• 항공우주시스템공학회지
• /
• 제11권3호
• /
• pp.8-15
• /
• 2017

본 논문에서는 압전유압펌프가 적용된 브레이크 등가 유압회로를 구성하고, 유압회로의 가감압 특성 실험 및 부하압 제어에 대한 연구를 수행하였다. 유압회로의 가감압 특성을 파악하기 위해 펌프 입력 전압에 따른 부하압 형성 실험을 수행하였고, 솔레노이드 밸브 특성이 감압에 미치는 효과를 파악하는 실험을 수행하였다. 가압 특성 실험을 통해 유압회로의 부하압 상승에 필요한 과도응답시간은 압력상승 구배를 조절하는 전압제어를 적용하여 개선할 수 있음을 확인하였고, 감압시는 솔레노이드 밸브 특성을 활용한 밸브 개폐시간 제어와 전압제어를 통해 과도응답시간 개선이 가능함을 확인하였다. 본 연구에서 개발된 제어기법을 적용하여 부하압 제어실험을 수행한 결과, 가압의 경우 10ms 이내로, 감압의 경우 30ms 이내로 과도응답시간을 개선할 수 있었다. 본 연구에서 제안된 부하압 제어기법은 압전유압펌프가 적용된 유압 브레이크 회로의 부하압을 제어하는데 매우 유용할 것으로 판단된다.

• 한국인터넷방송통신학회논문지
• /
• 제20권5호
• /
• pp.79-88
• /
• 2020

본 연구에서는 태양광 패널 청소 로봇이 진공 패드 압력을 이용하여 경사진 패널 위를 미끄러짐 없이 효율적으로 주행하는 방법을 제안한다. 이 방법에서는 로봇을 경사로 패널에 고정시키기 위해 로봇 발에 부착된 고무 패드의 압력을 진공으로 만들게 된다. 구동 방식으로 Linkage 매커니즘을 적용하여 미끄러짐을 방지함과 동시에 중량을 감소하여 소모전력을 낮추는 방법을 제안하였다. 로봇의 안전한 구동을 위하여 솔레노이드 밸브, 근접 센서, 엔코더를 사용하여 로봇의 움직임을 감지하며, 주행할 때 고무 패드의 압력을 제어하여 안전한 경사로 주행을 가능하게 하였다. 로봇의 전진 동작을 위하여 다중의 솔레노이드 밸브들의 동작 시퀀스를 완성하여 양쪽 발에 부착된 6개의 진공패드가 진공 및 대기압을 정확하게 형성 할수 있도록 제어하여 이동 중 미끄러짐 없이 전진할 수 있게 하였다. 마지막으로 주행 및 회전 실험을 통해 36도의 태양광 패널에서 직진 및 회전 동작을 수행할 수 있음을 확인하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 춘계학술대회
• /
• pp.760-761
• /
• 2011

본 연구에서는 치과용 유니트체어의 용수공급 시스템 중 수관 내부에 생성되는 바이오필름을 보다 효율적으로 제거하기위하여 공기와 물을 혼합한 버블을 생성하고 가변적인 압력을 인가하여 살균과 세척을 동시에 수행할 수 있는 시스템을 개발하고자 하였다. 이를 위하여 공기와 물의 혼합 세척을 통한 바이오필터 세척 및 전기분해를 이용한 용수 살균 시스템을 구현하였으며, 물과 공기의 흐름제어 및 가변적인 압력 조절 제어시스템을 구현하였다. 그리고 무선으로 제어가 가능한 솔레노이드밸브로 구성된 벨브조립체를 구성하여 세척모드 및 용수공급모드의 선택적 운용이 가능한 시스템을 구현하였다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.565-568
• /
• 2006

This paper achieved dynamic characteristics with test to use solenoid valve for flight model that have present. Designed pressure control virtual system which PWM solenoid valve to use test result. Examination compared solenoid valve dynamic characteristics in atmosphere and cryogenic fluid and presented technique and valuation method that measured upstream and down stream pressure of solenoid valve, as well as, temperature, excitation voltage etc. These test results could confirm solenoid valve response time and maximum using frequency characteristic at use in atmosphere and cryogenic temperature and this derived design variables pressure control system from those bases.

• 조명전기설비학회논문지
• /
• 제26권7호
• /
• pp.84-91
• /
• 2012

In this paper, design by magnetic analysis software and proportional control of solenoid for pressure valve for electric pressure cooker is described. The validation of design was proved by 3D finite element analysis results. Also the efficiency of an air ventilation mechanism was considered when pressure was happened by fluid analysis results. The linear proportional control system by AVR was manufactured and its validation was proved by pressure control of solenoid.

• 대한기계학회논문집B
• /
• 제20권1호
• /
• pp.284-294
• /
• 1996

In this paper, dynamic characteristics of an AT clutch system were investigated considering the dynamics of check ball and hydraulic control valves. Dynamic model of a pressure control solenoid valve (PCSV) was obtained by Bondgraph and permeance method. Also, the clutch piston and check ball dynamics were modeled by considering the effect of centrifugal force of the oil entrapped in the clutch chamber. In order to validate the dynamic models obtained, plunger displacement of PCSV and pressure response of the clutch supply lines were compared with the available experimental data, which were in good accordance with the numerical results. Using the dynamic model of the clutch system, simulations were performed to investigate the effect of the rotational speed on the response of clutch cylinder pressure, clutch piston and check ball displacement, and oil flow rate into the cylinder and flow rate out of the check valve.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1784-1787
• /
• 2005

In this paper, proportional modulator which controls the second pressure of the pneumatic system was studied and proportional operating of modulator was gotten by two digital valves that have a fast dynamic characteristics and were controlled by PWM operating method. In order to more precision pressure control, this modulator consist of not only high speed two digital valves but also pressure sensor, measurement equipment and controller having a microprocessing function. In this study, for the development of the new proportional modulator, various research such as PWM control method, test equipment manufacturing, testing and evaluation were accomplished.

• 한국정밀공학회지
• /
• 제11권6호
• /
• pp.127-135
• /
• 1994

This paper is concerned about a high speed electromagnet of Pressure control solenoid valve. Solenoid valve is controlled by means of Pulse width modulation. The magnetostatic field problem on a solenoid is numerically solved by the 2-D axisymmetric finite element method. And permeance method is adopted for analysing the static and dynamic property of solenoid part theoretically. In addition, in this study, experiments on solenoid part were performed in order to measure the magnetic force and plunger displacement. The numerical results coincided with the experimental results. As a result, the magnetic force has the linear relation with displacement of plunger and the primary factors on the performance of PWM type high speed electromagnet are coil resistance, plunger mass, and the length of air gap between plunger and core.

• 한국정밀공학회지
• /
• 제25권3호
• /
• pp.109-114
• /
• 2008

The solenoid valve of ABS hydraulic modulator is a two directional on-off valve and is controlled by around 100Hz on-off control. When the on-off valve is switched from open state to closed state, there are braking force deterioration, noise and vibration due to surge pressure in the wheel cylinder. In this study, identifies surge pressure in the braking process of ABS, and investigates the way to reduce the phenomenon. To reduce the surge pressure, PWM(Pulse Width Modulation) control with high frequency of 20kHz was attempted. In conclusion, by using the results of this study for the pressure surge prediction, we could expect enhancement of braking performance in ABS.

• 한국공작기계학회논문집
• /
• 제13권2호
• /
• pp.69-74
• /
• 2004

In general the surge pressure generated in hydraulic systems causes noise, vibration and odd effect to the system. To reduce the surge pressure, high frequency PWM control of 20KHz was attempted. To estimate the braking noise caused by surge, a vehicle equipped with on-board ABS hydraulic modulator has been experimented with respect to the various breaking condition. Thorough this experiments, it was found that breaking noise has been reduced using high frequency PWM control method compare with low frequency method. To evaluate high frequency control m practice, including verification of general functionality, EMI tests was experimented. Its was found that it is necessary to have the solution to electromagnetic interference(EMI) generated by switching elements.