 해석과 실험결과가 일치하지 않으므로 새로운 점도 곡선을 추정하여 CAE 소프트웨어 D/B(Data Base) 파일에 입력하여 다시 해석하고 실험 결과와 비교하여 압력변화가 일치할 때까지 반복해서 수행한다. 이때 점도는 Power Law로 가정하여 D/B 파일에서 K와 n값을 조절할 수 있고 일반적으로 n값은 Base Resin과 동일하므로 K값의 변화만을 고려하여 압력변화를 해석한다.
슬릿트나 관형의 흐름에서 유체의 유변학적 성질을 측정하기 위해서는 벽면에서의 압력구배를 알아야한다. 벽면에서의 압력측정은 특히 관형의 경우 압력구멍의 존자가 불가 피하다. 압력구멍에 의한 오차에 대한 이론적인 고찰이 있었지만 사용된 몇가지 가정이 실 험적인 과찰과 일치하지 않아 이들 이론에 대한 강한 의문을 제기하고 한다. 한편 실험적인 결과는 묽은 고분자 용액인 경우 측정압력에 대한 상대적인 압력구멍 오차가 무시할 수 없 을 정도로 크다. 압력구멍 오차는 압력구멍의 크기, Reynolds 수 (점성) 및 Weissenberg 수 (탄성)의 함수로 나타나고 있다. 그러나 농도가 비교적 높은 고분자 용액이나 용융체는 상대 적으로 무시할 수 있을 정도의 압력구멍 오차를 나타낸다.
본 논문에서는 뇌압을 측정하기 위해 LC 공진을 이용한 압력센서를 제작하고 그 성능을 시험하였다. 원격 측정용 압력센서는 움직이는 전극역할을 하는 p+ 박막이 있는 실리콘 기판과 고정된 평면 코일이 있는 유리 기판으로 구성되어 있다. 압력에 따라 두 전극 간의 간격이 달라지고 이에 따른 캐피시턴스가 변화하여 공진주파수가 변화하게 된다. 원격 측정용 외부 안테나를 이용하여 측정회로의 공진 주파수에서 위상의 변화를 측정하여 압력을 측정한다. 상부기판은 실리콘 기판을 도핑하여 p+ 막을 형성하고 금속막을 증착하여 전극을 형성한 후 실리콘을 식각하여 완성하고. 하부기판은 유리 기판 위에 금속막을 증착한 후. 전기도금으로 평면 코일을 형성하고 다시 금속막을 증착하여 전극을 형성하여 제작한다. 압력을 변화시킬 때 전극간의 간격의 변화에 따른 공진주파수에서의 위상의 변화를 외부 안테나에 연결된 측정회로를 통해 측정한다. 측정결과 공진주파수인 160 Mhz에서 -0.08 $deg/mmH_2O$의 감도를 얻을 수 있었다.
Proceedings of the Korean Vacuum Society Conference
/
2012.08a
/
pp.132-132
/
2012
압력 $10^{-9}$ Torr 이하의 초고진공(ultrahigh vacuum) 영역에서의 압력 측정에는 수 mA의 열전자로 잔류 가스를 이온화시켜 그 이온 전류를 측정하는 이온게이지를 주로 사용한다. 압력이 $10^{-12}$ Torr영역 이하인 극고진공(extreme high vacuum: XHV) 영역에 진입하면, ESD (electron stimulated desorption) 효과 등에 의한 이온 게이지 자체의 가스방출률이 커져 정확한 압력 측정이 곤란해 진다. 극고진공 영역에서 이온 게이지는 수 와트(W) 이상의 전력을 사용하여 수 mA의 열전자를 방출시키나, 신호인 이온 전류의 양은 1pA 이하이기 때문에 열전자에 의해 발생되는 백그라운드 전류에 묻혀 신호 전류가 측정되지 않는다고 할 수 있다. 100 nm 이하의 곡률을 가진 뾰족한 금속 탐침에 강한 전기장을 걸어주면 고체 내부의 전자가 터널링 효과에 의해 진공 중으로 방출되며, 이를 전계방출(Field Electron Emission) 효과라 부른다. 전계 방출 전류량은 탐침 표면의 일함수에 의존하며, 일함수가 클수록 지수함수 적으로 감소한다. 금속 표면에 진공 중의 잔류 가스가 부착하면 일함수가 증가한다. 가열에 의해 전계방출 탐침의 표면을 세정한 후에 전자 빔을 방출 시키면, 표면에 가스 분자가 흡착하여 방출 전류량은 점점 감소한다. 감소 속도는 압력에 비례하며, W(310) 탐침의 경우 $10^{-10}$ Torr 영역에서는 수분만에 최초 전류값의 1% 이하로 감소한다. 전계방출 전류의 감소속도가 압력에 비례하는 현상을 이용하여 압력을 측정하였다. Extractor Ionization Gauge 측정값 $5{\times}10^{-12}-3{\times}10^{-10}$ Torr의 범위에서 (111) 방향으로 정렬된 텅스텐 단결정 탐침을 사용하여 방출전류의 로그값을 시간의 함수로 semilog그래프를 그리면, 그래프는 직선을 그리며 그 기울기가 압력에 비례함을 알 수 있었다. 기울기 값과 게이지 측정값은 $10^{-11}{\sim}10^{-10}$ Torr 영역에서 거의 완벽한 비례관계를 보여주었으나, $10^{-12}$ Torr 영역에서 게이지 측정값은 기울기 값에서 추출한 압력치보다 높은 값을 보여주었으며, 이는 게이지 백그라운드 전류에 의한 차이라고 생각된다. W (310) 탐침의 방출전류는 그 감소속도가 W (111) 탐침과 마찬가지로 압력에 비례하였으나, 전류-시간 그래프는 가열 세정 직후에 전류가 거의 감소하지 않는 $2{\times}10^{-10}$ Torr에서 약 10분간 지속되는 '안정 영역'이 존재함을 보여주었다. '안정 영역'은 $10^{-11}$ Torr 영역에서는 수십분, $10^{-12}$ Torr 영역에서는 수시간 이상으로 증가하였다. 초-극고진공 영역에서의 잔류가스 주성분인 수소에서 물, 일산화탄소등의 가스로 바뀌면 '안정 영역'은 사라졌고, 이는 '안정 영역'이 수소 흡착에 의해서만 나타나는 고유 현상임을 말해준다.
Journal of the Korean Society for Aeronautical & Space Sciences
/
v.42
no.1
/
pp.1-9
/
2014
The present study was conducted by using fast-responding PSP technique to measure the surface pressure on a small-scale rotor blade in hover. Also, the study was performed to verify the accuracy and investigate its possibility of PSP application for rotor blade pressure measurement. Pulsed laser which has 532 nm wavelength was used as a light source. Lifetime measurement technique was applied. Also, the coated paint on a rotor blade was porous PSP which has faster response time than conventional PSP. The blades had NACA0012 airfoils. The length of rotor blade was 340 mm and chord was 40 mm with rectangular shape 1 set, and 4 sets had several tip sweepback angles. The measured results qualitatively showed that the upper surface pressure decreases with increasing the collective pitch angle. Quantitative pressure coefficients of PSP results were higher approximately 0.4 to 0.7 than the pressure tap data of the NASA experiment.
Proceedings of the Korean Vacuum Society Conference
/
2010.02a
/
pp.468-468
/
2010
유도 결합 플라즈마에서 기체 유량에 따른 전자 에너지 분포 측정과 그에 따른 플라즈마 밀도와 전자 온도의 변화를 관찰하였다. 기체 압력 제어는 조임 밸브 (Throttle valve) 부근의 압력측정을 통한 조임 밸브 조절 방법을 이용하였으며, 이 방법은 공정 플라즈마에서 널리 쓰이는 압력 조절법이다. 낮은 기체 유량에서 측정된 전자 에너지 분포는 두 개의 온도 그룹을 갖는 bi-Maxwellian 분포를 보였다. 하지만, 기체 유량이 증가함에 따라서 전자 에너지 분포는 Maxwellian 분포로 전이를 하였으며, 플라즈마 밀도의 증가와 전자 온도의 감소를 보였다. 이러한 분포 함수의 변화는 기체 압력이 증가함에 따라 나타나는 전자 가열 모드 전이 현상과 일치하였으며, 이는 압력 조절부와 방전 공간 사이의 압력 구배에 의한 것으로 여겨진다. 이러한 결과는 방전 공간과 압력 조절부에서의 기체 압력 측정을 통하여 검증되었으며, 간단한 유체 모델을 통하여 설명될 수 있다.
Journal of the Korean Society for Aeronautical & Space Sciences
/
v.45
no.7
/
pp.531-538
/
2017
A flush air data sensing system, which can predict flight speed, angle of attack, and angle of sideslip of the aircraft is designed and manufactured for a small UAV. Two kinds of flush pressure ports, four ports and five ports, are tapped at the same section of fuselage nose-cone. Calibration pressure data at flush ports are obtained through computations for the total aircraft by using Fluent code. Angle of attack, angle of sideslip, total pressure, and static pressure are represented with 4th-order polynomial function and calibration coefficient matrix is obtained using least square method with calibration pressure data. Flight test showed that flight speed, angle of attack, and sideslip angle predicted by four flush ports and five flush ports compared well with those by five-hole probe installed for data comparison. Especially four flush ports revealed nearly same results as those by five flush ports.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.